SNVU932A March   2025  – August 2025 LP5814 , LP5814I , LP5815

 

  1.   1
  2.   Description
  3.   Get Started
  4.   Features
  5.   Applications
  6.   6
  7. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Device Information
  8. 2Hardware
    1. 2.1 Setup
    2. 2.2 Jumper Information
  9. 3Software
    1. 3.1 Software Description
    2. 3.2 Graphical User Interface (GUI) Installation
    3. 3.3 Graphical User Interface (GUI) Guidance
      1. 3.3.1 Hardware Connection
      2. 3.3.2 Start Page
      3. 3.3.3 Hardware Setup Page
      4. 3.3.4 Home Page
      5. 3.3.5 LED Control Page
        1. 3.3.5.1 Turn ON LED in Manual Mode
        2. 3.3.5.2 Turn On LED in Autonomous Mode
      6. 3.3.6 Enter and Exit Shutdown Mode
      7. 3.3.7 Read Flags
  10. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  11. 5Additional Information
    1. 5.1 Trademarks
  12. 6Revision History

4.3 Bill of Materials (BOM)

Table 4-1 shows the bill of materials (BOM) of LP5814DRLEVM and LP5814YCHEVM.

Table 4-1 LP5814DRLEVM and LP5814YCHEVM BOM
DESIGNATOR QUANTITY DESCRIPTION MANUFACTURER PART NUMBER
C1 1 CAP, CERM, 1µF, 10V, +/- 10%, X7R, 0603

Taiyo Yuden

 LMK107B7105KA-T
D1 1 LED, RGB, SMD Cree CLY6D-FKC-CK1N1D1BB7D3D3
D2 1 LED, Cool White, SMD Cree CLM3C-WKW-CWBYA453
J1, J2 2 Header, 100mil, 2x1, Gold, TH Samtec HTSW-102-07-G-S
J3, J4, J5, J6, J7, J8, J9, J10 8 Header, 2.54mm, 1x1, Gold, TH Samtec TSW-101-08-G-S
R1, R2 2 RES, 4.7k, 5%, 0.1W, 0603 Vishay-Dale CRCW06034K70JNEA
SH-J1, SH-J2 2 Shunt, 100mil, Gold plated, Black Samtec SNT-100-BK-G
GND 1 Test Point, Multipurpose, Black, TH Keystone 5011
VCC 1 Test Point, Multipurpose, Red, TH Keystone 5010
VLED 1 Test Point, Multipurpose, Yellow, TH Keystone 5014
USB1 1 Header(shrouded), 2.54mm, 15x2, Gold with Tin tail, R/A, TH Sullins Connector Solutions SBH11-PBPC-D05-RA-BK
U1 1 4-Channel I2C Interface RGBW LED Driver with Auto Animation Control Texas Instruments LP5814DRL/YCHR

Table 4-2 shows the bill of materials (BOM) of LP5815DRLEVM and LP5815YCHEVM.

Table 4-2 LP5815DRLEVM and LP5815YCHEVM BOM
DESIGNATOR QUANTITY DESCRIPTION MANUFACTURER PART NUMBER
C1 1 CAP, CERM, 1µF, 10V, +/- 10%, X7R, 0603

Taiyo Yuden

 LMK107B7105KA-T
D1 1 LED, RGB, SMD Cree CLY6D-FKC-CK1N1D1BB7D3D3
J2, J3, J9 3 Header, 100mil, 2x1, Gold, TH Samtec HTSW-102-07-G-S
J4, J5, J6, J7, J8, J10, J11 7 Header, 2.54mm, 1x1, Gold, TH Samtec TSW-101-08-G-S
R1, R2, R3 3 RES, 4.7k, 5%, 0.1W, 0603 Vishay-Dale CRCW06034K70JNEA
SH-J1, SH-J2, SH-J3 3 Shunt, 100mil, Gold plated, Black Samtec SNT-100-BK-G
GND 1 Test Point, Multipurpose, Black, TH Keystone 5011
VCC 1 Test Point, Multipurpose, Red, TH Keystone 5010
VLED 1 Test Point, Multipurpose, Yellow, TH Keystone 5014
USB1 1 Header(shrouded), 2.54mm, 15x2, Gold with Tin tail, R/A, TH Sullins Connector Solutions SBH11-PBPC-D05-RA-BK
U1 1 3-Channel I2C Interface RGB LED Driver with Instant Blinking and Auto Animation Control Texas Instruments LP5815DRL/YCHR