SLVUC27 January   2021 TPS61094

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Performance Specification
    2. 1.2 Modification
  3. 2Connector, Test Point and Jumper Descriptions
    1. 2.1 Connector and Test Point Descriptions
    2. 2.2 Jumper Configuration
      1. 2.2.1 Boost Converter with Bypass
      2. 2.2.2 Boost Converter with Automatic Buck or Boost Function
  4. 3Schematic, Bill of Materials, and Board Layout
    1. 3.1 Schematics
    2. 3.2 Bill of Materials
    3. 3.3 PCB Layouts

2.1 Connector and Test Point Descriptions

This EVM includes I/O connectors and test points as shown in Table 2-1.
Table 2-1 Connectors and test Points
Reference Designator Description
J1 Input voltage positive connection
J2 Input voltage positive and negative sense connection
J3 Vout positive connection
J4 Output voltage positive and negative sense connection
J5, J6, J9, J10 GND connection
J7 SUP port positive connection
J8 Sup port positive and negative sense connection