SLVUCA9 August   2021 TPS25869-Q1

 

  1.   Trademarks
  2. 1Introduction
    1. 1.1 Features
    2. 1.2 Applications
  3. 2Schematic
  4. 3General Configuration and Description
    1. 3.1 Physical Access
    2. 3.2 Adjusting the Switching Frequency
    3. 3.3 Adjusting the Current Limit Value
    4. 3.4 Adjusting the Cable Compensation Value
    5. 3.5 Thermal Management
    6. 3.6 Test Setup
  5. 4Board Layout
  6. 5Bill of Materials

Board Layout

Figure 4-1 and Figure 4-2 show the top and bottom assembly. Figure 4-3 and Figure 4-4 show the top side and bottom side 3D view. Figure 4-5 through Figure 4-8 show the layout images of the EVM.

GUID-AD6F36C9-96D0-4898-B2C5-910E5791C007-low.png Figure 4-1 Top Side Assembly
GUID-5D712781-EDC8-498A-9F9B-DA3C6286B11B-low.png Figure 4-2 Bottom Side Assembly

GUID-0058DAF0-5B05-44B5-B7FB-DC8CA73D4555-low.png Figure 4-3 Top Side 3D View
GUID-7FACB135-5409-4034-8A90-83B411674EB2-low.png Figure 4-4 Bottom Side 3D View

GUID-B338A61E-AA2C-4580-9378-EC0CB54A4C8F-low.png Figure 4-5 Top Layer Layout
GUID-33A02AAA-D91F-473E-9EE7-DDF0144329CD-low.png Figure 4-6 Mid-1 Layer Layout

GUID-2B12040A-78EF-421D-8D66-D872A4DEF2C2-low.png Figure 4-7 Mid-2 Layer Layout
GUID-03EC3E43-5B77-435D-A4AD-060C86684AE2-low.png Figure 4-8 Bottom Layer Layout