Product details

Cell chemistry Li-Ion/Li-Polymer Number of series cells 1-2 Cells Communication interface HDQ Battery capacity (Min) (mAh) 100 Battery capacity (Max) (mAh) 14000 Implementation Pack External capacity indication None Features Cell Balancing, Impedance Track™ algorithm, Integrated Protector, SHA-1 Authentication Operating temperature range (C) -40 to 85 Cell balancing External, Internal
Cell chemistry Li-Ion/Li-Polymer Number of series cells 1-2 Cells Communication interface HDQ Battery capacity (Min) (mAh) 100 Battery capacity (Max) (mAh) 14000 Implementation Pack External capacity indication None Features Cell Balancing, Impedance Track™ algorithm, Integrated Protector, SHA-1 Authentication Operating temperature range (C) -40 to 85 Cell balancing External, Internal
VSON (DRZ) 12 10 mm² 4 x 2.5
  • High-Accuracy Coulomb Counter with Input Offset
    Error < 1 µV (Typical)
  • High-Side FET Drive Allows Serial Bus
    Communication During Fault Conditions
  • Analog Front End with Two Independent ADCs
    • Support for Simultaneous Current and Voltage
      Sampling
  • Bus Communications Interface Options
    • I2C
    • HDQ
  • SHA-1 Hash Message Authentication Code
    (HMAC) Responder for Increased Battery Pack
    Security
    • Split Key (2 × 64) Stored in Secure Memory
  • Programmable Protection Levels for:
    • Overcurrent in Discharge
    • Short-Circuit Current in Charge
    • Short-Circuit Current in Discharge
    • Overvoltage
    • Undervoltage
    • Overtemperature
  • Supports a 1-mΩ to 3-mΩ Current Sense Resistor
  • Compact 12-Terminal SON Package (DRZ)
  • High-Accuracy Coulomb Counter with Input Offset
    Error < 1 µV (Typical)
  • High-Side FET Drive Allows Serial Bus
    Communication During Fault Conditions
  • Analog Front End with Two Independent ADCs
    • Support for Simultaneous Current and Voltage
      Sampling
  • Bus Communications Interface Options
    • I2C
    • HDQ
  • SHA-1 Hash Message Authentication Code
    (HMAC) Responder for Increased Battery Pack
    Security
    • Split Key (2 × 64) Stored in Secure Memory
  • Programmable Protection Levels for:
    • Overcurrent in Discharge
    • Short-Circuit Current in Charge
    • Short-Circuit Current in Discharge
    • Overvoltage
    • Undervoltage
    • Overtemperature
  • Supports a 1-mΩ to 3-mΩ Current Sense Resistor
  • Compact 12-Terminal SON Package (DRZ)

The bq78z100 device provides a fully integrated pack-based solution with a flash programmable custom reduced instruction-set CPU (RISC), safety protection, and authentication for 1-series to 2-series cell Li-Ion and Li-Polymer battery packs.

The bq78z100 gas gauge communicates via an I2C-compatible interface or single-wire HDQ interface and combines an ultra-low-power, high-speed TI bqBMP processor, high-accuracy analog measurement capabilities, integrated flash memory, an array of peripheral and communication ports, an N-channel FET drive, and a SHA-1 Authentication transform responder into a complete, high-performance battery management solution.

The bq78z100 device provides an array of battery and system safety functions, including overcurrent in discharge, short circuit in charge, and short circuit in discharge protection for the battery, as well as FET protection for the N-channel FETs, internal AFE watchdog, and cell balancing. Through firmware, the devices can provide a larger array of features including protection against overvoltage, undervoltage, overtemperature, and more.

The bq78z100 device provides a fully integrated pack-based solution with a flash programmable custom reduced instruction-set CPU (RISC), safety protection, and authentication for 1-series to 2-series cell Li-Ion and Li-Polymer battery packs.

The bq78z100 gas gauge communicates via an I2C-compatible interface or single-wire HDQ interface and combines an ultra-low-power, high-speed TI bqBMP processor, high-accuracy analog measurement capabilities, integrated flash memory, an array of peripheral and communication ports, an N-channel FET drive, and a SHA-1 Authentication transform responder into a complete, high-performance battery management solution.

The bq78z100 device provides an array of battery and system safety functions, including overcurrent in discharge, short circuit in charge, and short circuit in discharge protection for the battery, as well as FET protection for the N-channel FETs, internal AFE watchdog, and cell balancing. Through firmware, the devices can provide a larger array of features including protection against overvoltage, undervoltage, overtemperature, and more.

Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 5
Type Title Date
* Data sheet bq78z100 Impedance Track Gas Gauge for 1-Series to 2-Series Li-Ion/Li-Polymer Battery Packs datasheet 14 Sep 2015
* User guide bq78z100 Technical Reference Manual (Rev. A) 15 Sep 2016
Application note How to complete a successful learning cycle for the bq28z610/bq78z100 23 Jun 2016
Technical article Design a battery fuel gauge for 2S battery packs 12 Mar 2016
User guide bq78z100EVM 1s-2s Li-ion Battery Pack Manager Evaluation Module 14 Sep 2015

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

BQ78Z100EVM-532 — bq78z100EVM 1s-2s Li-ion Battery Pack Manager Evaluation Module

The bq78z100EVM-532 evaluation module (EVM) is a complete evaluation system for the bq78z100 or bq294502 battery management system. The EVM includes one bq78z100 and bq294502 circuit module and a link to Windows™ based PC software. The circuit module includes one bq78z100  integrated (...)

In stock
Limit: 3
Firmware

BQ78Z100 Firmware version 0.05 (Rev. A)

SLUC601A.ZIP (4215 KB)
Reference designs

TIDA-00884 — 1 to 2s HDQ Li-Ion Battery Pack Manager Reference Design

The Texas Instruments bq78z100 device is a Battery Pack Manager that integrates gas gauging, and protection for complete autonomous operation of 1-series to 2-series cell Li-Ion and Li-Polymer battery packs. The architecture enables communication between the fuel gauging processor and an external (...)
Package Pins Download
SON (DRZ) 12 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos