SBVU067A April   2020  – June 2021 TPS62840

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Performance Specification
    2. 1.2 Modifications
      1. 1.2.1 Adjusting the Output Voltage
      2. 1.2.2 Input and Output Capacitors
      3. 1.2.3 Loop Response Measurement
  3. 2Setup
    1. 2.1 Input/Output Connector Descriptions
    2. 2.2 Setup
  4. 3TPS62841-2EVM123 Test Results
  5. 4Board Layout
  6. 5Schematic and Bill of Materials (BOM)
    1. 5.1 Schematic
    2. 5.2 Bill of Materials
  7. 6Revision History

Board Layout

Figure 4-1 through Figure 4-5 provide the TPS62841-2EVM123 board layout and illustrations. The Gerbers are available on the EVM product page: TPS62841-2EVM123.

GUID-8D2C8FBB-1F30-4CD9-8E8B-7E4833835CC2-low.pngFigure 4-1 Top Assembly
GUID-DAE24E00-A6A3-4CC8-BF6A-2342B4236910-low.pngFigure 4-2 Top Layer
GUID-C8D93B3B-CC33-4532-8807-9EB06AFEEA19-low.pngFigure 4-3 Internal Layer 1
GUID-1F5E1BE8-A839-493A-8005-C66F183E9566-low.pngFigure 4-4 Internal Layer 2
GUID-B8E024F7-69CA-487F-9658-977FA77ADE68-low.pngFigure 4-5 Bottom Layer