DLPU105 March   2021 DLP471TP , DLPC6540

PRODUCTION DATA  

  1.   Trademarks
  2. 1Safety Instructions
  3. 2Applicable Documents
  4. 3DLP LightCrafter Display 471TP EVM Components
  5. 4Light Engine
  6. 5Quick-Start Procedure
  7. 6Circuit Description
    1. 6.1 Connectors and Switches on Formatter Board
    2. 6.2 Connectors on Front-End Board
  8. 7EVM Setup
  9. 8Notifications

6.1 Connectors and Switches on Formatter Board

    J1 Connector for 19-V external power supply interface.
    J2 Connector for USB cable.
    J3 Connector for Vx1 flex cable from Front-End Board.
    J4 12-V power connector (used for EVM cooling fan).
    J5 12-V power connector (spare).
    J6 Connector for ASIC testpoints.
    J7 DMD Interface flex cable connector (HSSI0 Bus).
    J8 12-V power connector (used for ASIC cooling fan).
    J9 Header for BOOT_HOLD jumper
    J10 DMD Interface flex cable connector (HSSI1 Bus).
    J11 Connector for Blue LED cable.
    J12 Connector for IIC1 interface cable (spare).
    J13 Connector for Actuator Current Driver interface (not installed by default).
    J14 Header for Actuator Coil_A testpoint.
    J15 Header for Actuator Coil_B testpoint.
    J16 Connector for IIC0 interface cable (spare).
    J17 Connector for actuator flex cable.
    J18 Connector for Green LED cable.
    J19 Connector for Red LED cable.
    J20 Connector for ASIC JTAG cable.
    J21 Connector for WPC interface cable (spare).
    J22 Connector for SPI1 interface cable (spare).
    J23 Connector for UART0 interface cable (spare)
    SW1 Projector ON/OFF Switch.