NEW

ADC3664

ACTIVE

Dual-channel, 14-bit, 125-MSPS, high-SNR, low-power ADC with SLVDS interface

Top

Product details

Parameters

Sample rate (Max) (MSPS) 125 Resolution (Bits) 14 Number of input channels 2 Interface type Serial LVDS Analog input BW (MHz) 1400 Features High Dynamic Range, High Performance, Low Power Rating Catalog Input range (Vp-p) 3.2 Power consumption (Typ) (mW) 200 Architecture SAR SNR (dB) 77.5 ENOB (Bits) 12.6 SFDR (dB) 84 Operating temperature range (C) -40 to 105 Input buffer No open-in-new Find other High-speed ADCs (>10MSPS)

Package | Pins | Size

WQFN (RSB) 40 25 mm² 5 x 5 open-in-new Find other High-speed ADCs (>10MSPS)

Features

  • 14-Bit 125 MSPS ADC
  • Noise floor: –156.9 dBFS/Hz
  • Low power consumption: 100 mW/ch
  • Latency: 2 clock cycles
  • Voltage reference:
    • External: 65 to 125 MSPS
    • Internal: 100 to 125 MSPS
  • Guaranteed 14-Bit, no missing codes
  • Input bandwidth: 1.4 GHz (3 dB)
  • INL: ±2.6 LSB; DNL: ±0.9 LSB
  • Industrial temperature range: –40°C to +105°C
  • On-chip digital filter (optional)
    • Decimation by 2, 4, 8, 16, 32
    • 32-bit NCO
  • Serial LVDS digital interface (2-, 1- and 1/2-wire)
  • Small Footprint: 40-VQFN (5 mm × 5 mm) package
  • Spectral performance (fIN = 5 MHz):
    • SNR: 77.5 dBFS
    • SFDR: 84-dBc HD2, HD3
    • SFDR: 92-dBFS worst spur
  • Spectral performance (fIN = 70 MHz):
    • SNR: 75.5 dBFS
    • SFDR: 76-dBc HD2, HD3
    • SFDR: 84-dBFS worst spur
open-in-new Find other High-speed ADCs (>10MSPS)

Description

The ADC3664 device is a low-noise, ultra-low power, 14-bit, 125-MSPS, high-speed dual channel ADC. Designed for lowest noise performance, the device delivers a noise spectral density of –156.9 dBFS/Hz combined with excellent linearity and dynamic range. The ADC3664 offers IF sampling support which makes the device ideally suited for a wide range of applications. High-speed control loops benefit from the short latency as low as one clock cycle. The ADC consumes only 100 mW/ch at 125 MSPS and its power consumption scales very well with lower sampling rates.

The ADC3664 uses a serial LVDS (SLVDS) interface to output the data which minimizes the number of digital interconnects. The device supports a two-lane, one-lane and half-lane option. The ADC3664 is pin-to-pin compatible with a family of 16-bit resolution ADCs. The device supports the extended industrial temperature range from –40 to +105⁰C.

open-in-new Find other High-speed ADCs (>10MSPS)
Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 8
Type Title Date
* Data sheet ADC3664 14-Bit, 125-MSPS, Low-Noise, Low Power Dual Channel ADC datasheet (Rev. A) Aug. 02, 2021
Certificate ADC3664EVM EU RoHS Declaration of Conformity (DoC) Dec. 14, 2020
User guide ADC3664EVM User's Guide Nov. 04, 2020
Technical article Keys to quick success using high-speed data converters Oct. 13, 2020
Application note How to simplify AFE filtering via high‐speed ADCs with internal digital filters Jan. 10, 2020
Technical article How to achieve fast frequency hopping Mar. 03, 2019
Technical article RF sampling: Learning more about latency Feb. 09, 2017
Technical article Why phase noise matters in RF sampling converters Nov. 28, 2016

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
document-generic User guide
249
Description

The ADC3664 evaluation module (EVM) demonstrates the performance of the ADC3664, which is an ultra-low-power, high-linearity, analog-to-digital converter (ADC). Onboard voltage regulation and flexible analog input options allow easy evaluation for many different applications.

For a complete (...)

Features
  • Serial LVDS interface
  • USB powered with onboard power regulation
  • Pin compatible with ADC366x and ADC368x products
  • THS4541 FDA and Balun-coupled inputs allow for flexible evaluation
  • TSW1400EVM and DATACONVERTERPRO-SW allow for easy data capture
  • FMC connector allows for easy integration with FPGA (...)

Software development

SUPPORT SOFTWARE Download
High-speed data converter pro software
DATACONVERTERPRO-SW This high-speed data converter pro GUI is a PC (Windows® XP/7/10 compatible) program designed to aid in evaluation of most TI high-speed data converter and analog front-end (AFE) platforms. Designed to support the entire TSW14xxx series of data-capture and pattern-generation cards (...)
Features
  • Compatible with TSW1400, TSW1405, TSW1406, TSW14J10, TSW14J50, TSW14J56, TSW14J57 and TSW14J58 pattern-generation and data-capture platforms
  • Works with all TI high-speed DAC, ADC, and AFE products
  • Provides time-domain and frequency-domain analysis
  • Supports single-tone, multi-tone, and modulated (...)

Design tools & simulation

SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)

CAD/CAE symbols

Package Pins Download
WQFN (RSB) 40 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos