RF-sampling 12-bit ADC with dual-channel 5.2 GSPS or single-channel 10.4 GSPS

ADC12DJ5200RF

ACTIVE

Product details

Sample rate (Max) (MSPS) 5200, 10400 Resolution (Bits) 12 Number of input channels 2, 1 Interface type JESD204B, JESD204C Analog input BW (MHz) 7900 Features Ultra High Speed Rating Catalog Input range (Vp-p) 0.825 Power consumption (Typ) (mW) 4000 Architecture Folding Interpolating SNR (dB) 55.6 ENOB (Bits) 8.8 SFDR (dB) 65 Operating temperature range (C) -40 to 85 Input buffer Yes
Sample rate (Max) (MSPS) 5200, 10400 Resolution (Bits) 12 Number of input channels 2, 1 Interface type JESD204B, JESD204C Analog input BW (MHz) 7900 Features Ultra High Speed Rating Catalog Input range (Vp-p) 0.825 Power consumption (Typ) (mW) 4000 Architecture Folding Interpolating SNR (dB) 55.6 ENOB (Bits) 8.8 SFDR (dB) 65 Operating temperature range (C) -40 to 85 Input buffer Yes
FCBGA (AAV) 144 100 mm² 10 x 10
  • ADC core:
    • 12-bit resolution
    • Up to 10.4 GSPS in single-channel mode
    • Up to 5.2 GSPS in dual-channel mode
  • Performance specifications:
    • Noise floor (–20 dBFS, VFS = 1 VPP-DIFF):
      • Dual-channel mode: –151.8 dBFS/Hz
      • Single-channel mode: –154.4 dBFS/Hz
    • ENOB (dual channel, FIN = 2.4 GHz): 8.6 Bits
  • Buffered analog inputs with VCMI of 0 V:
    • Analog input bandwidth (–3 dB): 8 GHz
    • Usable input frequency range: > 10 GHz
    • Full-scale input voltage (VFS, default): 0.8 VPP
  • Noiseless aperture delay (tAD) adjustment:
    • Precise sampling control: 19-fs Step
    • Simplifies synchronization and interleaving
    • Temperature and voltage invariant delays
  • Easy-to-use synchronization features:
    • Automatic SYSREF timing calibration
    • Timestamp for sample marking
  • JESD204C serial data interface:
    • Maximum lane rate: 17.16 Gbps
    • Support for 64b/66b and 8b/10b encoding
    • 8b/10b modes are JESD204B compatible
  • Optional digital down-converters (DDC):
    • 4x, 8x, 16x and 32x complex decimation
    • Four independent 32-Bit NCOs per DDC
  • Peak RF Input Power (Diff): +26.5 dBm (+ 27.5 dBFS, 560x fullscale power)
  • Programmable FIR filter for equalization
  • Power consumption: 4 W
  • Power supplies: 1.1 V, 1.9 V
  • ADC core:
    • 12-bit resolution
    • Up to 10.4 GSPS in single-channel mode
    • Up to 5.2 GSPS in dual-channel mode
  • Performance specifications:
    • Noise floor (–20 dBFS, VFS = 1 VPP-DIFF):
      • Dual-channel mode: –151.8 dBFS/Hz
      • Single-channel mode: –154.4 dBFS/Hz
    • ENOB (dual channel, FIN = 2.4 GHz): 8.6 Bits
  • Buffered analog inputs with VCMI of 0 V:
    • Analog input bandwidth (–3 dB): 8 GHz
    • Usable input frequency range: > 10 GHz
    • Full-scale input voltage (VFS, default): 0.8 VPP
  • Noiseless aperture delay (tAD) adjustment:
    • Precise sampling control: 19-fs Step
    • Simplifies synchronization and interleaving
    • Temperature and voltage invariant delays
  • Easy-to-use synchronization features:
    • Automatic SYSREF timing calibration
    • Timestamp for sample marking
  • JESD204C serial data interface:
    • Maximum lane rate: 17.16 Gbps
    • Support for 64b/66b and 8b/10b encoding
    • 8b/10b modes are JESD204B compatible
  • Optional digital down-converters (DDC):
    • 4x, 8x, 16x and 32x complex decimation
    • Four independent 32-Bit NCOs per DDC
  • Peak RF Input Power (Diff): +26.5 dBm (+ 27.5 dBFS, 560x fullscale power)
  • Programmable FIR filter for equalization
  • Power consumption: 4 W
  • Power supplies: 1.1 V, 1.9 V

The ADC12DJ5200RF device is an RF-sampling, giga-sample, analog-to-digital converter (ADC) that can directly sample input frequencies from DC to above 10 GHz. ADC12DJ5200RF can be configured as a dual-channel, 5.2 GSPS ADC or single-channel, 10.4 GSPS ADC. Support of a useable input frequency range of up to 10 GHz enables direct RF sampling of L-band, S-band, C-band, and X-band for frequency agile systems.

The ADC12DJ5200RF uses a high-speed JESD204C output interface with up to 16 serialized lanes supporting up to 17.16 Gbps line rate. Deterministic latency and multi-device synchronization is supported through JESD204C subclass-1. The JESD204C interface can be configured to trade-off line rate and number of lanes. Both 8b/10b and 64b/66b data encoding schemes are supported. 64b/66b encoding supports forward error correction (FEC) for improved bit error rates. The interface is backwards compatible with JESD204B receivers.

Innovative synchronization features, including noiseless aperture delay adjustment and SYSREF windowing, simplify system design for multi-channel applications. Optional digital down converters (DDCs) are available to provide digital conversion to baseband and to reduce the interface rate. A programmable FIR filter allows on-chip equalization.

The ADC12DJ5200RF device is an RF-sampling, giga-sample, analog-to-digital converter (ADC) that can directly sample input frequencies from DC to above 10 GHz. ADC12DJ5200RF can be configured as a dual-channel, 5.2 GSPS ADC or single-channel, 10.4 GSPS ADC. Support of a useable input frequency range of up to 10 GHz enables direct RF sampling of L-band, S-band, C-band, and X-band for frequency agile systems.

The ADC12DJ5200RF uses a high-speed JESD204C output interface with up to 16 serialized lanes supporting up to 17.16 Gbps line rate. Deterministic latency and multi-device synchronization is supported through JESD204C subclass-1. The JESD204C interface can be configured to trade-off line rate and number of lanes. Both 8b/10b and 64b/66b data encoding schemes are supported. 64b/66b encoding supports forward error correction (FEC) for improved bit error rates. The interface is backwards compatible with JESD204B receivers.

Innovative synchronization features, including noiseless aperture delay adjustment and SYSREF windowing, simplify system design for multi-channel applications. Optional digital down converters (DDCs) are available to provide digital conversion to baseband and to reduce the interface rate. A programmable FIR filter allows on-chip equalization.

Download

Similar products you might be interested in

open-in-new Compare products
Pin-for-pin with same functionality to the compared device.
NEW ADC08DJ5200RF ACTIVE RF-sampling 8-bit ADC with dual-channel 5.2 GSPS or single-channel 10.4 GSPS ADC08DJ5200RF offers lower resolution and no DDC.
NEW ADC12DJ4000RF ACTIVE RF-sampling 12-bit ADC with 4-GSPS dual channel or 8-GSPS single channel ADC12DJ4000RF offers lower power with the same features.

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

ADC12DJ5200RFEVM — ADC12DJ5200RF RF-sampling 12-bit dual 5.2-GSPS or single 10.4-GSPS ADC evaluation module

The ADC12DJ5200RF evaluation module (EVM) allows for the evaluation of device ADC12DJ5200RF. The ADC12DJ5200RF is a low-power, 12-bit, dual 5.2-GSPS/single 10.4-GSPS, RF-sampling analog-to-digital converter (ADC) with a buffered analog input, integrated digital down converter with programmable NCO (...)

Evaluation board

TSW14J58EVM — Data capture/pattern generator: data converter EVM with 16 JESD204B/C lanes from 1.6 to 24.5 Gbps

The TSW14J58 evaluation module (EVM) is a next-generation data capture card used to evaluate the performance of the TI JESD204B/C family of high-speed analog-to-digital converters (ADCs), high-speed digital-to-analog converters (DACs), and analog front ends (AFEs).

Populated with a Xilinx® (...)

In stock
Limit: 3
Evaluation board

ANNAP-3P-WWDM60 — Annapolis Microsystems 4-channel ADC, 2-channel DAC FPGA mezzanine card up to 10GSPS

This high performance WILD FMC+ DM60 ADC & DAC has two input bandwidth options, internal sample clock options and internal 10MHz reference clock options. The WWDM60 has a choice of speed grades that utilize the ADC12DJ2700, ADC12DJ3200 and ADC12DJ5200RF up to 10GSPS. It allows for ADC and DAC (...)
From: Annapolis Micro Systems
Firmware

TI-JESD204-IP — JESD204 Rapid Design IP for FPGAs connected to TI high-speed data converters

The JESD204 rapid design IP has been designed to enable FPGA engineers to achieve an accelerated path to a working JESD204 system. The IP has been architected in a way that downstream digital processing and other application logic are isolated from most of the performance- and timing-critical (...)
Support software

DATACONVERTERPRO-SW — High-speed data converter pro software

This high-speed data converter pro GUI is a PC (Windows® XP/7/10 compatible) program designed to aid in evaluation of most TI high-speed data converter and analog front-end (AFE) platforms. Designed to support the entire TSW14xxx series of data-capture and pattern-generation cards (...)
Simulation model

ADC12DJ5200RF IBIS Model

SLVMCW9.ZIP (37 KB) - IBIS Model
Simulation model

ADC12DJ5200RF IBIS-AMI Model

SLVMD65.ZIP (1533 KB) - IBIS-AMI Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Calculation tool

FREQ-DDC-FILTER-CALC — RF-Sampling Frequency Planner, Analog Filter, and DDC Excel™ Calculator

This Excel calculator provides system designers a way to simplify the design and debugging of direct RF-sampling receivers. It offers three functions: frequency planning, analog filtering, and decimation filter spur location.

In the concept phase, a frequency-planning tool enables fine tuning of both (...)

Design tool

ADC12DJ5200RF-EVM Assembly Package (Rev. A)

SLVRBH0A.ZIP (41092 KB)
Schematic

ADC12DJ5200RFEVM Design Files (Rev. B)

SLVC778B.ZIP (13823 KB)
Reference designs

TIDA-010128 — Scalable 20.8 GSPS reference design for 12 bit digitizers

This reference design describes a 20.8 GSPS sampling system using RF sampling analog-to-digital converters (ADCs) in time interleaved configuration. Time interleaving method is a proven and traditional way of increasing sample rate, however, matching individual ADCs offset, gain and sampling time (...)
Reference designs

TIDA-01028 — 12.8-GSPS analog front end reference design for high-speed oscilloscope and wide-band digitizer

This reference design provides a practical example of interleaved RF-sampling analog-to-digital converters (ADCs) to achieve a 12.8-GSPS sampling rate. This is achieved by time-terleaving two RF-sampling ADCs. Interleaving requires a phase shift between the ADCs, which this reference design achieves (...)
Reference designs

TIDA-01027 — Low noise power-supply reference design maximizing performance in 12.8 GSPS data acquisition systems

This reference design demonstrates an efficient, low noise 5-rail power-supply design for very high-speed DAQ systems capable of > 12.8 GSPS. The power supply DC/DC converters are frequency synchronized and phase-shifted in order to minimize input current ripple and control frequency content (...)
Package Pins Download
(ZEG) 144 View options
FCBGA (AAV) 144 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos