SLAU957 June   2025 TRF1108 , TRF1208

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  8. 2Hardware
    1. 2.1 Power Requirements
    2. 2.2 Setup
    3. 2.3 Interfaces
  9. 3Software
    1. 3.1 Software Installation
    2. 3.2 Software Description
      1. 3.2.1 HSDC Pro Overview
      2. 3.2.2 Latte Overview
        1. 3.2.2.1 Latte Shortcuts
  10. 4Implementation Results
    1. 4.1 Evaluation Setup TRF-LSC-AFE7950EVM Automatic Configuration
      1. 4.1.1 Recommended Test Environment
      2. 4.1.2 Required Hardware
      3. 4.1.3 Steps to Start Automatic Configuration
      4. 4.1.4 TXDAC Evaluation
      5. 4.1.5 RXADC and FBADC Evaluation
      6. 4.1.6 TRF-LSC-AFE7950EVM Manual Configuration
        1. 4.1.6.1 TSW14J5x DAC Pattern Setup
        2. 4.1.6.2 Connect Latte to Board
        3. 4.1.6.3 Compile Libraries
        4. 4.1.6.4 Program TRF-LSC-AFE7950EVM
        5. 4.1.6.5 Modify Configuration
      7. 4.1.7 Setup the TSW14J5x With the HSDC PRO
        1. 4.1.7.1 DAC Pattern Setup and Send
        2. 4.1.7.2 DAC Synchronization Check
        3. 4.1.7.3 ADC Data Capture
        4. 4.1.7.4 ADC Synchronization Check
    2. 4.2 Status Check and Troubleshooting Guidelines
      1. 4.2.1 EVM Status Indicators
      2. 4.2.2 TSW14J56 EVM
    3. 4.3 Performance Data and Results
  11. 5Hardware Design Files
    1. 5.1 Schematics
    2. 5.2 PCB Layouts
    3. 5.3 Bill of Materials (BOM)
  12. 6Additional Information
    1. 6.1 Trademarks

3.1 Software Installation

  1. Install the HSDC PRO software. Follow all the instructions within the installer execution process.
    • The default HSDC PRO software path is:
      C:\Program Files (x86)\Texas Instruments\High Speed Data Converter Pro
  2. Install AFE79xxEVM_GUIvxxxxx.exe. Follow all the instructions within the installer execution process shown in Figure 3-1. The following applications are installed:
    • Latte 5.x.x
    • AFE79xx Latte Library Vx.xx
      • Both the base Latte software and the AFE79xx Latte library update as needed throughout the product development process.
    • National Instruments LabVIEW™ Runtime Engine 2014
    • Associated HSDC PRO .ini files required for the TRF-LSC-AFE7950EVM.
    TRF-LSC-AFE7950EVM Latte Installer Options Figure 3-1 Latte Installer Options
  3. The default Latte software directory installs at C:\Users\User ID\Documents\Texas Instruments\Latte. Replace User ID with the proper Windows® log-in ID.