SNVU737A December   2020  – December 2021 LM5123-Q1

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Applications
    2. 1.2 Features
  3. 2EVM Setup
    1. 2.1 EVM Characteristics
    2. 2.2 EVM Connectors and Test Points
    3. 2.3 EVM Configurations
      1. 2.3.1 Output Voltage Tracking
  4. 3Test Setup and Procedures
    1. 3.1 Equipment
  5. 4Test Results
    1. 4.1 Efficiency
    2. 4.2 Load Regulation
    3. 4.3 Thermal Performance
    4. 4.4 Start-up Waveforms
    5. 4.5 Steady State Operation
    6. 4.6 Load Transient Response
    7. 4.7 Output Voltage Tracking
  6. 5PCB Layers
  7. 6Schematic
  8. 7Bill of Materials
  9. 8Revision History

4.7 Output Voltage Tracking

Section 2.3.1 shows the output tracking using the TRK pin of the LM5123-Q1. To see more details on configuring the evaluation module to replicate these waveforms, see Section 2.3.1.

Figure 4-17 Triangle Voltage Tracking, VIN = 14-V, POUT = 200-W, VOUT 14-V to 33-V
Figure 4-18 Sine Voltage Tracking, VIN = 14-V, POUT = 200-W, VOUT 14-V to 33-V