ADS1192

ACTIVE

16-bit, 2-ch, Low-Power Analog Front END (AFE) for ECG Applications

Top

Product details

Parameters

Resolution (Bits) 16 Number of input channels 2 Sample rate (Max) (kSPS) 8 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-Ended Multi-channel configuration Simultaneous Sampling Rating Catalog Reference mode Int, Ext Input range (Max) (V) 5.25 Input range (Min) (V) 0 Features Daisy-Chainable, GPIO, Oscillator, PGA Operating temperature range (C) -40 to 85 Power consumption (Typ) (mW) 0.67 Analog voltage AVDD (Min) (V) 2.7 SNR (dB) 92 Analog voltage AVDD (Max) (V) 5.25 INL (Max) (+/-LSB) 1 Digital supply (Min) (V) 1.7 Digital supply (Max) (V) 3.6 open-in-new Find other Precision ADCs (<=10MSPS)

Package | Pins | Size

TQFP (PBS) 32 49 mm² 7 x 7 VQFN (RSM) 32 16 mm² 4 x 4 open-in-new Find other Precision ADCs (<=10MSPS)

Features

  • Two Low-Noise PGAs and
    Two High-Resolution ADCs (ADS1192)
  • Low Power: 335 µW/channel
  • Input-Referred Noise: 24 µVPP
    (150-Hz BW, G = 6)
  • Input Bias Current: 1 nA
  • Data Rate: 125 SPS to 8 kSPS
  • CMRR: –95 dB
  • Programmable Gain: 1, 2, 3, 4, 6, 8, or 12
  • Supplies: Unipolar or Bipolar
    • Analog: 2.7 V to 5.25 V
    • Digital: 1.7 V to 3.6 V
  • Built-In Right Leg Drive Amplifier, Lead-Off Detection, Test Signals
  • Built-In Oscillator and Reference
  • Flexible Power-Down, Standby Mode
  • SPI™-Compatible Serial Interface
  • Operating Temperature Range: –40°C to +85°C
open-in-new Find other Precision ADCs (<=10MSPS)

Description

The ADS1191/2 are a family of multichannel, simultaneous sampling, 16-bit, delta-sigma (ΔΣ) analog-to-digital converters (ADCs) with a built-in programmable gain amplifier (PGA), internal reference, and an onboard oscillator.

The ADS1191/2 incorporate all of the features that are commonly required in portable, low-power medical electrocardiogram (ECG), sports, and fitness applications.

With its high levels of integration and exceptional performance, the ADS1191/2 family enables the creation of scalable medical instrumentation systems at significantly reduced size, power, and overall cost.

The ADS1191/2 have a flexible input multiplexer per channel that can be independently connected to the internally-generated signals for test, temperature, and lead-off detection. Additionally, any configuration of input channels can be selected for derivation of the right leg drive (RLD) output signal. The ADS1191/2 operate at data rates up to 8 kSPS. Lead-off detection can be implemented internal to the device, using the device internal excitation current sink/source.

The devices are packaged in a 5-mm × 5-mm, 32-pin thin quad flat pack (TQFP). Operating temperature is specified from –40°C to +85°C.

open-in-new Find other Precision ADCs (<=10MSPS)
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 12
Type Title Date
* Datasheet Low-Power, 2-Channel, 16-Bit Analog Front-End for Biopotential Measurements datasheet (Rev. A) Sep. 04, 2012
White papers Fundamentals of Precision ADC Noise Analysis Jun. 19, 2020
Application notes QFN and SON PCB Attachment (Rev. B) Aug. 24, 2018
Application notes Digital Filter Types in Delta-Sigma ADCs Jun. 27, 2017
Application notes How delta-sigma ADCs work, Part 1 (Rev. A) Sep. 19, 2016
White papers Best of Baker's Best: Precision Data Converters -- Delta-Sigma ADCs Mar. 19, 2015
Application notes Understanding Lead-Off Detection in ECG (Rev. A) Jan. 14, 2015
User guides ADS1x9xECG-FE User's Guide (Rev. A) Apr. 04, 2012
Application notes How delta-sigma ADCs work, Part 2 Nov. 09, 2011
Application notes Improving Common-Mode Rejection Using the Right-Leg Drive Amplifier Jul. 06, 2011
Application notes Respiration Rate Measurement Using Impedance Pneumography Mar. 01, 2011
Application notes Analog Front-End Design for ECG Systems Using Delta-Sigma ADCs (Rev. A) Apr. 13, 2010

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
Description

The ADS1x9xECG FE is a demonstration kit for the ADS1192 and ADS1292, a two channel, simultaneous sampling, 16-bit or 24-bit, delta-sigma(ΔΣ) analog-to-digital converter (ADC) with a built-in programmable gain amplifier (PGA), internal reference, and an on-board oscillator. The ADS1192 (...)

Features
  • Easy-to-use evaluation software for Microsoft™ Windows XP or Windows 7
  • Built-in analysis tools including oscilloscope, FFT, and histogram displays
  • Flexible input configurations
  • Digital Low Pass, High Pass, and 50/60Hz notch filters for post processing
  • Real time data streaming from the demo board to the (...)
EVALUATION BOARDS Download
document-generic User guide
99
Description

The ADS1x9xECG FE is a demonstration kit for the ADS1192 and ADS1292, a two channel, simultaneous sampling, 16-bit or 24-bit, delta-sigma (ΔΣ) analog-to-digital converter (ADC) with a built-in programmable gain amplifier (PGA), internal reference, and an on-board oscillator. The ADS1192 (...)

Features
  • Easy-to-use evaluation software for Microsoft™ Windows XP or Windows 7
  • Built-in analysis tools including oscilloscope, FFT, and histogram displays
  • Flexible input configurations
  • Digital Low Pass, High Pass, and 50/60Hz notch filters for post processing
  • Real time data streaming from the demo board to the (...)
EVALUATION BOARDS Download
document-generic User guide
99
Description

The ADS1x9xECG FE is a demonstration kit for the ADS1292R, a two channel, simultaneous sampling, 24-bit, delta-sigma (ΔΣ) analog-to-digital converter (ADC) with a built-in programmable gain amplifier (PGA), internal reference, and respiration measurement. The ADS1292R chip incorporates (...)

Features
  • Easy-to-use evaluation software for Microsoft™ Windows XP or Windows 7
  • Built-in analysis tools including oscilloscope, FFT, and histogram displays
  • Flexible input configurations
  • Integrated Respiration Impedance
  • Digital Low Pass, High Pass, and 50/60Hz notch filters for post processing
  • Real time data (...)

Design tools & simulation

SIMULATION MODELS Download
SBAM080C.ZIP (144 KB) - IBIS Model
SIMULATION TOOLS Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOLS Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide
CALCULATION TOOLS Download
Analog-to-digital converter (ADC) input driver design tool supporting multiple input types
ADC-INPUT-CALC ADC-INPUT-CALC is an online tool that provides support for designing the input buffer to an analog-to-digital converter (ADC). It offers 24 different op-amp based buffer circuits that can be used to drive an ADC input. The available topologies cover differential, single-ended and transformer-coupled (...)
CALCULATION TOOLS Download
Analog engineer's calculator
ANALOG-ENGINEER-CALC — The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Features
  • Expedites circuit design with analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)
    • Noise calculations
    • Common unit translation
  • Solves common amplifier circuit design problems
    • Gain selections using standard resistors
    • Filter configurations
    • Total noise for common amplifier configurations
  • (...)

Reference designs

REFERENCE DESIGNS Download
Wireless Heart Monitor with Bluetooth Low Energy
TIDA-00096 The Wireless Heart Rate Monitor with Bluetooth low-energy (BLE) is intended as a reference design that customers can use to develop end-products for battery-powered, 3-channel health and fitness electrocardiogram (ECG) applications.  The ADS1293 is a highly integrated low-power analog front end (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
TQFP (PBS) 32 View options
VQFN (RSM) 32 View options

Ordering & quality

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos