TEXAS INSTRUMENTS EMEA SALES GMBH (“TI”) TERMS OF SALE
1. Applicability, Offer and Acceptance.
Orders for Items placed through TI.com shall be subject to additional terms set forth below in Appendix A: Supplemental Terms for TI.com Transactions.
Items are for commercial use only and not intended for personal or consumer use.
TI’s offers are non-binding. Buyer may offer to buy Items, and in the case of Evaluation Items, may offer to buy and/or take delivery, under these Terms of Sale by submitting an order to TI. TI may accept or reject any order at TI’s sole discretion.
Where Buyer submits its order through TI.com, TI’s order confirmation is for informational purposes only and does not constitute TI’s acceptance of Buyer’s order or confirmation of an offer to sell and/or deliver an Item. Acceptance takes place only when TI either (i) sends a confirmation that the Item has shipped or (ii) sends an express confirmation of acceptance. Such acceptance only relates to those Items whose shipment have been confirmed or that TI has identified in an express confirmation of acceptance.
These Terms of Sale are the sole terms governing TI’s sale or provision of Items to Buyer. TI’s acceptance of Buyer’s offer is expressly limited to these Terms of Sale. TI hereby objects to and rejects any additional or different terms proposed by Buyer, including those contained in Buyer’s purchase order, unless TI expressly agrees to such terms in writing. Such terms will not apply even if TI performs any purchase order in the knowledge of such conflicting terms without expressly rejecting them.
Capitalized words will have the meaning described in the Glossary of Defined Terms located at the end of Section 20 below. These Terms of Sale shall also apply to any future order of Buyer.
TI may, at any time prior to accepting Buyer’s offer, decline, reject, cancel, or limit Buyer’s order for any reason, including, without limitation: if an Item is not available; if TI determines an Item has an issue requiring repair; in the event of errors in item or pricing information; or if TI (or its authorized business partners) identify issues relating to credit and fraud avoidance. Should this occur, Buyer will be informed and any Payments Buyer has made with respect to such Items, if any, will be refunded to Buyer.
Where applicable, TI communicates pricing to customers in various ways (e.g., quotes) and confirms transaction prices with its order acknowledgements. Prior to shipment, TI’s price may reasonably change due to adjustments in specifications, quantities, shipment arrangements, requested delivery dates, or other changes to conditions which TI is not responsible for and which were not foreseeable with reasonable certainty (including, without limitation, not merely insignificant cost changes due to wage agreements, changes of the tax burden, price changes of raw materials and other production materials, price changes by sub-suppliers or currency fluctuations). The final price in effect on the date of shipment as stated in TI’s invoice applies. Unless otherwise agreed, prices are in U.S. Dollars and Payment must be in U.S. Dollars.
For purchases made on TI.com, see Appendix A for additional terms.
3. Delivery and Retention of Title.
3.1 Unless TI notifies Buyer otherwise, shipments will be delivered FCA (Incoterms 2010) TI’s point of shipment. Risk of loss or damage will pass to Buyer upon TI’s delivery to the TI designated shipping point. Any subsequent loss or damage will not relieve Buyer from its obligations.
Buyer is solely responsible for costs of freight and insurance after delivery to the TI designated shipping point. If TI incurs freight or insurance costs on Buyer’s behalf, Buyer must promptly reimburse TI for such freight or insurance costs.
Unless TI notifies Buyer otherwise, Buyer is importer of record and is responsible for all import duties, taxes and any other expenses incurred or licenses or clearances required. TI may deliver Items in installments provided that the partial delivery is reasonably acceptable for Buyer, in particular if the delivery of the remaining goods ordered is ensured and no significant additional costs or expenditure arise for Buyer as a result thereof.
Where applicable, TI will communicate to Buyer an Estimated Ship Date. The Estimated Ship Date is non-binding unless TI has confirmed it in writing as being binding. TI will not be liable for any damage, loss or expense incurred by Buyer if TI fails to meet the non-binding Estimated Ship Date.
3.2 All Items shipped to Buyer will remain TI’s property (“Items with Title Reserved”) until all claims by TI relating to business transacted with Buyer and outstanding at the time of delivery have been settled in full. Buyer will be entitled to resell Items with Title Reserved in the normal course of its business, provided it does not default on its Payment to TI. Buyer is not entitled to pledge or transfer as security title to any Items with Title Reserved.
Buyer hereby assigns to TI all claims arising in relation to Items with Title Reserved either from resale thereof or on any other legal grounds (e.g. tort), in an amount equal to their invoiced value. This will also apply to the balance of any agreed current account. TI authorizes Buyer to collect in Buyer’s name but on TI’s account claims thus assigned to TI. TI will be entitled to revoke such authorization to collect and require that Buyer discloses all such claims if Buyer is in delay with any Payment due to TI, if judgment enforcement proceedings are brought against Buyer, if Buyer’s assets deteriorate substantially or in case of insolvency proceedings.
If a third party attempts to seize Items with Title Reserved, Buyer will inform the third party that such Items with Title Reserved are the property of TI and will immediately notify TI. If Buyer fails to notify TI, TI will be entitled to claim all amounts outstanding immediately. To the extent that delivery has not taken place, TI will have the option to deliver immediately or to withhold delivery until Payment is tendered.
Any processing or reworking of Items with Title Reserved will be undertaken by Buyer on TI’s behalf. TI will acquire title to the results of such processing or reworking in the amount of the market value of the Items with Title Reserved at the time they are processed or reworked.
If Items with Title Reserved are commingled or combined with other goods, TI acquires pro rata joint ownership of the new product proportional to the value of the Items with Title Reserved as compared to that of the other goods at the time of commingling or combining. If another good is deemed the major item in the processing, it is hereby agreed that Buyer will, to the extent that it owns the new product, grant TI joint ownership in the new product proportional to the value of the Items with Title Reserved as compared to the value of the new product.
In case Buyer is in breach of any purchase order, in particular default in Payment, TI is entitled to recover the Items with Title Reserved without the need to set a grace period. Buyer is obligated to return the Items with Title Reserved. In order to recover the Items with Title Reserved, TI may enter Buyer’s premises where these are stored, and subsequently store them or have them stored for TI.
The recovery of Items with Title Reserved does not require that TI rescinds the contract; a rescission requires TI’s express statement to that effect.
3.3 For purchases made on TI.com, see Appendix A for additional terms.
4. Cancellations and Rescheduling.
For Products, Wafer Products and Die Products Buyer may cancel or reschedule orders according to the following rules:
Buyer-Requested Cancel or |
|Standard Products||Non-Standard Products|
|<30 Days before ESD||Not allowed||Not allowed|
|30-90 Days before ESD||Allowed||Not allowed|
|>90 Days before ESD||Allowed||Requires TI approval. Charges|
For Evaluation Items: Orders for Evaluation Items may not be cancelled or rescheduled by Buyer.
Notwithstanding the above rules, certain Items are subject to special cancellation and reschedule terms that TI will communicate to Buyer prior to order acceptance. Cancellation rights under applicable statutory law shall remain unaffected.
5. Payment Terms.
Where applicable, Payment is due thirty (30) Days after TI’s invoice date. TI may change or withdraw credit amounts or payment terms at any time in case, at TI´s reasonable judgment, Buyer´s financial condition or previous payment record so warrants. If Buyer fails to make Payment when due, TI may suspend performance under any agreements, including delay of shipment on any open orders, and may cancel any such order after the unsuccessful lapse of a reasonable grace period, unless such period is dispensable. TI will not be liable for, and Buyer will hold TI harmless from, any costs or losses resulting from suspension or cancellation on account of Buyer’s failure to make Payment. Buyer may not deduct any Payment amounts on account of unresolved disputes. TI may charge Buyer interest of nine percentage points above the then current basic interest rate of the European Central Bank in the overdue amount.
For purchases made on TI.com, see Appendix A for additional terms.
Prices do not include applicable taxes or duties. Buyer is solely responsible for paying all applicable taxes and duties. TI will add sales taxes to the sales price where required by applicable law and Buyer will pay such taxes unless Buyer provides TI with a duly executed sales tax exemption certificate. If Buyer is required by law to withhold any amount of tax from its Payment to TI, Buyer will take all reasonable steps to minimize such withholding tax, provide TI with a receipt or certificate as evidence the tax has been paid, and reimburse TI for the amount of withholding so that TI receives Payment for the full value of the invoice.
Subject to Section 3.2, unless TI notifies Buyer otherwise, with regard to international shipments that transit through international waters or airspace, title transfers to Buyer immediately after the Items leave the jurisdictional territory of TI’s point of shipment, and with regard to domestic shipments and international shipments that do not transit through international waters or airspace, title transfers upon delivery to Buyer’s carrier or nominee at TI’s point of shipment.
TI will not be in breach of this contract and will not be liable for any non-performance or delay in performance if such non-performance or delay is due to a force majeure event or other circumstances beyond TI’s reasonable control, whether foreseeable or unforeseeable, including but not limited to, shortages of labor, energy, fuel, machinery or materials, technical or yield failures, war, civil unrest, epidemic, pandemic, any government act, law or regulation, including any judicial order or decree, any communication or power failure, labor dispute, natural disaster, fire, flood, earthquake, explosion, terrorist act, or Act of God. In the event of a shortage of components, TI may, at its sole discretion, allocate Item production and deliveries.
8. Warranties and Related Remedies.
8.1 Subject to Sections 8.2 through 8.5, 9 and 11 below, TI warrants to Buyer that, at the time of delivery, each (i) Product conforms to TI’s published Specifications for such Product subject to a limitation period for claims for defects of twelve (12) months after the date TI or a TI-authorized distributor delivers such Product, (ii) Wafer Product and Die Product conforms to TI’s published Specifications for such products subject to a limitation period for claims for defects of thirty (30) Days after the date TI or a TI-authorized distributor delivers such products and (iii) Evaluation Kit will be free of defects in material and workmanship subject to a limitation period for claims for defects of ninety (90) Days after the date TI or a TI-authorized distributor delivers such product.
Notwithstanding the foregoing, TI will not be liable for a nonconforming Item if:
(a) the nonconformity was caused by neglect, misuse, or mistreatment by an entity other than TI, including improper storage, installation or testing, usage of Evaluation Items outside of the instructions set forth in the User Guide or for any Items that were altered or modified in any way by an entity other than TI, after the time of the transfer of risk from TI to Buyer;
(b) the nonconformity resulted from Buyer’s design, specifications, or instructions for such Items or improper system design; or
(c) where applicable, Buyer has not paid on time.
Testing and other quality control techniques may be used only to the extent TI deems necessary. Buyer is aware that TI does not necessarily test all parameters of each Item.
Buyer’s claims against TI under this Section 8 are excluded if Buyer fails to notify TI of any apparent defects in the Item within ten (10) business days after delivery, or of any hidden defects within ten (10) business days after the defect has been detected.
8.2 TI will, at its option and expense, repair the defect or supply a replacement Item (“Subsequent Performance”). Instead of Subsequent Performance TI may offer Buyer to take back the defective Item concerned and credit the purchase price to Buyer’s account. Subsequent Performance will be effected without recognition of a legal obligation. If Subsequent Performance fails finally, Buyer will be entitled to rescind the respective purchase order; the right to claim a price reduction will be excluded. Further claims for defects of any kind whatsoever are excluded, without prejudice to any restricted claims for damages subject to Section 11.
8.3 The place of fulfillment for TI’s Subsequent Performance will be TI’s place of business. Claims of Buyer for costs required for the purpose of Subsequent Performance, notably the costs of transport, journeys, labor and material, are excluded to the extent that the costs are increased as a result of the Item being brought to a place other than the agreed place of delivery. Also excluded are costs for dismounting and installing the defective Item. TI may charge such increased costs to Buyer. Buyer may only claim such costs as damages subject to Section 11.
8.4 TI may provide Buyer technical, applications, or design advice (including reference designs), quality characterization, reliability data, or other services. Buyer agrees that providing these services does not expand or otherwise alter TI’s warranties as set forth above and no additional obligations or liabilities arise from TI providing such services or items.
8.5 The limitation period set forth in Section 8.1 above will not apply in the following cases: (i) liability under the German Product Liability Act (Produkthaftungsgesetz), (ii) defects for which a guarantee for the quality of the Item was provided (in this case, the provisions including the limitation period, if any, as set out in the guarantee will apply), (iii) fraudulently concealed defects, (iv) injury of life and limb, (v) intent and (vi) gross negligence of an officer or executive of TI. For repaired Items the remainder of the original limitation period will run from the return of the repaired Item to Buyer. The same will apply for replaced Items.
9. Buyer’s Applications and Compliance.
9.1 General. Buyer is solely responsible for the design, validation, and testing of its applications as well as for compliance with all legal, regulatory, and safety-related requirements concerning its applications. Industry best practices generally require that Buyer conducts qualification tests on actual applications taking into account possible environmental and other conditions that Buyer’s application may encounter. Buyer represents that, with respect to its applications, it has all the necessary expertise to create and implement safeguards that (1) anticipate dangerous consequences of failures, (2) monitor failures and their consequences, and (3) lessen the likelihood of failures that might cause harm, and to take appropriate remedial actions. Buyer agrees that prior to using or distributing any systems that include Items, Buyer will thoroughly test such systems and the functionality of such Items as used in such systems.
9.2 Industry Standards. Unless TI has explicitly designated an individual Item as meeting the requirements of a particular industry standard (e.g., ISO 9001, IATF 16949, ISO 26262, etc.), TI is not responsible for any failure to meet such industry standard requirements.
9.3 Safety Requirements. Where TI specifically promotes Items as facilitating or demonstrating functional safety features or as compliant with industry functional safety standards, such Items are intended to help enable customers to design and create their own applications that meet applicable functional safety standards and requirements. Using Items in an application does not by itself establish any safety features in the application. Buyer must ensure compliance with safety-related requirements and standards applicable to its applications.
9.4 Specifically Designated Qualification. TI may expressly designate certain Items as completing a particular qualification (e.g., AEC-Q100, Military Grade, or Enhanced Product). Buyer agrees that it has the necessary expertise to select the Item with the appropriate qualification designation for its applications, and that proper Item selection is at Buyer’s own risk. Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such selection.
9.5 No Diagnostic or Life-Critical Medical Use. Evaluation Items are not intended for use with or in connection with a patient or patient diagnostics. Evaluation Items are also not intended for use in Life-Critical Medical Equipment; however, they may be used for evaluation of TI Products in connection with Life-Critical Medical Equipment. Buyer may not use any Items in Life-Critical Medical Equipment unless authorized officers of the parties have executed a special contract specifically governing such use.
9.6 No Production Use. Evaluation Items are intended solely for product and/or software developers for use in a research and development setting to facilitate feasibility evaluation, experimentation, or scientific analysis of TI Products. Evaluation Items have no direct function and shall not be used in production applications, or production test platforms, or as test equipment. Buyer may use Evaluation Items for field testing (i.e. to evaluate Buyer’s application) only with TI’s advance written permission. Evaluation Items are not intended for consumer or household use.
9.7 Indemnification by Buyer. Buyer will fully indemnify TI and its representatives against any damages, costs, losses, and/or liabilities arising out of Buyer’s non-compliance with Section 9.
10. Intellectual Property Indemnification.
10.1 Subject to Sections 8, 9, 10.2 through 10.4 and 11, TI will defend Buyer against any claim, suit, or proceeding brought against Buyer, insofar as such claim, suit, or proceeding is based on an allegation that Products or Die Products manufactured and supplied by TI to Buyer directly infringe any United States, Canadian, Japanese, or European Union member country patent (excluding utility models), copyright, or trade secret (“Covered Claim”), and TI will pay any damages, losses, or costs (excluding consequential and exemplary damages) finally awarded against Buyer for a Covered Claim, or agreed to by TI as settlement or compromise of a Covered Claim.
TI has no obligation to defend or indemnify Buyer unless Buyer:
(a) promptly informs TI of the Covered Claim and furnishes TI a copy of the claim, suit, or proceeding,
(b) gives all evidence in Buyer’s possession, custody, or control to TI, and
(c) gives TI reasonable assistance in and sole control of the defense thereof and all negotiations for its settlement or compromise. Buyer agrees to make available to TI the benefit of any defense available to Buyer to any Covered Claim hereunder, including, but not limited to, any license or option to license or sub-license any intellectual property right that is the subject of such Covered Claim. Buyer will be entitled to participate in its defense at its own expense with counsel of its own choosing.
This Section 10.1 does not apply to Evaluation Items or Waver Products.
10.2 If TI is obligated to defend Buyer pursuant to Section 10.1, TI may, but has no obligation to:
(a) obtain a license that allows Buyer to continue the use of the Products or Die Products,
(b) if Buyer is enjoined from using the Products or Die Products, replace or modify the Products or Die Products so as to be non-infringing, but in a manner that does not materially affect the functionality of such Items, or
(c) if neither (a) nor (b) is available to TI at a commercially reasonable expense, then TI may stop shipping the Products or Die Products to Buyer without being in breach of this contract.
If TI elects to provide either of the options set forth in clauses (a) and (b) above, TI’s obligation pursuant to Section 10.1 will be entirely fulfilled as to that Covered Claim, except for any damages, losses, or costs (excluding consequential and exemplary damages) incurred by Buyer prior to TI taking such action. If TI elects the option set forth in clause (c) above, TI’s indemnity obligation under this contract will be entirely fulfilled, regardless of any additional claims, and Buyer will return to TI any and all Items remaining in Buyer’s possession, custody, or control.
10.3 TI will have no liability or obligation under Sections 10.1 or 10.2:
(a) if Buyer has not purchased the Items subject to the Covered Claim within the thirty-six (36) months preceding the date Buyer informed TI of the Covered Claim,
(b) if Buyer has not fully and promptly paid in full for the Items subject to the Covered Claim,
(c) if the Covered Claim arose because Buyer or Buyer’s customer brought a claim, suit, or proceeding against a third party,
(d) for any costs, losses, or damages resulting from Buyer’s willful acts, or any settlement or compromise incurred or made by Buyer without TI’s prior written consent, and
(e) to the extent that a Covered Claim is based upon:
i. Buyer’s use of the Items in combination with any other Item, device, software, or equipment,
ii. Buyer’s use of the Items in a process, including a manufacturing process,
iii. Buyer’s modifications to the Items,
iv. TI’s compliance with Buyer’s particular design, instructions or specifications, or
v. TI’s compliance with any industry or proprietary standard or Buyer’s use of the Items to enable implementation of any industry or proprietary standard (such claims - i.e., those set forth in (i) through (v) above - are individually and collectively referred to herein as “Other Claims”).
10.4 Buyer will defend TI against any claim, suit, or proceeding brought against TI insofar as such claim, suit, or proceeding is based on Other Claims, and Buyer will pay any damages, losses, or costs (excluding consequential and exemplary damages) finally awarded against TI for any Other Claims or agreed to by Buyer as settlement or compromise of any Other Claims. TI will be entitled to participate in its defense at its own expense with counsel of its own choosing.
11. Limitation of Liability.
11.1 TI is not liable for damages caused by slight negligence, except for such damages exist due to the breach of a material contractual obligation Buyer usually relies on, and may reasonably rely on, and in a manner endangering the purpose of the contract. In this case, the liability is limited to the damage which is typical and foreseeable. The latter will also apply to damages caused by gross negligence of an agent or employee of TI, who is not an officer or executive of TI.
11.2 In the case of Section 11.1 the limitation period for claims for damages will be twenty-four (24) months from the point in time the claim arose and Buyer became aware thereof. Regardless of Buyer´s awareness, the limitation period will be thirty-six (36) months from the damaging event. For claims for defects the limitation period as set out in Sections 8.1 and 8.5 will apply.
11.3 The above limitations of liability do not apply in the following cases: (i) liability under the German Product Liability Act (Produkthaftungsgesetz), (ii) defects for which a guarantee for the quality of the Item was provided (in this case, the provisions including the limitation period, if any, as set out in the guarantee will apply), (iii) fraudulently concealed defects, (iv) injury of life and limb, (v) intent and (vi) gross negligence of an officer or executive of TI.
11.4 The above limitations of liability will also apply in the case of Buyer´s claims for damages against TI´s officers, executives, employees or agents.
12. Non-Waiver of Default.
In the event of any default by Buyer, TI may decline to make further shipments. If TI elects to continue to make shipments, TI’s action will not be a waiver of any such default or affect TI’s legal remedies for any such default. Each shipment made under any order will be treated as a separate sale and transaction.
13. Governing Law and Venue.
This contract is governed by and interpreted in accordance with the substantive laws of the Federal Republic of Germany, without reference to the conflict of laws provisions. If for any reason a court of competent jurisdiction finds any provision of this contract to be unenforceable, that provision will be enforced to the maximum extent possible to effectuate the intent of the parties, and the remainder of this contract will continue in full force and effect. This contract is not governed by the United Nations Convention on Contracts for the International Sale of Goods. Buyer agrees that non-exclusive jurisdiction for any dispute arising out of or relating to this contract lies with Munich, Regional Court I [Landgericht München I]. Notwithstanding the foregoing, any judgment may be enforced in any German or foreign court, and TI may seek injunctive relief in any German or foreign court.
14. Export Control.
Exports, re-exports, and transfers of Items may be subject to U.S. export controls and sanctions as well as to other applicable national or international export control laws and regulations. Buyer acknowledges and agrees that: i) it will comply with all applicable laws and regulations; ii) Items may not be exported, re-exported, sold or transferred to U.S. embargoed, sanctioned, or restricted destinations, persons, or entities without first obtaining any necessary governmental authorization; and iii) it will provide notice of these compliance obligations to any party obtaining Item from Buyer.
Unless any necessary U.S. and other applicable government authorizations are obtained in advance, Buyer may not export, re-export, transfer, purchase, or sell any Item: (i) for a military end use; (ii) to a military end user; or (iii) for the design, development, fabrication, or use of nuclear, chemical, or biological weapons or missile technology. For additional information, see Part 744 of the U.S. Export Administration Regulations.
Each party shall, at its own expense, secure export and import authorizations necessary to fulfill its obligations under this Section 14. Buyer will indemnify and hold TI (including its agents and representatives) harmless against any damages, costs, losses, and/or liabilities arising out of any Buyer non-compliance with this Section 14. If any required authorization cannot be obtained, or in the event Buyer breaches this Section 14, TI may terminate, cancel, or otherwise be excused from any obligations that it may have under these Terms of Sale. Product classifications are for TI convenience only and shall not be construed as a representation or warranty of any kind; Buyer is responsible for its own compliance obligations.
This Section 14 will survive any termination or expiration of these Terms of Sale.
15. U.S. Government Contracts.
If Buyer intends to use Items in the performance of a U.S. Government contract or subcontract where Federal Acquisition Regulations, Defense Federal Acquisition Regulations Supplements, or other applicable government procurement rules or regulations (collectively, “Government Procurement Regulations”) will apply, Buyer will inform TI in writing of each applicable Government Procurement Regulation before Buyer submits an applicable purchase order for the Item. Unless otherwise agreed upon in writing and signed by TI, (i) no Government Procurement Regulations will apply, (ii) TI will not provide certified cost or pricing data, and (iii) Cost Accounting Standards, Defective Pricing, and Audit requirements will not apply.
16. Assignment and Third Party Beneficiaries.
This contract is not assignable by Buyer without TI’s prior written consent. Any unauthorized assignment is null and void. No provision in this contract confers any benefits, rights, or remedies to any person other than Buyer or TI. TI’s affiliates and subsidiaries may perform all or any part of TI’s obligations under this contract.
Buyer understands that the Wafer Maps and the regions between the individual Die, known as the scribe streets, in Wafer Products contain confidential information. Buyer agrees to protect the confidentiality of the Wafer Maps and the Wafer Products and to prevent any disclosure to third parties.
18. Evaluation Items Availability.
TI does not provide notice with respect to the modification or discontinuation of Evaluation Kits and/or Pre-Production Products.
This contract constitutes the entire agreement between the parties relating to the sale of Items and supersedes all previous communications, representations, or agreements, either oral or written, with respect to the subject matter hereof. No addition to or modification or waiver of any provision of this contract will be binding upon TI unless made in writing and signed by a duly authorized TI representative. Electronic communications, including emails and/or social media communications, are not signed writings for purpose of this section. No course of dealing or trade usage or course of performance will be relevant to explain or supplement any term in this contract. In the event of any conflict between these Terms of Sale and Appendix A, Appendix A shall prevail and govern with regard to TI.com Transactions. For all other transactions, these Terms of Sale will prevail notwithstanding any different, conflicting, or additional terms that may appear on any purchase order or other writing not expressly incorporated herein, including, but not limited to, data sheets, application notes, purchase order acknowledgements, and online communications. The section headings contained in this contract are for reference purposes only and will not affect in any way the meaning or interpretation of this contract.
Glossary of Defined Terms
- “Buyer” means a person or entity purchasing and/or taking delivery of Items directly from TI.
- “Covered Claim” has the meaning defined in Section 10.1
- “Days” means calendar days unless otherwise stated.
- “Die” means individual integrated circuits formed on a semiconductor wafer.
- “Die Products” means Die that passed TI probe test.
- “Estimated Ship Date” or “ESD” means the date estimated by TI for shipment of the Product from the applicable TI location.
- “Evaluation Item” means an Evaluation Kit, a Pre-Production Product, and/or a Sample. For clarity, and without limitation, the term “Evaluation Item” or “Evaluation Items” excludes: Products, services, marketing collateral, software, Wafer Products and Die Products.
- ”Evaluation Kit” means an electronic assembly sold or otherwise provided to Buyer for use in a research and development setting, outside of TI, to facilitate feasibility evaluation, experimentation, or scientific analysis primarily involving TI Products. Evaluation Kit(s) includes evaluation kits, evaluation modules (EVMs), evaluation boards, development kits, and emulators, and as-built reference designs.
- “Government Procurement Regulations” has the meaning set forth in Section 15.
- “Item” means Products, Evaluation Items, Die Products and/or Wafer Products.
- “Items with Title Reserved” has the meaning defined in Section 3.2.
- “Life-Critical Medical Equipment” means medical equipment where failure of such equipment would cause serious bodily injury or death (e.g., life support, pacemakers, defibrillators, heart pumps, neurostimulators, and implantables). Such equipment includes, without limitation, all medical devices identified by the U.S. Food and Drug Administration as Class III devices and equivalent classifications outside the U.S.
- “Non-Standard Product” means a Product, Die Product or Wafer Product designated by TI as “Non-Standard”. This designation includes products customized for a single customer, or non-custom products primarily purchased by a single customer. “Other Claim” has the meaning defined in Section 10.3(e).
- “Payment” means TI has received cleared funds from Buyer in TI’s bank account on or before the invoice due date.
- “Pre-Production Product” means a packaged integrated circuit product that TI has not qualified and released to market, and for which quality assurance, reliability performance testing and/or process qualification may not have been completed. The term “Pre-Production Product” includes prototypes, experimental devices, and devices designated as “advance” or “preview” in TI datasheets. For clarity, and without limitation, the term “Pre-Production Product” or “Pre-Production Products” excludes: services, reference designs, marketing collateral, software, Wafer Products, Die Products, and evaluation modules (EVMs). TI may provide these items or services to Buyer under separate terms.
- “Product” means a packaged integrated circuit product that TI has qualified and released to market. For clarity, and without limitation, the term “Product” or “Products” excludes: services, reference designs, marketing collateral, software, Evaluation Items (including TI’s Sample program), Wafer Products and Die Products.
- “Sample” means a Product or Pre-Production Product that TI provides to Buyer free of charge for evaluation or testing purposes.
- “Specification” means measurable electrical and physical characteristics of a particular Product, Die Product or Wafer Product listed in the then-current official data sheet (including errata) for that product.
- “Standard Product” means a Product, Die Product or Wafer Product designated by TI as “Standard”. This designation includes catalog products offered and/or sold to many customers.
- “Subsequent Performance” has the meaning defined in Section 8.2.
- “Wafer Map” means a document used to distinguish Die Products from Die that did not pass TI probe test for a particular Wafer Product.
- “Wafer Products” means a semiconductor wafer including a multitude of un-singulated Die Products and a multitude of un-singulated Die that did not pass TI probe test. For clarity, the term “Wafer Products” does not include Wafer Maps.
Appendix A: Supplemental Terms for TI.com Transactions
Please carefully read the following Supplemental Terms for TI.com Transactions, which are legally binding. For any questions regarding your TI.com order, please contact the TI support center via email or phone as specified here.
These Supplemental Terms apply to all orders You place through TI.com and all Items supplied by TI to You through TI.com ("TI.com Items") and are intended to supplement the Terms of Sale. Visiting TI.com and/or placing orders through TI.com are referred to as "TI.com Transactions".
If You are placing an order on behalf of a business, You represent and warrant that You are authorized to accept these Supplemental Terms as well as the Terms of Sale on behalf of the business. You agree that You will hold harmless and indemnify TI and its subsidiaries, officers, agents, and employees from any claim, suit or action due to Your culpable behavior arising from or related to Your order, the use of TI.com, or any violation of these Supplemental Terms or the Terms of Sale, including any liability or expense arising from claims, losses, damages, suits, judgments, litigation costs, and attorneys' fees.
1. TI.com Prices, Fees, Availability and Invoicing.
Prices are for TI.com Items only and do not include transaction taxes (such as value-added taxes, goods and services tax, consumption tax, sales tax), shipping charges, freight, duties, and other charges or fees, such as fees for special packaging and labeling of TI.com Items, permits, certificates, customs declarations and registration (collectively, "Additional Fees"). You are responsible for any Additional Fees.
TI cannot confirm the price or availability of a TI.com Item or Additional Fees before TI's acceptance of Your order (as described in Section 1 of the Terms of Sale). Despite TI's efforts, a small number of TI.com Items may be mispriced and/or Additional Fees may be miscalculated. If (i) the correct price of a TI.com Item is higher than the price stated on TI.com at the time You place Your order or such TI.com Item is not immediately available for shipment or (ii) the correct Additional Fees are higher than the Additional Fees stated on TI.com at the time You place Your order, TI may, at its discretion, either contact You for instructions before shipping Your order or reject Your order and notify You of such rejection. Product information, price, and availability of TI.com Items are subject to change at any time before acceptance of Your order without prior notice.
Final pricing of TI.com Items, Additional Fees and delivery and shipping details will appear on the financial invoice for Your order (the "Financial Invoice"), which will be available immediately prior to shipment. You may access Your Financial Invoice by logging into Your MyTI account and viewing Your order history, or if You placed Your order as a guest, by requesting a copy of Your Financial Invoice from the TI Support Center. If You elected to pay for Your order using a line of credit, You may have to access Your Financial Invoice through Your line of credit issuer instead.
2. TI.com Shipping and Delivery.
Unless TI notifies You otherwise, shipments will be delivered to the named place of destination indicated in Your order in accordance with the shipping terms indicated in the shipping instructions of Your order.
By placing an order, You authorize each vendor as TI may select to ship TI.com Items to pay Additional Fees on Your behalf to governmental authorities where applicable. Additional Fees may be charged directly to You and are not included in the price of Your order.
3. Returns and Refunds
Except and to the extent expressly required by applicable law, or as otherwise provided in these Supplemental Terms, TI does not offer any refunds, returns, or exchanges. Any refunds made will be made in full within thirty (30) business days from the day TI receives return of TI.com Items. No refunds will be made for any postage, packaging costs, or Additional Fees except as otherwise required by applicable law.
4. TI.com Payment Terms.
Unless otherwise agreed by You and TI in writing, all applicable Payments must be made in full prior to the time of shipment of TI.com Items. TI may preauthorize the approximate full order amount with Your credit or debit issuer at the time You place Your order which may impact Your available credit line. By confirming Your order at the end of the checkout process, You agree to accept and pay for the TI.com Items as well as all Additional Fees. Generally, You will not be charged for Your order until the order is shipped; however, You may be charged at the time Your order is placed depending on the payment method You select.
You represent and warrant that You have the right to use any credit card or other payment methods that You provide and that all billing information You provide to TI is truthful and accurate. TI may require additional information or verifications prior to accepting any order.
5. TI.com Use of Coupon Code.
At TI’s discretion, TI may provide coupon code to You. In order to redeem a coupon, You may enter the coupon code in the space provided and, if the coupon is valid, savings will appear at checkout. If the coupon code is not entered at the time of purchase, the coupon will not be honored. Coupons are not redeemable for cash or cash equivalent. Coupons cannot be used to make adjustments on previous purchases and are not transferable, not for resale and cannot be combined with any other offers, promotions, coupons or discounts.
Appendix B: Regulatory Notices for Evaluation Kits
1. United States.
Notice applicable to Evaluation Kits not FCC-Approved:
FCC NOTICE: This kit is designed to allow product developers to evaluate electronic components, circuitry, or software associated with the kit to determine whether to incorporate such items in a finished product and software developers to write software applications for use with the end product. This kit is not a finished product and when assembled may not be resold or otherwise marketed unless all required FCC equipment authorizations are first obtained. Operation is subject to the condition that this product not cause harmful interference to licensed radio stations and that this product accept harmful interference. Unless the assembled kit is designed to operate under part 15, part 18 or part 95 of this chapter, the operator of the kit must operate under the authority of an FCC license holder or must secure an experimental authorization under part 5 of this chapter. 3.1.2
For Evaluation Kits annotated as FCC – FEDERAL COMMUNICATIONS COMMISSION Part 15 Compliant:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
FCC Interference Statement for Class A Evaluation Kits
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Interference Statement for Class B Evaluation Kits
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
2. Canada. For Evaluation Kits issued with an Industry Canada Certificate of Conformance to RSS-210
Concerning Evaluation Kits Including Radio Transmitters:
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Concernant les Evaluation Kits avec appareils radio:
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Concerning Evaluation Kits Including Detachable Antennas:
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter has been approved by Industry Canada to operate with the antenna types listed in the user guide with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Concernant les Evaluation Kits avec antennes détachables:
Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement d'une communication satisfaisante. Le présent émetteur radio a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés dans le manuel d’usage et ayant un gain admissible maximal et l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur
Notice for Evaluation Kits delivered in Japan: Please see 日本国内に輸入される評価用キット、ボードについては、次のサイトをご覧ください。
Buyer is responsible for compliance with Japanese legal requirements for use of Evaluation Kits under applicable Japanese laws including Radio Law of Japan and Electrical Appliances and Materials Safety Act.
Notice for Users of Evaluation Kits Considered “Radio Frequency Products” in Japan: Evaluation Kits entering Japan may not be certified by TI as conforming to Technical Regulations of Radio Law of Japan. If user uses Evaluation Kits in Japan, not certified to Technical Regulations of Radio Law of Japan, user is required to follow the instructions set forth by Radio Law of Japan, which includes, but is not limited to, the instructions below with respect to Evaluation Kits (which for the avoidance of doubt are stated strictly for convenience and should be verified by user):
1. Use Evaluation Kits in a shielded room or any other test facility as defined in the notification #173 issued by Ministry of Internal Affairs and Communications on March 28, 2006, based on Sub-section 1.1 of Article 6 of the Ministry’s Rule for Enforcement of Radio Law of Japan,
2. Use Evaluation Kits only after user obtains the license of Test Radio Station as provided in Radio Law of Japan with respect to Evaluation Kits, or
3. Use of Evaluation Kits only after user obtains the Technical Regulations Conformity Certification as provided in Radio Law of Japan with respect to Evaluation Kits. Also, do not transfer Evaluation Kits, unless user gives the same notice above to the transferee. Please note that if user does not follow the instructions above, user will be subject to penalties of Radio Law of Japan.
【無線電波を送信する製品の開発キットをお使いになる際の注意事項】 開発キットの中には技術基準適合証明を受けて いないものがあります。 技術適合証明を受けていないもののご使用に際しては、電波法遵守のため、以下のいずれかの 措置を取っていただく必要がありますのでご注意ください。
1. 電波法施行規則第6条第1項第1号に基づく平成18年3月28日総務省告示第173号で定められた電波暗室等の試験設備でご使用 いただく。
なお、本製品は、上記の「ご使用にあたっての注意」を譲渡先、移転先に通知しない限り、譲渡、移転できないものとします。 上記を遵守頂けない場合は、電波法の罰則が適用される可能性があることをご留意ください。 日本テキサス・イ ンスツルメンツ株式会社 東京都新宿区西新宿６丁目２４番１号 西新宿三井ビル
Notice for Evaluation Kits for Power Line Communication: