SLVUAF6A June   2015  – May 2021 TPS62745

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Background
  3. 2Setup
    1. 2.1 Input/Output Connector Descriptions
    2. 2.2 Operation
  4. 3Common Efficiency Measurement Errors with Ultra-Low Iq Devices
    1. 3.1 Efficiency Measurement Setup
    2. 3.2 Pullup and Pulldown Resistors
  5. 4Board Layout
  6. 5Schematic and Bill of Materials
    1. 5.1 Schematic
    2. 5.2 Bill of Materials
  7. 6Revision History

2.2 Operation

To operate the EVM, set jumpers JP1 through JP6 to the desired positions per Section 2.1. Connect the input supply to J1 and J3 and connect the load to J4 and J6.