JAJSN80E データシート

JAJSN80E August 2009 – May 2022 TCA9535

PRODUCTION DATA

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）

PW|24
- MPDS363A
RGE|24
- MPQF124G
DB|24
- MPDS509
RTW|24
- MPQF167C

サーマルパッド・メカニカル・データ

RGE|24
- QFND008AA
RTW|24
- QFND062N

発注情報

6.5 Electrical Characteristics

over recommended operating free-air temperature range (unless otherwise noted)

PARAMETER			TEST CONDITIONS	V_CC	MIN	TYP⁽¹⁾	MAX	UNIT
V_IK	Input diode clamp voltage		I_I = –18 mA	1.65 V to 5.5 V	–1.2			V
V_PORR	Power-on reset voltage, V_CC rising		V_I = V_CC or GND, I_O = 0			1.2	1.5	V
V_PORF	Power-on reset voltage, V_CC falling		V_I = V_CC or GND, I_O = 0		0.75	1		V
V_OH	P-port high-level output voltage⁽²⁾		I_OH = –8 mA	1.65 V	1.2			V
				2.3 V	1.8
				3 V	2.6
				4.75 V	4.1
			I_OH = –10 mA	1.65 V	1
				2.3 V	1.7
				3 V	2.5
				4.75 V	4
I_OL	Low-level output current	SDA	V_OL = 0.4 V	1.65 V to 5.5 V	3			mA
		P port⁽³⁾	V_OL = 0.5 V	1.65 V to 5.5 V	8
		P port⁽³⁾	V_OL = 0.7 V	1.65 V to 5.5 V	10
		INT	V_OL = 0.4 V	1.65 V to 5.5 V	3
I_I	Input leakage current	SCL, SDA Input leakage	V_I = V_CC or GND	1.65 V to 5.5 V			±1	μA
I_I	Input leakage current	A2–A0 Input leakage	V_I = V_CC or GND	1.65 V to 5.5 V			±1	μA
I_IH	Input high leakage current	P port	V_I = V_CC	1.65 V to 5.5 V			1	μA
I_IL	Input low leakage current	P port	V_I = GND	1.65 V to 5.5 V			–1	μA
I_CC	Quiescent current	Operating mode	V_I = V_CC or GND, I_O = 0, I/O = inputs, f_SCL = 400 kHz, No load	5.5 V		22	40	μA
				3.6 V		11	30
				2.7 V		8	19
				1.95 V		5	11
		Standby mode	V_I = V_CC, I_O = 0, I/O = inputs, f_SCL = 0 kHz, No load	5.5 V		1.5	3.9
				3.6 V		0.9	2.2
				2.7 V		0.6	1.8
				1.95 V		0.6	1.5
			V_I = GND, I_O = 0, I/O = inputs, f_SCL = 0 kHz, No load	5.5 V		1.5	8.7
				3.6 V		0.9	4
				2.7 V		0.6	3
				1.95 V		0.4	2.2
C_I	Input capacitance	SCL	V_I = V_CC or GND	1.65 V to 5.5 V		3	8	pF
C_io	Input-output pin capacitance	SDA	V_IO = V_CC or GND	1.65 V to 5.5 V		3	9.5	pF
C_io	Input-output pin capacitance	P port	V_IO = V_CC or GND	1.65 V to 5.5 V		3.7	9.5	pF

(1) All typical values are at nominal supply voltage (1.8-, 2.5-, 3.3-, or 5-V V_CC) and T_A = 25°C.

(2) Each I/O must be externally limited to a maximum of 25 mA, and each octal (P07–P00 and P17–P10) must be limited to a maximum current of 100 mA, for a device total of 200 mA.

(3) The total current sourced by all I/Os must be limited to 160 mA (80 mA for P07–P00 and 80 mA for P17–P10).