Top

Product details

Parameters

Protocols Bluetooth 5.1, Zigbee 2.6, 6LoWPAN Features LE 1M PHY, LE 2M PHY, LE Coded PHY (long range) Flash (KB) 128 CPU core Arm Cortex-M3 Type Wireless MCU RAM (KB) 20 GPIO 10, 15, 31 Peripherals 2 SPI, UART, I2C, I2S, 12-bit ADC 8-channel, 4 timers, Sensor controller Security Device identity, Debug security, Secure boot, Secure firmware and software update, Crypto acceleration (RNG, AES) Sensitivity (best) (dBm) -97 Operating temperature range (C) -40 to 85 Rating Catalog open-in-new Find other Bluetooth products

Package | Pins | Size

VQFN (RGZ) 48 49 mm² 7 x 7 VQFN (RHB) 32 25 mm² 5 x 5 VQFN (RSM) 32 16 mm² 4 x 4 open-in-new Find other Bluetooth products

Features

  • Microcontroller
    • Powerful ARM® Cortex®-M3
    • EEMBC CoreMark® Score: 142
    • Up to 48-MHz Clock Speed
    • 128KB of In-System Programmable Flash
    • 8KB of SRAM for Cache
    • 20KB of Ultralow-Leakage SRAM
    • 2-Pin cJTAG and JTAG Debugging
    • Supports Over-The-Air Upgrade (OTA)
  • Ultralow-Power Sensor Controller
    • Can Run Autonomous From the Rest of the System
    • 16-Bit Architecture
    • 2KB of Ultralow-Leakage SRAM for Code and Data
  • Efficient Code Size Architecture, Placing Drivers, Bluetooth® Low Energy Controller, IEEE 802.15.4 MAC, and Bootloader in ROM
  • RoHS-Compliant Packages
    • 4-mm × 4-mm RSM VQFN32 (10 GPIOs)
    • 5-mm × 5-mm RHB VQFN32 (15 GPIOs)
    • 7-mm × 7-mm RGZ VQFN48 (31 GPIOs)
  • Peripherals
    • All Digital Peripheral Pins Can Be Routed to Any GPIO
    • Four General-Purpose Timer Modules
      (Eight 16-Bit or Four 32-Bit Timers, PWM Each)
    • 12-Bit ADC, 200-ksamples/s, 8-Channel Analog MUX
    • Continuous Time Comparator
    • Ultralow-Power Analog Comparator
    • Programmable Current Source
    • UART
    • 2× SSI (SPI, MICROWIRE, TI)
    • I2C
    • I2S
    • Real-Time Clock (RTC)
    • AES-128 Security Module
    • True Random Number Generator (TRNG)
    • 10, 15, or 31 GPIOs, Depending on Package Option
    • Support for Eight Capacitive-Sensing Buttons
    • Integrated Temperature Sensor
  • External System
    • On-Chip internal DC-DC Converter
    • Very Few External Components
    • Seamless Integration With the SimpleLink™ CC2590 and CC2592 Range Extenders
    • Pin Compatible With the SimpleLink CC13xx in 4-mm × 4-mm and 5-mm × 5-mm VQFN Packages
  • Low Power
    • Wide Supply Voltage Range
      • Normal Operation: 1.8 to 3.8 V
      • External Regulator Mode: 1.7 to 1.95 V
    • Active-Mode RX: 5.9 mA
    • Active-Mode TX at 0 dBm: 6.1 mA
    • Active-Mode TX at +5 dBm: 9.1 mA
    • Active-Mode MCU: 61 µA/MHz
    • Active-Mode MCU: 48.5 CoreMark/mA
    • Active-Mode Sensor Controller: 8.2 µA/MHz
    • Standby: 1 µA (RTC Running and RAM/CPU Retention)
    • Shutdown: 100 nA (Wake Up on External Events)
  • RF Section
    • 2.4-GHz RF Transceiver Compatible With Bluetooth Low Energy (BLE) 4.2 Specification and IEEE 802.15.4 PHY and MAC
    • Excellent Receiver Sensitivity (–97 dBm for BLE and –100 dBm for 802.15.4), Selectivity, and Blocking Performance
    • Link budget of 102 dB/105 dB (BLE/802.15.4)
    • Programmable Output Power up to +5 dBm
    • Single-Ended or Differential RF Interface
    • Suitable for Systems Targeting Compliance With Worldwide Radio Frequency Regulations
      • ETSI EN 300 328 (Europe)
      • EN 300 440 Class 2 (Europe)
      • FCC CFR47 Part 15 (US)
      • ARIB STD-T66 (Japan)
  • Tools and Development Environment
    • Full-Feature and Low-Cost Development Kits
    • Multiple Reference Designs for Different RF Configurations
    • Packet Sniffer PC Software
    • Sensor Controller Studio
    • SmartRF™ Studio
    • SmartRF Flash Programmer 2
    • IAR Embedded Workbench® for ARM
    • Code Composer Studio™

All trademarks are the property of their respective owners.

open-in-new Find other Bluetooth products

Description

The CC2650 device is a wireless MCU targeting Bluetooth, ZigBee® and 6LoWPAN, and ZigBee RF4CE remote control applications.

The device is a member of the CC26xx family of cost-effective, ultralow power, 2.4-GHz RF devices. Very low active RF and MCU current and low-power mode current consumption provide excellent battery lifetime and allow for operation on small coin cell batteries and in energy-harvesting applications.

The CC2650 device contains a 32-bit ARM Cortex-M3 processor that runs at 48 MHz as the main processor and a rich peripheral feature set that includes a unique ultralow power sensor controller. This sensor controller is ideal for interfacing external sensors and for collecting analog and digital data autonomously while the rest of the system is in sleep mode. Thus, the CC2650 device is ideal for applications within a whole range of products including industrial, consumer electronics, and medical.

The Bluetooth Low Energy controller and the IEEE 802.15.4 MAC are embedded into ROM and are partly running on a separate ARM Cortex-M0 processor. This architecture improves overall system performance and power consumption and frees up flash memory for the application.

The Bluetooth and ZigBee stacks are available free of charge from www.ti.com.

open-in-new Find other Bluetooth products
Download
Similar products you might be interested in
open-in-new Compare products
Similar but not functionally equivalent to the compared device:
CC1352R ACTIVE SimpleLink™ 32-bit Arm Cortex-M4F multiprotocol Sub 1 GHz & 2.4 GHz wireless MCU with 352kB Flash This product has more available flash memory and supports dual-band radio operation with quarterly software updates (including Zigbee, 15.4, & BLE).
CC2652P ACTIVE SimpleLink™ Arm Cortex-M4F multiprotocol 2.4 GHz wireless MCU with integrated power amplifier This product has more available flash memory, supports DMM concurrency, and +20 dBm TX output power with quarterly software updates (Zigbee, 15.4, & BLE).
CC2652R ACTIVE SimpleLink™ 32-bit Arm Cortex-M4F multiprotocol 2.4 GHz wireless MCU with 352kB Flash This product offers an Arm Cortex-M4F, higher flash (352KB), and higher RAM (80KB).
NEW CC2652RB ACTIVE SimpleLink™ 32-bit Arm Cortex-M4F multiprotocol 2.4 GHz wireless MCU with crystal-less BAW resonator This product offers an Arm Cortex-M4F, higher flash (352KB), higher RAM (80KB), and an integrated BAW resonator.

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 44
Type Title Date
* Datasheet CC2650 SimpleLink™ Multistandard Wireless MCU datasheet (Rev. B) Jul. 19, 2016
* Errata CC2650 SimpleLink™ Multistandard Wireless MCU Errata Sep. 07, 2018
* User guide CC13x0, CC26x0 SimpleLink™ Wireless MCU Technical Reference Manual (Rev. I) Jun. 30, 2020
Application note Bluetooth® Low Energy – Missing Length Check for UNPI Packets Over SPI Oct. 08, 2020
Application note How to Certify Your Bluetooth Product (Rev. D) Sep. 10, 2020
Application note CC13xx/CC26xx Hardware Configuration and PCB Design Considerations (Rev. E) Jun. 19, 2020
Application note Hardware Migration From CC26x0 to CC26x2R (Rev. C) Jun. 19, 2020
Application note Variable Time Tag Comparison on SimpleLink™ Devices Jun. 05, 2020
Application note Crystal Oscillator and Crystal Selection for the CC26xx and CC13xx Wireless MCUs (Rev. H) May 29, 2020
Application note Bluetooth Low Energy, Basic Rate/Enhanced Data Rate – Method Confusion Pairing V May 18, 2020
Application note CE Regulations for SRDs Operating in License-Free 2.4GHz/5GHz Bands-WiFi Devices Apr. 15, 2020
Application note CC2538/CC26x0/CC26x2 Serial Bootloader Interface (Rev. C) Jan. 27, 2020
Application note Running Bluetooth® Low Energy on CC2640 Without 32 kHz Crystal (Rev. C) Sep. 23, 2019
Technical articles Bluetooth® Low Energy shifts gears for car access Jul. 15, 2019
Technical articles Top 3 design challenges that the new generation of SimpleLink™ Wi-Fi® devices will help you overcome Feb. 21, 2019
User guide SimpleLink SDK Power Management: MSP432, MSP432E4, CC13xx/CC26xx, and CC32xx (Rev. J) Jan. 29, 2019
Application note Measuring CC13xx and CC26xx current consumption (Rev. D) Jan. 10, 2019
Technical articles Exploring the impact of IoT on innovation Jul. 17, 2018
Technical articles An out-of-the-box Internet of Things: building a seamless and secure smart home network Jun. 12, 2018
Application note Debugging Communication Range Mar. 27, 2018
User guide CC2640/CC2650 Bluetooth low energy Software Developer’s Guide (Rev. E) Mar. 14, 2018
Application note Integrating Sensor Controller Studio Examples Into ProjectZero Jan. 08, 2018
Application note Network Algorithms for LPWAN Technical Brief Nov. 13, 2017
Application note CC-Antenna-DK2 and Antenna Measurements Summary (Rev. A) Oct. 02, 2017
Application note Design Considerations for High Temperature Applications Using the CC2640R2F-Q1 Aug. 15, 2017
Application note Johanson Balun for the CC26xx Device Family Aug. 07, 2017
User guide CC26x0/CC13x0 SimpleLink™ Wireless MCU Power Management Software Development Ref (Rev. A) Apr. 17, 2017
Application note ETSI EN 300 328 Blocking Test for Bluetooth Low Energy Feb. 08, 2017
Application note Configuring the CC2640 for Bluetooth® Direct Test Mode Dec. 06, 2016
More literature SimpleLink Ultra-low power wireless microcontroller platform (Rev. B) Oct. 28, 2016
Application note Implementing Eddystone Bluetooth Smart Beacons Using the TI BLE-Stack (Rev. A) Oct. 19, 2016
White paper Bringing Wireless Scalability to Intelligent Sensing Applications (Rev. B) Aug. 25, 2016
User guide TI-RTOS 2.20 for CC13xx/CC26xx SimpleLink Getting Started Guide (Rev. D) Jun. 17, 2016
Application note Voice Over Remote Control May 19, 2016
More literature Allegion Case Study (Rev. A) Apr. 12, 2016
White paper A guide to SensorTag Hackathons: Resources Mar. 08, 2016
More literature CC2650RC Quick Start User's Guide Mar. 08, 2016
Application note Using the Wireless SimpleLink CC26xx in Ext Regulator Mode With the TPS62740 Nov. 19, 2015
More literature SimpleLink CC2650 Evaluation Module Kit Quick Start Guide Nov. 05, 2015
Application note CC2640 Wireless MCU DC Supply Evaluation Oct. 05, 2015
E-book Understanding Wireless Connectivity in the Industrial IoT Jul. 22, 2015
Application note Using GCC/GDB With SimpleLink CC26xx Feb. 23, 2015
More literature SimpleLink Bluetooth Smart CC2640 Wireless Microcontroller Feb. 10, 2015
More literature SimpleLink CC2650 Development Kit Quick Start Guide Jan. 12, 2015

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
29
Description

The SimpleLink™ Bluetooth® low energy CC2650 Module BoosterPack plug-in module is the quick and easy way to add Bluetooth low energy to your LaunchPad™ development kit. Simply plug the CC2650 module BoosterPack kit into the MSP432™ microcontroller (MCU) LaunchPad kit to get started! The software (...)

Features
  • Bluetooth low energy module BoosterPack kit using the CC2650 Module with integrated antenna
  • Includes software examples for MSP432 MCU as application processor
  • Pre-certified for FCC/IC, CE, and ARIB radio standards
  • Debug interface for development of any Bluetooth low energy application on module
  • Bluetooth (...)
DAUGHTER CARD Download
99
Description

The SimpleLink™ CC2650 evaluation module kit is an add-on kit for the SMARTRF06EBK evaluation board kit. The CC2650 device included in this kit is the superset device of the SimpleLink ultra-low power wireless MCU platform, so it can also be used to evaluate the SimpleLink Bluetooth® Smart CC2640 (...)

DEBUG PROBE Download
15
Description

The Debugger DevPack adds debug capability to your SensorTag. Plug it into the SensorTag DevPack expansion header and debug your SensorTag with Code Composer Studio or IAR ARM development environments. The Debugger DevPack includes a FREE license of Code Composer Studio that is tied to the DevPack.

(...)

DEBUG PROBE Download
149
Description

The Texas Instruments XDS110 EnergyTrace™ High Dynamic Range (ETHDR) is an accessory to the XDS110 Debug Probe (emulator) that increases the Dynamic Range of the Energy Trace feature. This allows performing very accurate power consumption measurements on all Simplelink Wireless MCUs while (...)

Features

The Texas Instruments XDS110 EnergyTrace™ High Dynamic Range (ETHDR) is the first accessory to the XDS110 Debug Probe (emulator). Designed to be a complete plug-in solution that brings EnergyTrace to the higher power wireless connectivity systems, it features an improved range, resolution and (...)

DEBUG PROBE Download
XDS200 USB Debug Probe
TMDSEMU200-U
295
Description

The Spectrum Digital XDS200 is the first model of the XDS200 family of debug probes (emulators) for TI processors. The XDS200 family features a balance of low cost with good performance between the super low cost XDS110 and the high performance XDS560v2, while supporting a wide variety of standards (...)

Features

The XDS200 is the mid-range family of JTAG debug probes (emulators) for TI processors. Designed to deliver good performance and the most common features that place it between the low cost XDS110 and the high performance XDS560v2, the XDS200 is the balanced solution to debug TI microcontrollers (...)

DEVELOPMENT KIT Download
74.99
Description

This new antenna kit allows you to do real-life testing to find the optimal antenna for your application! The antenna kit includes 16 antennas for frequencies from 169MHz to 2.4GHz including PCB antennas, Helical antennas and Chip antennas as well as dual band band antennas for 868/915MHz combined (...)

Features
  • 16 Antennas for 169MHz, 315MHz, 433MHz, 868MHz, 915MHz, 2.4GHz
  • Compatible with LaunchPad and SensorTag
  • Includes everything needed for real-life testing of antennas
DEVELOPMENT KIT Download
59
Description
The new SensorTag IoT kit invites you to realize your cloud-connected product idea. The new SensorTag now includes 10 low-power MEMS sensors in a tiny red package. And it is expandable with DevPacks to make it easy to add your own sensors or actuators.

 

Connect to the cloud with Bluetooth low energy (...)

Features
  • More sensors!
    • Adds support for more low power sensors
    • 10 sensors including support for light, digital microphone, magnetic sensor, humidity, pressure, accelerometer, gyroscope, magnetometer, object temperature, and ambient temperature
  • Lower power
    • Longer battery life from your coin cell and enabler of (...)
DEVELOPMENT KIT Download
29
Description
NOTE: The CC2650 LaunchPad kit supports evaluation of:
  • CC2640 Bluetooth® low energy wireless MCU
  • CC2630 ZigBee/6LoWPAN wireless MCU
  • CC2620 ZigBee RF4CE wireless MCU
  • CC2650 Multi-standard wireless MCU

Take your LaunchPad™ development kit to the cloud with the SimpleLink™ CC2650 wireless (...)

Features
  • Connect your LaunchPad kit to the cloud with Bluetooth low energy on your smartphone
  • Access all I/O signals with the BoosterPack plug-in modules I/O interface
  • On-board emulator with a USB serial port gets you started with instant code development
  • Upgrade the LaunchPad kit firmware over-the-air from the (...)

Software development

DRIVER OR LIBRARY Download
Bluetooth Low Energy software stack
BLE-STACK This royalty-free BLE-Stack for TI’s SimpleLink™ Bluetooth® Low Energy family of ARM® Cortex®-M3 based wireless microcontrollers (MCUs) includes full-featured Bluetooth 4.2 and Bluetooth 5 certified stacks with all necessary software, sample applications and documentation to (...)
DRIVER OR LIBRARY Download
IEEE802.15.4 Medium Access control (MAC) software stack
TIMAC TIMAC - IEEE802.15.4 Medium Access Control (MAC) Software Stack

To download the free tools download click the "Get Software" button above. By subscribing, we will be able to notify you of updates when they become available and provide instructions on how to perform the update.

Features
  • Support for IEEE 802.15.4-2006
  • Multiple Platforms: CC2630, CC2538, CC2530 and CC2531 wireless MCUs, CC2592 and CC2590 range extenders
  • Star topology: point-to-point, one-to-many and data concentrator
  • Synchronous (beacon) and asynchronous (non-beacon) modes
  • Network security features
  • Co-processor (...)
FIRMWARE Download
SPRCAG5.ZIP (512 KB)
IDE, CONFIGURATION, COMPILER OR DEBUGGER Download
Code Composer Studio™ integrated development environment (IDE) for wireless connectivity
CCSTUDIO-WCS Code Composer Studio is an integrated development environment (IDE) that supports TI's Microcontroller and Embedded Processors portfolio. Code Composer Studio comprises a suite of tools used to develop and debug embedded applications. It includes an optimizing C/C++ compiler, source code editor (...)
IDE, CONFIGURATION, COMPILER OR DEBUGGER Download
Sensor Controller Studio
SENSOR-CONTROLLER-STUDIO Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow (...)
Features
  • Includes ready to use examples for several common use-cases
  • Full toolchain with built-in compiler and assembler for programming in a C-like programming language
  • Provides rapid development by using the integrated sensor controller task testing and debugging functionality including visualization of (...)
PLUG-IN Download
Bluetooth plug-in for the SimpleLink™ MSP432 SDK
SIMPLELINK-SDK-BLUETOOTH-PLUGIN The SimpleLink™ SDK Bluetooth Plugin is a companion software package that enables the use of a Bluetooth Network Processor (NWP) on a Host SimpleLink platform. This software package supports the MSP432P4, MSP432E4, and CC32xx devices as Host platforms, and the CC2650MODA, CC2640, and CC26x2R1 as (...)
Features
  • Wide-ranging demo suite that showcases software features and demonstrates BLE functionality
  • Power management capability to enable low power or regular power modes
  • Comprehensive documentation and examples for each software components including software API Guides and User's Guides
  • GAP Central Role (...)
SOFTWARE PROGRAMMING TOOL Download
SmartRF Flash Programmer
FLASH-PROGRAMMER SmartRF Flash Programmer 2 can be used to program the flash memory in Texas Instruments ARM based low-power RF wireless MCUs over the debug and serial interfaces.

SmartRF Flash Programmer can be used to program the flash memory in Texas Instruments 8051-based low-power RF wireless MCUs and for (...)

Features
  • Programming of SW images on low-power RF wireless MCUs
  • Programming/updating firmware and bootloader on the Evaluation Boards' USB MCU
  • Append software image to existing software on device
  • Read out software image from device into binary, hex or ELF files (elf and bin for ARM-devices only)
  • Verify software (...)
SOFTWARE PROGRAMMING TOOL Download
UniFlash stand-alone flash tool for microcontrollers, Sitara™; processors and SimpleLink™
UNIFLASH Supported devices: CC13xx, CC25xx, CC26xx, CC3x20, CC3x30, CC3x35, Tiva, C2000, MSP43x, Hercules, PGA9xx, IWR12xx, IWR14xx, IWR16xx, IWR18xx , IWR68xx, AWR12xx, AWR14xx, AWR16xx, AWR18xx.  Command line only: AM335x, AM437x, AM571x, AM572x, AM574x, AM65XX, K2G

CCS Uniflash is a standalone tool used to (...)

SUPPORT SOFTWARE Download
SimpleLink™ SensorTag Software
SENSORTAG-SW The SensorTag includes an open hardware and software reference design for low cost and low power wireless IoT applications. The SensorTag is supplied with complete source code with everything you need to customize it for your application as well as source code examples for mobile apps.
SUPPORT SOFTWARE Download
SWRC258Q.ZIP (34446 KB)

Design tools & simulation

CALCULATION TOOL Download
Third party wireless module search tool
3P-WIRELESS-MODULES The third party wireless module search tool helps developers to identify products that meet their end equipment specifications and procure production ready wireless modules. The third party module vendors included in the search tool are independent third party companies with expertise in designing (...)
Features
  • Modules listed are based on TI wireless technology supporting Wi-Fi®, Bluetooth®, Zigbee®, Sub-1 GHz, Sigfox, 2.4 GHz, multi-band connectivity and more
  • Modules integrate clocks, SPI flash and passive components
  • Listings included for hardware customization, software integration and cloud services
  • Listings (...)
CALCULATION TOOL Download
Bluetooth Power Calculator Tool
BT-POWER-CALC — This tool is used to calculate Bluetooth Low Energy power consumption estimates for various use cases on TI Bluetooth devices. The calculator includes both advertising and peripheral use cases with the ability to configure different use case profile parameters. The calculator outputs an estimate of (...)
Features
  • Battery life estimator
  • Use-case profile configurability
CALCULATION TOOL Download
SmartRF Protocol Packet Sniffer
PACKET-SNIFFER The SmartRF Packet Sniffer is a PC software application that can display and store radio packets captured by a listening RF device. The capture device is connected to the PC via USB. Various RF protocols are supported. The Packet Sniffer filters and decodes packets and displays them in a convenient (...)
CALCULATION TOOL Download
TI RF Range Estimator
RF-RANGE-ESTIMATOR — This tool is used to complete a range estimate for indoor and outdoor RF links using TI wireless devices. The outdoor calculation is based upon Line-of-Sight (LOS). For the indoor estimation, construction materials can be selected that are between the Tx and Rx unit. The greater the attenuation of (...)
Features
  • Range estimate spreadsheet for Sub-1 GHz and 2.4 GHz devices
  • Range debug checklist
CALCULATION TOOL Download
SmartRF Studio
SMARTRFTM-STUDIO SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
Features
  • Link tests. Send and Receive packets between nodes.
  • Antenna and radiation tests. Set the radio in continuous wave TX and RX states.
  • A set of recommended/typical register settings for all devices.
  • Read and write individual RF registers.
  • Execute individual commands to control the radio.
  • Detailed (...)
DESIGN TOOL Download
Hardware design reviews for SimpleLink™ CC2xxx devices
SIMPLELINK-2-4GHZ-DESIGN-REVIEWS The SimpleLink hardware design review process provides a way to get in touch, one-on-one, with a subject matter expert that can help review your design and provide valuable feedback. A simple 3-step process for requesting a review as well as links to relevant technical documentation and resources (...)
SCHEMATIC Download
SPRR233.PDF (1366 KB)
SCHEMATIC Download
SWRR147A.ZIP (3532 KB)
GERBER FILE Download
SWRC298.ZIP (1803 KB)
GERBER FILE Download
SWRC299.ZIP (1738 KB)
GERBER FILE Download
SWRC300.ZIP (1810 KB)
GERBER FILE Download
SWRC301.ZIP (2184 KB)
GERBER FILE Download
SWRC302.ZIP (1907 KB)
GERBER FILE Download
SWRC303.ZIP (1478 KB)
GERBER FILE Download
SWRC326.ZIP (351 KB)
PCB LAYOUT Download
SPRR232.ZIP (3083 KB)

Reference designs

Many TI reference designs include the CC2650 Use our reference design selection tool to review and identify designs that best match your application and parameters.

CAD/CAE symbols

Package Pins Download
VQFN (RGZ) 48 View options
VQFN (RHB) 32 View options
VQFN (RSM) 32 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos