SLAU858B December   2023  – June 2025 AFE881H1

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
  6. 2Hardware
    1. 2.1 Hardware Description
      1. 2.1.1 Theory of Operation
      2. 2.1.2 Signal Definitions
    2. 2.2 Hardware Setup
      1. 2.2.1 Electrostatic Discharge Caution
      2. 2.2.2 Power Configuration and Jumper Settings
      3. 2.2.3 Connecting the Hardware
        1. 2.2.3.1 Power Configuration
        2. 2.2.3.2 External SPI and UART Controllers
  7. 3Software
    1. 3.1 Software Setup
    2. 3.2 Software Description
      1. 3.2.1 Starting the Software
      2. 3.2.2 Software Features
        1. 3.2.2.1 High Level Configuration Page
        2. 3.2.2.2 AFE881H1 Register Page
  8. 4Hardware Design Files
    1. 4.1 Board Schematic
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  9. 5Additional Information
    1. 5.1 Trademarks
  10. 6Related Documentation
  11. 7Revision History

2.2.3 Connecting the Hardware

After the power and jumper configurations are set up per Section 2.2.2, connect the USB cable from the AFE881H1EVM USB port to the local machine. Figure 2-3 displays the system hardware setup.

AFE881H1EVM AFE881H1EVM Hardware Setup Figure 2-3 AFE881H1EVM Hardware Setup