Top

Product details

Parameters

Number of series cells 1, 2, 3, 4 Charge current (Max) (A) 8 Operating Vin (Max) (V) 24 Cell chemistry Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4 Battery charge voltage (Min) (V) 1.024 Battery charge voltage (Max) (V) 19.2 Absolute Vin (safety rating) (Max) ((V)) 30 Control topology Switch-Mode Buck Control interface SMBus Features IINDPM (Input current limit), Input OVP, Power Path Operating Vin (Min) (V) 4.5 Rating Catalog open-in-new Find other Battery charger ICs

Package | Pins | Size

WQFN (RUY) 28 16 mm² 4 x 4 open-in-new Find other Battery charger ICs

Features

  • Host-controlled NVDC-1 1S-4S Battery Charge Controller with 4.5-24 V Input Range
    • Support SMBus (bq24770) and I2C (bq24773)
    • System Instant-on Operation with no Battery or Deeply Discharged Battery
    • Supplement Mode with Synchronous BATFET Control when Adaptor is fully loaded
  • Ultra Fast Input Current DPM at 100 µs
  • Ultra Low Quiescent Current of 600 µA and High PFM Light Load Efficiency >80% at 20 mA Load to Meet Energy Star and ErP Lot6.
  • High Accuracy Power / Current Monitor for CPU Throttling
    • Comprehensive PROCHOT Profile
    • Input and Battery Current Monitor (IADP/IBAT)
    • System Power Monitor (PMON)
  • Programmable Input Current Limit, Charge Voltage, Charge Current and Minimum System Voltage Regulation
    • ±0.5% Charge Voltage (16 mV/step)
    • ±2% Input/charge Current (64 mA/step)
    • ±2% 40x Input / 16x Discharge / 20x Charge Current Monitor
  • Support Battery LEARN Function
  • High Integration
    • NMOS ACFET and RBFET Driver
    • PMOS battery FET Gate Driver
    • Internal Loop Compensation
    • Independent Comparator
    • Automatic Trickle Charge to Wake up Gas Gauge
  • 600kHz to 1.2MHz Programmable Switching Frequency
open-in-new Find other Battery charger ICs

Description

The bq2477x is high-efficiency, synchronous, NVDC-1 battery charge controllers, offering low component count for space-constraint, multi-chemistry battery charging applications.

The power path management allows the system to be regulated at battery voltage but does not drop below system minimum voltage (programmable). With this feature, the system keeps operating even when the battery is completely discharged or removed. The power path management allows the battery to provide supplement current to the system to keep the input supply from being overloaded.

The bq2477x provides drivers and power path management for N-channel ACFET and reverse blocking FET. The devices provides driver to control NVDC operation of external P-channel battery FET. It also drives high-side and low-side MOSFETs of the switching regulator.

The bq2477x monitors adapter current (IADP), battery charge/discharge current (IBAT) and system power (PMON). The flexibly programmed PROCHOT output goes directly to CPU for throttle back when needed.

open-in-new Find other Battery charger ICs
Download

Technical documentation

= Featured
No results found. Please clear your search and try again. View all 7
Type Title Date
* Datasheet bq2477x NVDC Battery Charge Controller With System Power Monitor and Processor Hot Indicator datasheet (Rev. C) Dec. 19, 2016
Technical articles When to use rechargeable batteries in small battery applications Oct. 01, 2019
User guides bq2477x EVM User’s Guide (Rev. C) Nov. 08, 2016
Technical articles Understanding battery charger features and charging topologies Sep. 19, 2016
Technical articles Selecting the right battery charger for industrial applications Jul. 13, 2016
Application notes Implementing Peak Power Shift Function With bq24770 May 19, 2016
Technical articles Should I use a linear charger or a switching charger? Oct. 30, 2015

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
$99.00
Description

The bq2477x evaluation module (EVM) is an SMBus controlled NVDC-1 charge controller with N-CH MOSFET Selector and Current Monitoring. The input voltage range, for the buck converter, is between 6 and 24 V, with a programmable output of 1–4 cells (bq2477x) and a charge output current range of (...)

Features
  • Host-controlled NVDC-1 1S-4S Battery Charge controller : bq24770 SMBus; bq24773 I2C
  • Provide test point for /PROCHOT, IADP, IBAT, PMON, ILIM, REGN, ACOK, ACDET and switching node
  • Programmable Input Current Limit, Charge Voltage, Charge Current and Minimum System

CAD/CAE symbols

Package Pins Download
WQFN (RUY) 28 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​