2.4 GHz range extender
Product details
Parameters
We are not able to display this information. Please refer to the product data sheet.Features
- Seamless Interface to 2.4-GHz Low-Power RF Devices from Texas Instruments
- Output Power up to 22 dBm
- Few External Components
- Integrated Switches
- Integrated Matching Network
- Integrated Balun
- Integrated Inductors
- Integrated PA
- Integrated LNA
- Digital Control of LNA Gain by HGM Pin
- 100-nA in Power Down (EN = PAEN = 0)
- Low Transmit Current Consumption
(100 mA at 3 V for 20-dBm Out, PAE = 33%) - Low-Receive Current Consumption
- 3.4 mA for High-Gain Mode
- 1.7 mA for Low-Gain Mode
- 4.8-dB LNA Noise Figure, Including T/R Switch and External Antenna Match
- RoHS Compliant 4×4-mm QFN-16 Package
- 2-V to 3.6-V Operation
Description
CC2591 is a cost-effective and high-performance RF front end for low-power and low-voltage 2.4-GHz wireless applications. The device is a range extender for all existing and future 2.4-GHz low-power RF transceivers, transmitters, and System-on-Chip products from TI. CC2591 increases the link budget by providing a power amplifier for increased output power, and an LNA with low noise figure for improved receiver sensitivity. The device provides a small size, high output power RF design with its 4-mm × 4-mm QFN-16 package. The device contains PA, LNA, switches, RF-matching, and balun for simple design of high-performance wireless applications.
Technical documentation
Design & development
For additional terms or required resources, click any title below to view the detail page where available.Hardware development
Description
Features
- 12.7 x 25.4 x 3.7 mm compact shielded module for SMD mounting
- 169 MHz – 2.4 GHz frequency bands
- Pre-certified for global operation
- Supporting software and development tools available
- Extensive, high quality support documentation
- Reduce time-to-market and cost of design
- Turn-key design and customization of (...)
Description
The CC2520EMK is an ad-on development kit for CC2520DK. The full stand-alone development kit is CC2520DK. The CC2520EMK development kit consists of 2 CC2520EM plug in modules and 2 antennas. The CC2520EMK is only usable together with a motherboard/host board, typically the SmartRF05EB and (...)
Features
Can be used with 802.15.4 TIMAC, SimpliciTI, and ZigBee software or for proprietary 802.15.4 applications.
Software development
Small RF networks (...)
Features
- Low power - A TI proprietary low-power network protocol
- Flexible:
- Direct device-to-device communication
- Simple star with access point for store and forward to end device
- Range extenders to increase range to 4 hops
- Simple - Utilizes a 5 command API
- Low data rate and low duty cycle
- Ease-of-use
- Application (...)
To download the free tools download click the "Get Software" button above. By subscribing, we will be able to notify you of updates when they become available and provide instructions on how to perform the update.
Features
- Support for IEEE 802.15.4-2006
- Multiple Platforms: CC2630, CC2538, CC2530 and CC2531 wireless MCUs, CC2592 and CC2590 range extenders
- Star topology: point-to-point, one-to-many and data concentrator
- Synchronous (beacon) and asynchronous (non-beacon) modes
- Network security features
- Co-processor (...)
Design tools & simulation
Features
- Modules listed are based on TI wireless technology supporting Wi-Fi®, Bluetooth®, Zigbee®, Sub-1 GHz, Sigfox, 2.4 GHz, multi-band connectivity and more
- Modules integrate clocks, SPI flash and passive components
- Listings included for hardware customization, software integration and cloud services
- Listings (...)
Reference designs
The reference design demonstrates how to integrate CC2530/CC2531 and CC2591, and shows good techniques for decoupling and RF layout (...)
Design files
CAD/CAE symbols
| Package | Pins | Download |
|---|---|---|
| VQFN (RGV) | 16 | View options |
Ordering & quality
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.