NEW

DLPC7540

ACTIVE

DLP® high resolution display controller for DLP471TE, DLP471NE, DLP650TE, DLP651NE DMDs

Top

Product details

Parameters

Display resolution (Max) 4K UHD (3840x2160) Component type Display Controller Chipset family DLP471TE, DLP471NE, DLP650TE, DLPA100 Input frame rate (Max) (Hz) 240 Input pixel clock (Max) (MHz) 600 Video ports 30-bit RGB, V-by-One open-in-new Find other Standard chipsets

Package | Pins | Size

BGA (ZDC) 676 961 mm² 31 x 31 open-in-new Find other Standard chipsets

Features

  • DLPC7540 controller using DLP471TE, DLP471NE, DLP650TE or DLP651NE digital micromirror device (DMD) supports
    • Up to 4K UHD at 60 Hz
    • Up to 1080p at 240 Hz (2D) and 120 Hz (3D)
  • Provides single V-by-One HS video input port with one, two, four, or eight lanes
    • Up to 600 MHz Pixel clock support
    • Up to 3.0 Gbps input transmission rate
  • Two OpenLDI (FPD-Link I) video input ports with 6-lanes (5 data) per port
  • Input formats supported
    • RGB, YCbCr and ICtCp
    • 4:4:4, 4:2:2, 4:2:0
  • Internal Arm Cortex-R4F processor with FPU
    • 88 configurable GPIOs
    • Programmable PWM generator
    • Programmable capture and delay timers
    • USB 2.0 high-speed OTG controller
    • SPI primary/secondary controllers
    • I2C primary/secondary controllers
    • UART and interrupt controllers
  • Warping engine
    • Improved 1D, 2D and 3D keystone correction
    • Optical distortion correction (radial and lateral color distortion e.g. for short throw )
    • Warping (multi-point manual warp and full warp map access 62x32 points)
    • Blending (manual blending and full bleding map access 63x32 points)
  • Additional image processing
    • DynamicBlack
    • TI DLP BrilliantColor™
    • HDR10 (PQ and HLG) support
    • Frame rate conversion
    • Color coordinate adjustment
    • White color temperature adjustment
    • Programmable degamma
    • Spatial-temporal multiplexing
    • Integrated support for 3-D display
  • Splash screen display and capture
  • Integrated 2G-bit frame memory eliminates need for external high-speed memory
  • External memory support
    • Parallel flash for µP and PWM sequences
    • Secondary flash for Splash Capture, Warping
  • System control
    • DMD power and reset driver control
    • DMD horizontal and vertical image flip
  • JTAG boundary scan test support
  • LED, RGB Laser and Laser Phosphor illuminations

All trademarks are the property of their respective owners.

open-in-new Find other Standard chipsets

Description

The DLPC7540 is a digital display controller for the 4K UHD and 1080p display chipsets, which comprises of DLPC7540 controller, DLP471TE, DLP471NE, DLP650TE or DLP651NE DMDs and DLPA100 Power and Motor driver. This solution targets display systems that require high resolution and high brightness in a small form factor. To ensure reliable operation, the DLPC7540 controller must always be used with the DLP471TE, DLP471NE, DLP650TE or DLP651NE DMDs and the DLPA100 power management integrated circuit in each application.

open-in-new Find other Standard chipsets
Download
Similar products you might be interested in
open-in-new Compare products
Similar but not functionally equivalent to the compared device:
NEW DLP471NE ACTIVE DLP® 0.47-inch 1080p HSSI digital micromirror device (DMD) Companion digital micromirror device for 1080p resolution
NEW DLP471TE ACTIVE DLP® 0.47-inch 4K UHD HSSI digital micromirror device (DMD) Companion digital micromirror device for 4K UHD resolution
NEW DLP650TE ACTIVE DLP® 0.65-inch 4K UHD digital micromirror device (DMD) Companion digital micromirror device for 4K UHD resolution and higher brightness
NEW DLP651NE ACTIVE DLP® products 0.65-inch 1080p HSSI digital micromirror device (DMD) Companion digital micromirror device for 1080p resolution and higher brightness

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet DLPC7540 High Resolution Controller datasheet Oct. 09, 2020
User guide DLP Display DLPC7540 4K UHD EVM May 13, 2021
Technical article How to solve two screenless TV design challenges Mar. 17, 2021

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
document-generic User guide
999
Description

The DLP® products DLP471TEEVM, when combined with the DLPC7540EVM, can accelerate the prototyping time of a DLP 0.47-inch 4K UHD system. The DLP471TEEVM provides a solution for evaluating the 0.47-inch 4K UHD DMD, which is designed to pair with the DLPC7540EVM and can display SPLASH, test (...)

Features
  • 4K UHD (3840 × 2160) display resolution
  • 5.4-µm micromirror pitch
  • ±17° micromirror tilt (relative to flat surface)
  • Bottom illumination
  • High speed serial interface (HSSI) input data bus
EVALUATION BOARD Download
document-generic User guide
999
Description

The DLP® products DLP650TEEVM, when combined with the DLPC7540EVM, can accelerate the prototyping time of a DLP 0.65-inch 4K UHD system. The DLP650TEEVM provides a solution for evaluating the 0.65-inch 4K UHD DMD, which is designed to pair with the DLPC7540EVM and can display SPLASH, test (...)

Features

4K UHD (3840 × 2160) display resolution
7.6-µm micromirror pitch
±12° micromirror tilt (relative to flat surface)
Corner illumination
High speed serial interface (HSSI) input data bus

EVALUATION BOARD Download
document-generic User guide
Description

The DLP® products DLPC7540EVM, when combined with the DLP471TEEVM or DLP650TEEVM, can accelerate the prototyping time of a DLP 4K UHD system. The DLPC7540EVM provides a solution for driving either the 0.47-inch 4K UHD or 0.65-inch 4K UHD standard digital micromirror devices (DMDs), while (...)

Features
  • Supports up to 4K UHD at 60 Hz
  • Supports up to 1080p at 240 Hz (2D) and 120 Hz (3D)
  • Supports LED, RGB laser and laser phosphor illuminations


Software development

GUI FOR EVALUATION MODULE (EVM) Download
DLP® Display and Light Control EVM GUI Installer
DLPDLC-GUI The DLP® Display and Light Control evaluation module (EVM) includes a Windows®-based GUI tool used to control the EVM through SPI, I2C, or USB commands.
Features
  • Information page lets user get the status of the EVM
  • Patterns and images page lets user set display patterns and images to the device and check which pattern is displayed
  • Video and color page lets user modify the type of video output given to the device and choose from select color temperatures
  • Display (...)

Design tools & simulation

PCB LAYOUT Download
DLPR092.ZIP (22587 KB)

CAD/CAE symbols

Package Pins Download
BGA (ZDC) 676 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos