SNVSA40A October   2014  – March 2016 TPS61169

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Simplified Schematic
  5. 5 Revision History
  6. 6 Pin Configuration and Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Soft Start-Up
      2. 8.3.2 Open LED Protection
      3. 8.3.3 Shutdown
      4. 8.3.4 Current Program
      5. 8.3.5 LED Brightness Dimming
      6. 8.3.6 Undervoltage Lockout
      7. 8.3.7 Thermal Foldback and Thermal Shutdown
    4. 8.4 Device Functional Modes
      1. 8.4.1 Operation With CTRL
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Inductor Selection
        2. 9.2.2.2 Schottky Diode Selection
        3. 9.2.2.3 Output Capacitor Selection
        4. 9.2.2.4 LED Current Set Resistor
        5. 9.2.2.5 Thermal Considerations
    3. 9.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12Device and Documentation Support
    1. 12.1 Device Support
      1. 12.1.1 Third-Party Products Disclaimer
    2. 12.2 Community Resources
    3. 12.3 Trademarks
    4. 12.4 Electrostatic Discharge Caution
    5. 12.5 Glossary
  13. 13Mechanical, Packaging, and Orderable Information

パッケージ・オプション

メカニカル・データ（パッケージ｜ピン）
サーマルパッド・メカニカル・データ
発注情報

1 Features

  • 2.7-V to 5.5-V Input Voltage
  • Integrated 40-V, 1.8-A MOSFET
  • Drives LED String up to 38 V
  • 1.2-A Minimum Switch Current Limit
  • 1.2-MHz Switching Frequency
  • 204-mV Reference Voltage
  • Internal Compensation
  • PWM Brightness Control
  • Open LED Protection
  • Undervoltage Protection
  • Built-in Soft-Start
  • Thermal Shutdown
  • Up to 90% Efficiency

2 Applications

  • Smartphone Backlighting
  • Tablet Backlighting
  • PDAs, Handheld Computers, GPS Receivers
  • Portable Media Players, Portable TVs
  • White LED Backlighting for Small and Media Form-Factor Displays
  • Handheld Data Terminals (EPOS)
  • Handheld Medical Equipment
  • Thermostat Display
  • Blood Glucose Meters
  • Flashlights
  • Refrigerators and Ovens

3 Description

With a 40-V rated integrated switch FET, the TPS61169 is a boost converter that drives LEDs in series. The boost converter has a 40-V, 1.8-A internal MOSFET with minimum 1.2-A current limit; thus it can drive single or parallel LED strings for small- to large-size panel backlighting. The default white LED current is set with the external sensor resistor, RSET, and the feedback voltage is regulated to 204 mV, as shown in the Simplified Schematic. During the operation, the LED current can be controlled by using a pulse width modulation (PWM) signal applied to the CTRL pin, through which the duty cycle determines the feedback reference voltage. The TPS61169 does not burst the LED current; therefore, it does not generate audible noises on the output capacitor. For maximum protection, the device features integrated open LED protection that disables the TPS61169 to prevent the output voltage from exceeding the absolute maximum voltage ratings of the device during open LED conditions.

The TPS61169 is available in a space-saving 5-pin SC70 package.

Device Information(1)

PART NUMBER PACKAGE BODY SIZE (NOM)
TPS61169 SOT (5) 2.00 mm × 1.25 mm
  1. For all available packages, see the orderable addendum at the end of the data sheet.

4 Simplified Schematic

TPS61169 simp_schematic_snvsa40.gif