TIDT281 June   2022

 

  1.   Description
  2.   Features
  3.   Applications
  4. 1Test Prerequisites
    1. 1.1 Voltage and Current Requirements
    2. 1.2 Considerations
    3. 1.3 Dimensions
  5. 2Testing and Results
    1. 2.1 Efficiency Graphs
      1. 2.1.1 24-V Output Voltage
      2. 2.1.2 48-V Output Voltage
    2. 2.2 Loss Graphs
      1. 2.2.1 24-V Output Voltage
      2. 2.2.2 48-V Output Voltage
    3. 2.3 Load Regulation
      1. 2.3.1 24-V Output Voltage
      2. 2.3.2 48-V Output Voltage
    4. 2.4 Line Regulation
      1. 2.4.1 24-V Output Voltage
      2. 2.4.2 48-V Output Voltage
    5. 2.5 Thermal Images
    6. 2.6 Bode Plots
      1. 2.6.1 60-V Input Voltage and 24-V Output Voltage
      2. 2.6.2 30-V Input Voltage and 48-V Output Voltage
      3. 2.6.3 Loop Variants
  6. 3Waveforms
    1. 3.1 Switching
      1. 3.1.1 24-V Output Voltage, 30-V Input Voltage (Duty Cycle 80%)
        1. 3.1.1.1 Diode D1
        2. 3.1.1.2 Transistor Q2
          1. 3.1.1.2.1 Drain - GND
          2. 3.1.1.2.2 Gate - GND
        3. 3.1.1.3 Diode D2
        4. 3.1.1.4 Transistor Q1
          1. 3.1.1.4.1 Source - VIN
          2. 3.1.1.4.2 Gate - Source
      2. 3.1.2 24-V Output Voltage; 60-V Input Voltage
        1. 3.1.2.1 Diode D2
        2. 3.1.2.2 Transistor Q1
          1. 3.1.2.2.1 Source - VIN
          2. 3.1.2.2.2 Gate-Source
      3. 3.1.3 48-V Output Voltage; 30-V Input Voltage (Maximum Stress)
        1. 3.1.3.1 Diode D1
        2. 3.1.3.2 Transistor Q2
          1. 3.1.3.2.1 Drain-GND
          2. 3.1.3.2.2 Gate-GND
        3. 3.1.3.3 Diode D2
        4. 3.1.3.4 Transistor Q1
          1. 3.1.3.4.1 Source - VIN
          2. 3.1.3.4.2 Gate - Source
      4. 3.1.4 48-V Output Voltage; 60-V Input Voltage
        1. 3.1.4.1 Diode D1
        2. 3.1.4.2 Transistor Q2
          1. 3.1.4.2.1 Drain - GND
          2. 3.1.4.2.2 Gate - GND
        3. 3.1.4.3 Diode D2
        4. 3.1.4.4 Transistor Q1
          1. 3.1.4.4.1 Source - VIN
          2. 3.1.4.4.2 Gate - Source
    2. 3.2 Output Voltage Ripple
      1. 3.2.1 24-V Output Voltage
      2. 3.2.2 48-V Output Voltage
    3. 3.3 Input Voltage Ripple
      1. 3.3.1 24-V Output Voltage
      2. 3.3.2 48-V Output Voltage
    4. 3.4 Load Transients
      1. 3.4.1 24-V Output Voltage
        1. 3.4.1.1 30-V Input Voltage
        2. 3.4.1.2 60-V Input Voltage
      2. 3.4.2 48-V Output Voltage
        1. 3.4.2.1 30-V Input Voltage
        2. 3.4.2.2 60-V Input Voltage
    5. 3.5 Start-Up Sequence
      1. 3.5.1 24-V Output Voltage
        1. 3.5.1.1 30-V Input Voltage
        2. 3.5.1.2 60-V Input Voltage
      2. 3.5.2 48-V Output Voltage
        1. 3.5.2.1 30-V Input Voltage
        2. 3.5.2.2 60-V Input Voltage
    6. 3.6 Shutdown Sequence
      1. 3.6.1 24-V Output Voltage
        1. 3.6.1.1 30-V Input Voltage
        2. 3.6.1.2 60-V Input Voltage
      2. 3.6.2 48-V Output Voltage
        1. 3.6.2.1 30-V Input Voltage
        2. 3.6.2.2 60-V Input Voltage

30-V Input Voltage

Note: This voltage combination is the worst case in boost mode due to Right Half-Plane Zero (RHPZ).
GUID-20220509-SS0I-BTCL-S2HS-PDRSPVBWNGGM-low.jpg

Ch1 ⇒ VOUT

1 V / div


                                

Ch2 ⇒ IOUT

200 mA / div


                                

2 ms / div

20-MHz bandwidth

Figure 3-32 Transient at 30 VIN and 48 VOUT