Top

Product details

Parameters

Protocols Bluetooth Low Energy 5.2, Thread, Zigbee 3.0 RAM (KB) 88 Type Wireless MCU Features LE 1M PHY, LE 2M PHY, LE Coded PHY (long range), Direction finding, Bluetooth mesh, ZigBee Cordinator, ZigBee Network Processor, Sleepy end device, Border router, OAD GPIO 26 Peripherals 2 SPI, 2 UART, I2C, I2S, 12-bit ADC 8-channel, 8-bit DAC, 2 comparators, Sensor controller, 4 timers Security Device identity, Debug security, Secure boot, Secure firmware and software update, Crypto acceleration (RNG, AES, SHA, ECC) Sensitivity (best) (dBm) -105 Operating temperature range (C) -40 to 85 Rating Catalog open-in-new Find other Multi-protocol products

Package | Pins | Size

VQFN (RGZ) 48 49 mm² 7 x 7 open-in-new Find other Multi-protocol products

Features

  • Microcontroller
    • Powerful 48-MHz Arm Cortex-M4F processor
    • EEMBC CoreMark score: 148
    • 352KB of in-system programmable flash
    • 256KB of ROM for protocols and library functions
    • 8KB of cache SRAM (alternatively available as general-purpose RAM)
    • 80KB of ultra-low leakage SRAM. The SRAM is protected by parity to ensure high reliability of operation.
    • 2-pin cJTAG and JTAG debugging
    • Supports over-the-air (OTA) update
  • Ultra-low power sensor controller with 4KB of SRAM
    • Sample, store, and process sensor data
    • Operation independent from system CPU
    • Fast wake-up for low-power operation
  • TI-RTOS, drivers, bootloader, Bluetooth 5.2 low energy controller, and IEEE 802.15.4 MAC in ROM for optimized application size
  • RoHS-compliant package
    • 7-mm × 7-mm RGZ VQFN48 (26 GPIOs)
  • Peripherals
    • Digital peripherals can be routed to any GPIO
    • 4× 32-bit or 8× 16-bit general-purpose timers
    • 12-bit ADC, 200 kSamples/s, 8 channels
    • 2× comparators with internal reference DAC (1× continuous time, 1× ultra-low power)
    • Programmable current source
    • 2× UART
    • 2× SSI (SPI, MICROWIRE, TI)
    • I2C and I2S
    • Real-time clock (RTC)
    • AES 128- and 256-bit cryptographic accelerator
    • ECC and RSA public key hardware accelerator
    • SHA2 accelerator (full suite up to SHA-512)
    • True random number generator (TRNG)
    • Capacitive sensing, up to 8 channels
    • Integrated temperature and battery monitor
  • External system
    • On-chip buck DC/DC converter
  • Low power
    • Active mode RX: 6.9 mA
    • Active mode TX 0 dBm: 7.3 mA
    • Active mode TX 5 dBm: 9.6 mA
    • Active mode TX at +10 dBm: 22 mA
    • Active mode TX at +20 dBm: 85 mA
    • Active mode MCU 48 MHz (CoreMark): 3.4 mA (71 µA/MHz)
    • Sensor controller, low power-mode, 2 MHz, running infinite loop: 30.1 µA
    • Sensor controller, active mode, 24 MHz, running infinite loop: 808 µA
    • Standby: 0.94 µA (RTC on, 80KB RAM and CPU retention)
    • Shutdown: 150 nA (wakeup on external events)
  • Radio section
    • 2.4 GHz RF transceiver compatible with Bluetooth 5.2 Low Energy and earlier LE specifications and IEEE 802.15.4 PHY and MAC
    • 3-wire, 2-wire, 1-wire PTA coexistence mechanisms
    • Excellent receiver sensitivity: -100 dBm for 802.15.4 (2.4 GHz), -105 dBm for Bluetooth 125-kbps (LE Coded PHY)
    • Output power up to +20 dBm with temperature compensation
    • Suitable for systems targeting compliance with worldwide radio frequency regulations
      • EN 300 328, (Europe)
      • EN 300 440 Category 2
      • FCC CFR47 Part 15
      • ARIB STD-T66 (Japan)
  • Wireless protocols
    • Thread, Zigbee , Bluetooth 5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), proprietary systems, SimpleLink™ TI 15.4 stack (2.4 GHz), and dynamic multiprotocol manager (DMM) driver.
  • Development Tools and Software

All trademarks are the property of their respective owners.

open-in-new Find other Multi-protocol products

Description

The SimpleLink™CC2652P device is a multiprotocol 2.4 GHz wireless microcontroller (MCU) supporting Thread, Zigbee , Bluetooth 5.2 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), proprietary systems, including the TI 15.4-Stack (2.4 GHz), and concurrent multiprotocol through a Dynamic Multiprotocol Manager (DMM) driver. The device is optimized for low-power wireless communication and advanced sensing in building security systems, HVAC, medical, wired networking, portable electronics, home theater & entertainment, and connected peripherals markets. The highlighted features of this device include:

  • Wide flexibility of protocol stack support in the SimpleLink™ CC13x2 and CC26x2 Software Development Kit (SDK).
  • Enable long-range and low-power applications using integrated +20 dBm high-power amplifier with best-in-class transmit current consumption at 85 mA.
  • Coin-cell operation at +10 dBm with transmit current consumption of 22 mA.
  • Longer battery life wireless applications with low standby current of 0.94 µA with full RAM retention.
  • Industrial temperature ready with lowest standby current of 5 µA at 85°C.
  • Advanced sensing with a programmable, autonomous ultra-low power Sensor Controller CPU with fast wake-up capability. As an example, the sensor controller is capable of 1-Hz ADC sampling at 1 µA system current.
  • Low SER (Soft Error Rate) FIT (Failure-in-time) for long operation lifetime with no disruption for industrial markets with always-on SRAM parity against corruption due to potential radiation events.
  • Dedicated software controlled radio controller (Arm® Cortex®-M0) providing flexible low-power RF transceiver capability to support multiple physical layers and RF standards.
  • Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth ® Low Energy (-105 dBm for 125-kbps LE Coded PHY).

The CC2652P device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi, Bluetooth Low Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use development environment with a single core software development kit (SDK) and rich tool set. A one-time integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements change. For more information, visit SimpleLink™ MCU platform.

open-in-new Find other Multi-protocol products
Download
Similar products you might be interested in
open-in-new Compare products
Pin-for-pin with same functionality to the compared device.
CC2652R ACTIVE SimpleLink™ 32-bit Arm Cortex-M4F multiprotocol 2.4 GHz wireless MCU with 352kB Flash This product does not have integrated power amplifer (+20-dBm output power).
CC2652RB ACTIVE SimpleLink™ 32-bit Arm Cortex-M4F multiprotocol 2.4 GHz wireless MCU with crystal-less BAW resonator This product helps lower the system price with an integrated BAW resonator and removes the integrated power amplifer.

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 37
Type Title Date
* Data sheet CC2652P SimpleLink™ Multiprotocol 2.4 GHz Wireless MCU With Integrated Power Amplifier datasheet (Rev. B) Feb. 16, 2021
* Errata CC2652P SimpleLink™ Wireless MCU Device Revision E Silicon Errata Oct. 29, 2019
* User guide CC13x2, CC26x2 SimpleLink™ Wireless MCU Technical Reference Manual (Rev. D) Sep. 30, 2019
Technical article Seamlessly connect your world with 16 new wireless MCUs for the 2.4-GHz and Sub-1-GHz bands Jun. 04, 2021
Selection guide Wireless Connectivity Technology Selection Guide (Rev. A) May 27, 2021
Application note Dynamic Multi-protocol Manager (DMM) Tech Note (Rev. A) May 13, 2021
Technical article An FAQ about the Matter connectivity standard May 11, 2021
White paper Dynamic Multi-Protocol (DMM) Performance Apr. 21, 2021
White paper Exploring Thread and Zigbee for home and building automation Apr. 12, 2021
Application note How to Certify Your Bluetooth Product (Rev. F) Jan. 28, 2021
Application note Optimizing the SimpleLink CC1352P for Coin Cell Operation at 10 dBm Output Power (Rev. C) Dec. 08, 2020
Technical article How TI helps expand connectivity beyond the front door with Amazon Sidewalk Sep. 21, 2020
Technical article Back to basics: Exploring the benefits of affordable Bluetooth® Low Energy Aug. 20, 2020
Application note Bluetooth Low Energy – Invalid Connection Request (SweynTooth) (Rev. A) Jul. 17, 2020
Application note CC13xx/CC26xx Hardware Configuration and PCB Design Considerations (Rev. E) Jun. 19, 2020
Application note Variable Time Tag Comparison on SimpleLink™ Devices Jun. 05, 2020
Application note Bluetooth Low Energy, Basic Rate/Enhanced Data Rate – Method Confusion Pairing V May 18, 2020
Application note CE Regulations for SRDs Operating in License-Free 2.4GHz/5GHz Bands-WiFi Devices Apr. 15, 2020
Application note Cloning Z-Stack Network Properties Using the SimpleLink Wireless MCU Family Mar. 31, 2020
Selection guide Leitfaden zur Auswahl drahtloser Kommunikationstechnologie Feb. 28, 2020
Selection guide 無線連線技術選擇指南 Feb. 28, 2020
Selection guide 무선 연결 기술 선택 가이드 Feb. 28, 2020
Application note Z-Stack Large Mesh Network Performance Using the SimpleLink™ Wireless MCU Family (Rev. B) Feb. 05, 2020
Application note Cryptographic Performance and Energy Efficiency on SimpleLink CC13x2/CC26x2 MCUs Jan. 28, 2020
Application note Ultra-Low Power Sensing Applications With CC13x2/CC26x2 (Rev. B) Jan. 27, 2020
Application note Running Bluetooth® Low Energy on CC2640 Without 32 kHz Crystal (Rev. C) Sep. 23, 2019
More literature Understanding security features for SimpleLink™ Zigbee CC13x2 and CC26x2 Wireles Jun. 17, 2019
Application note What's New in Zigbee 3.0 (Rev. A) Jun. 06, 2019
Application note Bluetooth® Low Energy Tree Structure Network May 29, 2019
Application note Z-Stack End Dev Pwr Cons Measuremen w/ the SimpleLink™ Wireless MCU Family (Rev. B) May 17, 2019
Application note Secure Boot in SimpleLink™ CC13x2/CC26x2 Wireless MCUs Apr. 15, 2019
Application note Measuring CC13xx and CC26xx current consumption (Rev. D) Jan. 10, 2019
Application note RF PCB Simulation Cookbook Jan. 09, 2019
Application note Low-Power ADC Solution for CC13x2 and CC26x2 Mar. 02, 2018
Application note Ultra-Low Power Designs With the CC13x2 and CC26x2 Sensor Controller Feb. 27, 2018
Application note Use of Low-power Zigbee® and Thread With the SimpleLink™ Wireless MCU Family Feb. 27, 2018
Application note Sensor Sequencing Using the CC13x2 and CC26x2 Sensor Controller Mar. 05, 2017

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
document-generic User guide
39.99
Description

To get started visit dev.ti.com/BOOSTXL-ULPSENSE

The ULP Sense BoosterPack is a kit designed to make it easy to demonstrate the ultra-low power features of the sensor controller included in the CC13x2/CC26x2 RF SoCs. 

Examples of applications that will greatly benefit from this are measurement on (...)

Features
  • 40-pin BoosterPack standard leveraging the LaunchPad ecosystem
  • Inductive flow meter measurements - LC circuits and logical gates
  • Ultra-Low Power accelerometer
  • Two Cap touch buttons
  • Analog Light Sensor
  • Reed Switch
  • Potentiometer (0 to 200 kOhm range)
DEBUG PROBE Download
document-generic User guide
149
Description

The Texas Instruments XDS110 EnergyTrace™ High Dynamic Range (ETHDR) is an accessory to the XDS110 Debug Probe (emulator) that increases the Dynamic Range of the Energy Trace feature. This allows performing very accurate power consumption measurements on all Simplelink Wireless MCUs while (...)

Features

The Texas Instruments XDS110 EnergyTrace™ High Dynamic Range (ETHDR) is the first accessory to the XDS110 Debug Probe (emulator). Designed to be a complete plug-in solution that brings EnergyTrace to the higher power wireless connectivity systems, it features an improved range, resolution and (...)

DEBUG PROBE Download
document-generic User guide
99
Description

The Texas Instruments XDS110 is a new class of debug probe (emulator) for TI embedded processors. The XDS110 replaces the XDS100 family while supporting a wider variety of standards (IEEE1149.1, IEEE1149.7, SWD) in a single pod. Also, all XDS debug probes support Core and System Trace in all ARM and (...)

Features

The XDS110 is the latest entry level debug probe (emulators) for TI embedded processors. Designed to be a complete solution that delivers JTAG and SWD connectivity at a low cost, the XDS110 is the debug probe of choice for entry-level debugging of TI microcontrollers, processors and SimpleLink (...)

DEBUG PROBE Download
XDS200 USB Debug Probe
TMDSEMU200-U
295
Description

The XDS200 is a debug probe (emulator) used for debugging TI embedded devices.  The XDS200 features a balance of low cost with good performance as compared to the low cost XDS110 and the high performance XDS560v2.  It supports a wide variety of standards (IEEE1149.1, IEEE1149.7, SWD) in a (...)

Features

The XDS200 is the mid-range family of JTAG debug probes (emulators) for TI processors. Designed to deliver good performance and the most common features that place it between the low cost XDS110 and the high performance XDS560v2, the XDS200 is the balanced solution to debug TI microcontrollers (...)

DEVELOPMENT KIT Download
document-generic User guide
Description

This LaunchPad speeds development on devices with integrated power amplifier and multi-band radio support for concurrent Sub-1Ghz and 2.4-GHz operation.  Protocols supported include Bluetooth® Low Energy, Sub-1 GHz, Thread, Zigbee®, 802.15.4, and proprietary RF with the compatible (...)

Features
  • Broad band antenna support for Sub-1 GHz (868 MHz / 915 MHz / 433 MHz) and 2.4 GHz frequency bands
  • On-board emulator gets you started with instant code development
  • All IOs accessible on pin headers compatible with the LaunchPad/BoosterPack eco system

Software development

SOFTWARE DEVELOPMENT KIT (SDK) Download
SimpleLink™ CC13x2 and CC26x2 software development kit (SDK)
SIMPLELINK-CC13X2-26X2-SDK The SimpleLink CC13x2 and CC26x2 software development kit (SDK) provides a comprehensive software package for the development of Sub-1 GHz and 2.4 GHz applications including support for Bluetooth® Low Energy, Zigbee®, Thread, 802.15.4-based, proprietary, and multiprotocol solutions on the (...)
Features
  • TI 15.4-Stack, an IEEE 802.15.4-based star topology networking solution for the Sub-1 GHz band (learn more at www.ti.com/LongRange)
  • Supports development of proprietary Sub-1 GHz and 2.4 GHz applications using the RF driver and the EasyLink Abstraction Layer (learn more at www.ti.com/LongRange)
  • TI (...)
CODE EXAMPLE OR DEMO Download
SimpleLink™ Wi-Fi® + Bluetooth® Low Energy coexistence
SIMPLELINK-COEXISTENCE-CC323X-CC26XX This page provides the relevant software and radio frequency (RF) design collateral needed to start implementing the SimpleLink™ Wi-Fi® + Bluetooth® Low Energy coexistence solution.
IDE, CONFIGURATION, COMPILER OR DEBUGGER Download
Arm® code generation tools - compiler
ARM-CGT The TI Arm® code generation tools support development of applications for TI Arm-based platforms, especially those featuring TI Arm Cortex-M and Cortex-R series devices. There are now two TI Arm® C/C++ compiler toolchains both of which can be used to compile and link C/C++ and assembly (...)
Features
  • TI Arm® Clang Compiler Tools release 1.2.1.STS:
    • Improved compiler-generated code size vs. legacy TI compiler
    • GCC-compatible compiler command-line interface
    • Source-Based Code Coverage, including Branch Coverage
      • With tiarmprofdata and tiarmcov utilities to help with visualization
    • Support for Arm C Language (...)
IDE, CONFIGURATION, COMPILER OR DEBUGGER Download
Code Composer Studio™ integrated development environment (IDE) for wireless connectivity
CCSTUDIO-WCS Code Composer Studio is an integrated development environment (IDE) that supports TI's Microcontroller and Embedded Processors portfolio. Code Composer Studio comprises a suite of tools used to develop and debug embedded applications. It includes an optimizing C/C++ compiler, source code editor (...)
IDE, CONFIGURATION, COMPILER OR DEBUGGER Download
Sensor Controller Studio
SENSOR-CONTROLLER-STUDIO Sensor Controller Studio is used to write, test and debug code for the CC26xx/CC13xx Sensor Controller, enabling ultra-low power application design. The tool generates an interface driver consisting of C source files with the firmware image, associated definitions, and generic functions that allow (...)
Features
  • Includes ready to use examples for several common use-cases
  • Full toolchain with built-in compiler and assembler for programming in a C-like programming language
  • Provides rapid development by using the integrated sensor controller task testing and debugging functionality including visualization of (...)
PLUG-IN Download
SimpleLink™ software development kit (SDK) plug-in for HomeKit
SIMPLELINK-SDK-PLUGIN-FOR-HOMEKIT This set of SimpleLink™ SDK plug-ins, complete with user's guides, integration guides and drivers enable enables MFi Licensees to develop Apple HomeKit applications utilizing the SimpleLink Wi-Fi® CC32XX SDK or SimpleLink CC13x2-CC26x2 SDK and respective devices in combination with the Apple MFi (...)
Features

The SimpleLink SDK plug-in for HomeKit applications provides a consistent API, across both Wi-Fi (IP) and Bluetooth™ Low Energy protocols, that supports these services:

  • HomeKit Accessory Protocol (HAP)
  • Security services: cipher, signing, key management
  • Software or Hardware MFi Authentication
  • (...)
SOFTWARE PROGRAMMING TOOL Download
SmartRF Flash Programmer
FLASH-PROGRAMMER SmartRF Flash Programmer 2 can be used to program the flash memory in Texas Instruments ARM based low-power RF wireless MCUs over the debug and serial interfaces.

SmartRF Flash Programmer can be used to program the flash memory in Texas Instruments 8051-based low-power RF wireless MCUs and for (...)

Features
  • Programming of SW images on low-power RF wireless MCUs
  • Programming/updating firmware and bootloader on the Evaluation Boards' USB MCU
  • Append software image to existing software on device
  • Read out software image from device into binary, hex or ELF files (elf and bin for ARM-devices only)
  • Verify software (...)
SOFTWARE PROGRAMMING TOOL Download
SmartRF Studio
SMARTRFTM-STUDIO SmartRF™ Studio is a Windows application that helps designers of RF systems to easily evaluate the radio at an early stage in the design process for all TI CC1xxx and CC2xxx low-power RF devices. It simplifies generation of the configuration register values and commands, as well as practical (...)
Features
  • Link tests. Send and Receive packets between nodes.
  • Antenna and radiation tests. Set the radio in continuous wave TX and RX states.
  • A set of recommended/typical register settings for all devices.
  • Read and write individual RF registers.
  • Execute individual commands to control the radio.
  • Detailed (...)
SOFTWARE PROGRAMMING TOOL Download
UniFlash stand-alone flash tool for microcontrollers, Sitara™; processors and SimpleLink™
UNIFLASH Supported devices: CC13xx, CC25xx, CC26xx, CC3x20, CC3x30, CC3x35, Tiva, C2000, MSP43x, Hercules, PGA9xx, IWR12xx, IWR14xx, IWR16xx, IWR18xx , IWR68xx, AWR12xx, AWR14xx, AWR16xx, AWR18xx.  Command line only: AM335x, AM437x, AM571x, AM572x, AM574x, AM65XX, K2G

CCS Uniflash is a standalone tool used to (...)

Design tools & simulation

CALCULATION TOOL Download
Third party wireless module search tool
3P-WIRELESS-MODULES The third party wireless module search tool helps developers to identify products that meet their end equipment specifications and procure production ready wireless modules. The third party module vendors included in the search tool are independent third party companies with expertise in designing (...)
Features
  • Modules listed are based on TI wireless technology supporting Wi-Fi®, Bluetooth®, Zigbee®, Sub-1 GHz, Sigfox, 2.4 GHz, multi-band connectivity and more
  • Modules integrate clocks, SPI flash and passive components
  • Listings included for hardware customization, software integration and cloud services
  • Listings (...)
CALCULATION TOOL Download
TI RF Range Estimator
RF-RANGE-ESTIMATOR — This tool is used to complete a range estimate for indoor and outdoor RF links using TI wireless devices. The outdoor calculation is based upon Line-of-Sight (LOS). For the indoor estimation, construction materials can be selected that are between the Tx and Rx unit. The greater the attenuation of (...)
Features
  • Range estimate spreadsheet for Sub-1 GHz and 2.4 GHz devices
  • Range debug checklist
CALCULATION TOOL Download
Z-Stack™ power calculator tool
ZIGBEE-POWER-CALC — This tool is used to allow SimpleLink™ Z-Stack™ Software users to analyze system power profile for a sleepy end device within a Zigbee application. This calculator enables the user to assess the potential system battery life and determine how to optimize battery life through configuring (...)
Features
  • Power calculator for CC13X2 and CC26X2 products using the Z-Stack software from the SimpleLink CC13X2 and CC26X2 software development kit (SDK)


DESIGN TOOL Download
Hardware design reviews for SimpleLink™ CC2xxx devices
SIMPLELINK-2-4GHZ-DESIGN-REVIEWS The SimpleLink hardware design review process provides a way to get in touch, one-on-one, with a subject matter expert that can help review your design and provide valuable feedback. A simple 3-step process for requesting a review as well as links to relevant technical documentation and resources (...)
SCHEMATIC Download
SWRR174.ZIP (21816 KB)
GERBER FILE Download
SWRC350A.ZIP (5945 KB)
GERBER FILE Download
SWRC363.ZIP (1651 KB)

Reference designs

REFERENCE DESIGNS Download
Industrial wireless condition monitoring reference design
TIDA-010012 — Use this reference design to quickly establish a wireless network that connects various types of sensors for condition monitoring directly to the Cloud. Condition Monitoring is based on a regular or permanent recording of the machine condition which is necessary for predictive maintenance. Inputs (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
VQFN (RGZ) 48 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos