DLPU109 May   2021

 

  1.   Trademarks
  2. 1DLPC7540EVM, DLP471TEEVM, and DLP650TEEVM Overview
    1. 1.1 Welcome
    2. 1.2 What is in the DLP471TEEVM, DLP650TEEVM, and DLPC7540EVM Evaluation Modules?
    3. 1.3 EVM Boards
    4. 1.4 Other Items Needed for Operation
    5. 1.5 DLPC7540EVM, DLP471TEEVM, and DLP650TEEVM EVM Flex Cable
  3. 2Quick Start
    1. 2.1 Downloading the Software
    2. 2.2 Connecting the DLP471TEEVM, or DLP650TEEVM, to the DLPC7540EVM
    3. 2.3 Powering-up the DLPC7540EVM and Preparing to Program the DLPC7540EVM
    4. 2.4 Programming the DLPC7540EVM and Displaying a SPLASH Image
    5. 2.5 Troubleshooting
  4. 3Connections
    1. 3.1 DLPC7540EVM Connections
    2. 3.2 DLP471TEEVM and DLP650TEEVM Connections
      1. 3.2.1 Test Points
      2. 3.2.2 Connectors
  5. 4Power Supply Requirements
    1. 4.1 External Power Supply Requirements
  6. 5Safety
    1. 5.1 Caution Labels
    2. 5.2 If You Need Assistance
  7. 6Related Documentation

1.5 DLPC7540EVM, DLP471TEEVM, and DLP650TEEVM EVM Flex Cable

Electrical malfunctions can occur by stressing the flex cable(s) connecting the DMD circuit board to the DLPC7540EVM formatter board. Stressing the flex cable can be caused by:

  • Bending sharply the flex cable(s).
  • Repeatedly bending the flex cable(s).
  • Excessive insertion and extraction of flex cables to/from board connectors.

Note:

Minimize any handling/movement on the flex cables during operation