SNVU943 April   2025 TPSM33620-Q1

 

  1.   1
  2.   Description
  3.   Features
  4.   Applications
  5.   5
  6. 1Evaluation Module Overview
    1. 1.1 Introduction
    2. 1.2 Kit Contents
    3. 1.3 Specification
    4. 1.4 Device Information
  7. 2Hardware
    1. 2.1 Setup
    2. 2.2 Jumper Information
    3. 2.3 Test Points
  8. 3Implementation Results
    1. 3.1 Evaluation Setup
    2. 3.2 Performance Data and Results
  9. 4Hardware Design Files
    1. 4.1 Schematics
    2. 4.2 PCB Layouts
    3. 4.3 Bill of Materials (BOM)
  10. 5Additional Information
    1. 5.1 Trademarks

2.3 Test Points

See Figure 2-1 for typical test setup. The functions of the test point connections are:

  • VINEMI (TP1) - input supply connection to the EVM
  • GND (TP2) - ground connection for the input supply
  • VOUT (TP3) - output connection for the load
  • GND (TP4) - ground connection for the load
  • EN (TP5) - enable signal test point
  • PGOOD (TP6) - Pgood signal test point
  • SYNC (TP7) - sync signal input connection to the EVM (for use with an external clock)
  • GND (TP8) - ground connection for the sync signal
  • VOUT (TP9) - sense connection point for the output voltage
  • GND (TP10) - extra ground connection test point