SLAU858B December   2023  – June 2025 AFE881H1

 

  1.   1
  2.   Description
  3.   Features
  4.   4
  5. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
  6. 2Hardware
    1. 2.1 Hardware Description
      1. 2.1.1 Theory of Operation
      2. 2.1.2 Signal Definitions
    2. 2.2 Hardware Setup
      1. 2.2.1 Electrostatic Discharge Caution
      2. 2.2.2 Power Configuration and Jumper Settings
      3. 2.2.3 Connecting the Hardware
        1. 2.2.3.1 Power Configuration
        2. 2.2.3.2 External SPI and UART Controllers
  7. 3Software
    1. 3.1 Software Setup
    2. 3.2 Software Description
      1. 3.2.1 Starting the Software
      2. 3.2.2 Software Features
        1. 3.2.2.1 High Level Configuration Page
        2. 3.2.2.2 AFE881H1 Register Page
  8. 4Hardware Design Files
    1. 4.1 Board Schematic
    2. 4.2 PCB Layout
    3. 4.3 Bill of Materials
  9. 5Additional Information
    1. 5.1 Trademarks
  10. 6Related Documentation
  11. 7Revision History

4.2 PCB Layout

Figure 4-3 through Figure 4-6 show the board layout for the AFE881H1EVM.

AFE881H1EVM AFE881H1EVM PCB Top Layer Layout Figure 4-3 AFE881H1EVM PCB Top Layer Layout
AFE881H1EVM AFE881H1EVM PCB Mid Layer 1 Layout (GND Plane) Figure 4-4 AFE881H1EVM PCB Mid Layer 1 Layout (GND Plane)
AFE881H1EVM AFE881H1EVM PCB Mid Layer 2 Layout (GND Pour with Signal Routing) Figure 4-5 AFE881H1EVM PCB Mid Layer 2 Layout (GND Pour with Signal Routing)
AFE881H1EVM AFE881H1EVM PCB Bottom Layer Layout Figure 4-6 AFE881H1EVM PCB Bottom Layer Layout