ADS9218
Two-channel, simultaneous-sampling, 18-bit 10-MSPS SAR ADC with fully-differential ADC input driver
ADS9218
- High-speed, 10-MSPS/ch sampling rate
- ADS9218: 10 MSPS/ch
- ADS9217: 5 MSPS/ch
- 2-channel, simultaneous sampling
- Feature integration:
- Integrated ADC driver
- Integrated precision reference
- Common-mode voltage output buffer
- High-performance
- 18-bit no missing codes
- INL: ±1 LSB, DNL: ±0.75 LSB
- SNR: 95 dB, THD: –115 dB at fIN = 2 kHz
- Wide input bandwidth:
- ADS9218: 90 MHz (–3 dB)
- ADS9217: 45 MHz (–3 dB)
- Low-power 180 mW/ch at 10 MSPS/ch
- Serial LVDS interface:
- SDR and DDR output modes
- Synchronous clock and data output
- Extended operating range: –40°C to +125°C
- 6-mm × 6-mm VQFN package
The ADS921x is an 18-bit, 10-MSPS/ch, dual-channel, simultaneous-sampling, analog-to-digital converter (ADC) with an integrated driver for the ADC inputs. The ADC consumes only 180 mW/ch at 10 MSPS/ch and the power consumption scales with lower sampling rates.
The ADS921x uses a serial low-voltage differential signaling (SLVDS) data interface that enables high-speed digital interface while minimizing digital switching noise. The device comes in a space-saving, 6-mm × 6-mm, VQFN package.
The ADS921x is specified for the extended temperature range of –40°C to +125°C.
Technical documentation
Type | Title | Date | ||
---|---|---|---|---|
* | Data sheet | ADS921x Dual, Simultaneous Sampling, 18-Bit, 10-MSPS SAR ADC With Fully Differential ADC Input Driver datasheet | PDF | HTML | 30 Jan 2023 |
Product overview | Precision ADCs for Motor Encoders and Position Sensing | PDF | HTML | 27 Mar 2023 | |
Application brief | Low Latency Signal-Chain for Measurement Unit in Digital Control Loop | PDF | HTML | 22 Feb 2023 | |
Circuit design | ADS9218 Power-Optimized Signal Chain Circuit | PDF | HTML | 21 Oct 2022 | |
Application note | Simplify Antialiasing Filters With ADS9218 | PDF | HTML | 21 Oct 2022 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
ADS9218EVM-PDK — ADS9218 performance demonstration kit for two-channel, simultaneous-sampling, 18-bit 10-MSPS SAR ADC
The ADS9218 evaluation module (EVM) performance demonstration kit (PDK) is a platform for evaluating the ADS9218, which is a two-channel, 18-bit, 10-MSPS (per channel) analog-to-digital converter (ADC) with a fully-differential input driver.
ADS9218EVM-PDK includes an interposer card that allows (...)
ANALOG-ENGINEER-CALC — PC software analog engineer's calculator
The analog engineer’s calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting operational-amplifier (...)
Supported products & hardware
Products
Precision op amps (Vos<1mV)
General-purpose op amps
Audio op amps
Transimpedance amplifiers
High-speed op amps (GBW ≥ 50 MHz)
Power op amps
Video amplifiers
Line drivers
Transconductance amplifiers & laser drivers
Fully differential amplifiers
Precision ADCs
Biosensing AFEs
High-speed ADCs (≥10 MSPS)
Receivers
Touchscreen controllers
Difference amplifiers
Instrumentation amplifiers
Audio line receivers
Analog current-sense amplifiers
Digital power monitors
Analog current-sense amplifiers with integrated shunt resistor
Digital power monitors with integrated shunt resistor
Die & wafer services
PSPICE-FOR-TI — PSpice® for TI design and simulation tool
TINA-TI — SPICE-based analog simulation program
Package | Pins | Download |
---|---|---|
VQFN (RHA) | 40 | View options |
Ordering & quality
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
- Fab location
- Assembly location
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.