3D DMD mechanical geometry
Data sheet
DLP300S
- 0.3-Inch (7.93-mm) diagonal micromirror array
- 1280 × 720 array of aluminum micrometer-sized mirrors, in an orthogonal layout
- 3.6 Megapixels, 2560 x 1440 pixels on the resin
- 5.4 micron micromirror pitch
- ±17° micromirror tilt (relative to flat surface)
- Side illumination for optimal efficiency and optical engine size
- Polarization independent aluminum micromirror surface
- 8-Bit SubLVDS input data bus
- Dedicated DLPC1438 3D print controller and DLPA200x PMIC/LED driver for reliable operation
The DLP300S digital micromirror device (DMD) is a digitally controlled micro-opto-electromechanical system (MOEMS) spatial light modulator (SLM). When coupled to an appropriate optical system, the DMD displays a very crisp and high quality image. This DMD is part of the chipset comprising the DLP300S DMD, DLPC1438 3D print controller and DLPA200x PMIC/LED driver. The compact physical size of the DLP300S DMD coupled with the controller and the PMIC/LED driver provides a complete system solution that enables fast, high resolution, reliable DLP 3D printers.
Get started with TI DLP® light-control technology page to learn how to get started with the DLP300S.
The DLP advanced light control resources on ti.com accelerate time to market, which include reference designs, optical module manufacturers, and DLP design network partners.
Technical documentation
No results found. Please clear your search and try again.
View all 2 | Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | DLP300S 0.3-Inch 3.6-Megapixel DMD for Low Cost TI DLP 3D Printers datasheet (Rev. B) | PDF | HTML | 17 May 2022 |
| Technical article | 3 key design decisions for any desktop 3D printer design | PDF | HTML | 19 Jul 2021 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
Optical module
DLP-OMM-SEARCH — DLP® Products third-party search tools
To best meet your design needs and accelerate your time-to-market, DLP® Products works with a variety of third parties to help with everything from optical modules and hardware design to specialty software and other production services. Download one or both search tools listed below to quickly (...)
DMD mounting design
DLPR070 — Series 245 DMD Mounting and Electrical Interconnect Information
Supported products & hardware
Products
≤ 0.47-in array pico products
Visible products (420 to 700 nm)
Near-UV products (400 to 420 nm)
Reference designs
TIDA-080010 — 3.6-Megapixel 3D printer reference design
This reference design features the DLP® Pico® products 0.3-inch 3.6-megapixel near-UV digital micromirror device (DMD) chipset for 3D printers. The design incorporates the DLP300S or DLP301S 2560 x 1440 (WQHD) DMD, DLPC1438 display controller, and the DLPA2005 PMIC/LED driver. The DLPC1438 3D (...)
Design guide: PDF
| Package | Pins | Download |
|---|---|---|
| DLP-S245 (FQK) | 57 | View options |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Information included:
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.