SLVSC26A November   2013  – June 2015 TPS61162A , TPS61163A

PRODUCTION DATA.  

  1. 1 Features
  2. 2 Applications
  3. 3 Description
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 EasyScale Timing Requirements
    7. 6.7 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1  Boost Converter
      2. 7.3.2  IFBx Pin Unused
      3. 7.3.3  Enable and Start-up
      4. 7.3.4  Soft Start
      5. 7.3.5  Full-Scale Current Program
      6. 7.3.6  Brightness Control
      7. 7.3.7  Undervoltage Lockout
      8. 7.3.8  Overvoltage Protection
      9. 7.3.9  Overcurrent Protection
      10. 7.3.10 Thermal Shutdown
    4. 7.4 Device Functional Modes
      1. 7.4.1 One-Wire Digital Interface (EasyScale Interface)
      2. 7.4.2 PWM Control Interface
    5. 7.5 Programming
      1. 7.5.1 EasyScale Programming
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Inductor Selection
        2. 8.2.2.2 Schottky Diode Selection
        3. 8.2.2.3 Compensation Capacitor Selection
        4. 8.2.2.4 Output Capacitor Selection
      3. 8.2.3 Application Curves
      4. 8.2.4 Additional Application Circuits
  9. 9 Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Device Support
      1. 11.1.1 Third-Party Products Disclaimer
    2. 11.2 Related Links
    3. 11.3 Community Resources
    4. 11.4 Trademarks
    5. 11.5 Electrostatic Discharge Caution
    6. 11.6 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

Package Options

Mechanical Data (Package|Pins)
Thermal pad, mechanical data (Package|Pins)
Orderable Information

1 Features

  • 2.7-V to 6.5-V Input Voltage
  • Integrated 1.5-A/40-V MOSFET
  • 1.2-MHz Switching Frequency
  • Dual Current Sinks of up to 30-mA Current Each
  • 1% Typical Current Matching and Accuracy
  • Optional 26.5-V / 37.5-V OVP Threshold
    • TPS61162A: 26.5-V OVP
    • TPS61163A: 37.5-V OVP
  • Adaptive Boost Output to WLED Voltages
  • Very Low Voltage Headroom Control (90 mV)
  • Flexible Digital and PWM Brightness Control
  • One-Wire Control Interface (EasyScale™)
  • PWM Dimming Control Interface
  • Up to 100:1 PWM Dimming Ratio
  • Up to 9-Bit Dimming Resolution
  • Up to 90% Efficiency
  • Built-in Soft Start
  • PFM Mode at Light Load
  • Overvoltage Protection
  • Built-in WLED Open/Short Protection
  • Thermal Shutdown
  • Supports 4.7-µH Inductor Application

2 Applications

  • Smart Phones
  • PDAs, Handheld Computers
  • GPS Receivers
  • Backlight for Small and Media Form-Factor LCD Display with Single-Cell Battery Input

3 Description

The TPS61162A and TPS61163A are dual-channel WLED drivers which provide highly integrated solutions for single-cell Li-ion battery powered smart phone backlight. The devices have a built-in high efficiency boost regulator with integrated 1.5-A, 40-V power MOSFET and support as low as 2.7-V input voltage. With two high current-matching capability current sink regulators, the devices can drive up to 10s2p WLED diodes. The boost output can automatically adjust to the WLED forward voltage and allow very low voltage headroom control, thus to improve LED strings efficiency effectively.

The TPS61162A and TPS61163A support both the PWM dimming interface and one-wire digital EasyScale™ dimming interface and can realize 9-bit brightness code programming.

The TPS61162A and TPS61163A integrate built-in soft start, as well as overvoltage, overcurrent, and thermal shutdown protections.

Device Information(1)

PART NUMBER PACKAGE OPEN LED PROTECTION
TPS61162A DSBGA (9) TPS61162A use 26.5 V (typical)
TPS61163A TPS61162A use 37.5 V (typical)
  1. For all available packages, see the orderable addendum at the end of the data sheet.

Simplified Schematic

TPS61162A TPS61163A fp_typ_app_lvsc26.gif

4 Revision History

Changes from * Revision (November 2013) to A Revision

  • Added Pin Configuration and Functions section, ESD Rating table, Feature Description , Device Functional Modes, Application and Implementation, Power Supply Recommendations, Layout, Device and Documentation Support , and Mechanical, Packaging, and Orderable Information sections; Go
  • Deleted Ordering InformationGo