SFFSAD4 Functional safety information

SFFSAD4 May 2025 TLV3511-Q1

2.1 SOT-23 (5) Package

This section provides functional safety failure in time (FIT) rates for the SOT-23 (5) package of the TLV3511-Q1 based on two different industry-wide used reliability standards:

Table 2-5 provides FIT rates based on IEC TR 62380 / ISO 26262 part 11
Table 2-6 provides FIT rates based on the Siemens Norm SN 29500-2

Table 2-1 Component Failure Rates per IEC TR 62380 / ISO 26262 Part 11

FIT IEC TR 62380 / ISO 26262	FIT (Failures Per 10⁹ Hours)
Total component FIT rate	4
Die FIT rate	2
Package FIT rate	2

The failure rate and mission profile information in Table 2-5 comes from the reliability data handbook IEC TR 62380 / ISO 26262 part 11:

Mission profile: motor control from table 11 or figure 16
Power dissipation: 10mW
Climate type: world-wide table 8 or figure 13
Package factor (lambda 3): table 17b or figure 15
Substrate material: FR4
EOS FIT rate assumed: 0 FIT

Table 2-2 Component Failure Rates per Siemens Norm SN 29500-2

Table	Category	Reference FIT Rate	Reference Virtual T_J
4	Bipolar Op Amp, Comparators, Voltage Monitors	12 FIT	55 °C

The reference FIT rate and reference virtual T_J (junction temperature) in Table 2-6 come from the Siemens Norm SN 29500-2 tables 1 through 5. Failure rates under operating conditions are calculated from the reference failure rate and virtual junction temperature using conversion information in SN 29500-2 section 4.