SNAA430 January   2025 LMX1205

 

  1.   1
  2.   Abstract
  3.   Trademarks
  4. 1Introduction
  5. 2Where Does the Sync Signal Rise Come With Respect to the Clock Rise Edge?
  6. 3What is this Request Mode?
  7. 4Pulse Mode
  8. 5Repeater Non-sync Mode
  9. 6Repeater Sync Mode
  10. 7Summary
  11. 8References
  12. 9Appendix A

5 Repeater Non-sync Mode

  1. SYSREF_MODE is made 2.
  2. Figure 5-1 shows the repeated non-synced output on Secondary1 sysrefout2_p(red) and Secondary2 sysrefout2_p(green) from Primary sysrefout2_p(yellow).
  3. Windowing is not necessary for repeater mode.
  4. Zoomed version of rising edges of Primary, Secondary1 and secondary2 are shown in Figure 5-2.
Waveforms for Secondary1, and Secondary2 in Repeater Non-sync Mode With Primary in Continuous ModeFigure 5-1 Waveforms for Secondary1, and Secondary2 in Repeater Non-sync Mode With Primary in Continuous Mode
Waveforms for Secondary1, and Secondary2 in Repeater Non-sync Mode with Primary in Continuous Mode (Zoomed in)Figure 5-2 Waveforms for Secondary1, and Secondary2 in Repeater Non-sync Mode with Primary in Continuous Mode (Zoomed in)