DLPR410

ACTIVE

PROM for DLP® Discovery 4100 chipset

Top

Product details

Parameters

Chipset family DLPR410, DLP650LNIR, DLP7000, DLP9500, DLP7000UV, DLP9500UV, DLPC410, DLPA200 Component type PROM open-in-new Find other High-speed visible chipsets

Package | Pins | Size

DSBGA (YVA) 48 0 mm² 8 x 9 open-in-new Find other High-speed visible chipsets

Features

  • Pre-programmed Xilinx PROM configures the DLPC410ZYR DMD digital controller
  • I/O pins compatible with 1.8 V to 3.3 V
  • 1.8 V core supply voltage
  • –40°C to 85°C operating temperature range
open-in-new Find other High-speed visible chipsets

Description

The DLPR410 device is a programmed PROM used to properly configure the DLPC410ZYR Controller to operate five different digital micromirror device (DMD) options: DLP650LNIRFYL, DLP7000FLP, DLP7000UVFLP, DLP9500FLN and, DLP9500UVFLN DMDs. The firmware in this device enables the DLPC410ZYR Controller to provide system data throughput rates up to 48 Gigabits per second (Gbps) with the options for random row addressing and Load4 capabilities. Often this family of chips is designed into high speed UV and NIR optical systems such as direct imaging lithography, 3D printing and laser marking equipment that need fast throughput and pixel accurate control.

Get started with TI DLP® light-control technology page to learn how to get started with the DLPC410ZYR. The DLP advanced light control resources on ti.com accelerate time to market, which include evaluation modules, reference designs, optical modules manufacturers, and DLP design network partners.

open-in-new Find other High-speed visible chipsets
Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet DLPR410 Configuration PROM datasheet (Rev. G) May 21, 2021
White paper High-power NIR laser system benefits with TI’s DLP® technology Dec. 12, 2018
Technical article From 3D Printing to Lithography, TI DLP® Ultraviolet Chipsets Provide Flexible Solutions for UV Imaging Aug. 27, 2015

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
document-generic User guide
2799
Description
This DLP evaluation module (EVM) houses DLP650LNIR, a 0.65 NIR WXGA Series 450 DMD intended for use in applications using 850-2000 nm near-infrared (NIR) illumination sources. DLPLCR65NEVM is an advanced imaging option for laser sintering, ablation, marking, coding, printing and other applications (...)
Features
  • Targets 850-2000 nm and compatible with multiple NIR illumination sources (ex. lasers, lamps, LEDs)
  • DLP650LNIR DMD has 1280 x 800 mirrors with 10.8 µm pitch
  • DLP650LNIR DMD has a thermally efficient S450 package
  • 12-inch flex cable for flexible positioning of the DMD on a benchtop
EVALUATION BOARD Download
document-generic User guide
1799
Description
This DLP evaluation module (EVM) houses DLP7000, a 0.7 XGA 2xLVDS Type A DMD containing 1076 x 768 micromirrors with 13.6 µm pitch. When paired with DLPLCRC410EVM, users get pixel accurate control with 1-bit pattern rates up to 32,225 Hz. DLPLCR70EVM is right evaluation choice for designers (...)
Features
  • Targets 400-700 nm with 1-bit pattern rates up to 32,225 Hz
  • DLP7000 DMD has 1076x768 mirrors with 13.6 µm pitch
  • DMD board with holes for convenient mounting
  • 12-inch flex cable for flexible positioning of the DMD on a benchtop
EVALUATION BOARD Download
document-generic User guide
3999
Description
This DLP evaluation module (EVM) houses DLP9500, a 0.95 1080p 2xLVDS Type-A DMD containing over two million micromirrors with 10.8 µm pitch. When paired with DLPLCRC410EVM, users get pixel accurate control with 1-bit pattern rates up to 23,148 Hz. DLPLCR95EVM is the right evaluation choice for (...)
Features
  • Targets 400-700 nm with 1-bit pattern rates up to 23,148 Hz
  • DLP9500 DMD has 1920x1080 mirrors with 10.8 µm pitch
  • DMD board with holes for convenient mounting
  • Two 12-inch flex cables for flexible positioning of the DMD on a benchtop
EVALUATION BOARD Download
document-generic User guide
1999
Description
The DLPLCRC410EVM, paired with one of five other DMD-based EVMs, is an evaluation platform exhibiting advanced light control for applications like lithography, 3D Printing (SLS and SLA), Machine Vision, and Marking and Coding. This EVM enables evaluations of new customer illumination sources (...)
Features
  • Light control of one of 5 different DMDs
  • Binary pattern rates up to 32 kHz
  • Grayscale patterns rates up to 1.9 kHz
  • 2xLVDS DDR input data interface at 400Mhz clock rate
  • Supports random row addressing of DMD rows
EVALUATION BOARD Download
Optecks DLP650LNIR DMD evaluation module
OPTECKS-3P-DLP650LNIR-EVM
Description

The Optecks DLP650LNIR evaluation module (EVM) includes DLP650LNIR DMD, a 0.65" NIR WXA Series 450 DMD designed to be used in applications that operate in 850-2000 nm near-infrared (NIR) spectrum. Optecks DLP650LNIR EVM is an advanced imaging solution for laser sintering, ablation, marking, coding (...)

Features
  • Includes 4 mounting holes for easy mounting and alignment when mounted with optical module
  • Targets 850-2000 nm and compatible with multiple NIR illumination sources such as lasers, lamps and LEDs
  • 12-inch flex cable for flexible positioning of the DMD on a benchtop
EVALUATION BOARD Download
document-generic User guide
Description
DLi kits for DLP® Discovery™ chipsets (DLPC410 with DLP7000, DLP7000UV, DLP9500 or DLP9500UV DMDs) support custom interface development for industrial and medical systems and instrumentation. Choose among kit options based on desired hardware and software support. DLi4120 kits include (...)
Features
  • D4100 kits: Use with DLP Discovery Explorer GUI and DLPC410 API
  • Light Animator software supports DLi4120 and DLi 4130 kits - create, manage and manipulate image sequences
  • DLi4120 kits also supports:
    • ALP-4.1 basic API – upload, sequence, control patterns and process commands
    • Up to 300 Hz binary patterns
  • (...)
EVALUATION BOARD Download
Description

ViALUX's Direct Link Sensor provides an integrated optics and electronics design for DLP7000. The DLS module adresses 3D machine vision use cases that demand for coupling high-performance DLP projection with precisely synchronized image acquisition. The DLS concept overcomes the former need of (...)

Features
  • High power LED light sources for blue (460nm), NIR (850nm) and white light projection
  • One or two CMOS image sensors with 1920x1200 pixels
  • Frame rates from 166 fps full resolution to 5000 fps for ROI
  • One single USB-3.2 Gen 1x1 (Type-A ) connection to PC
  • Synchronization of multiple DLS modules
EVALUATION BOARD Download
Description
ViALUX’ SuperSpeed V-Modules provide complete subsystems containing a controller board for DLPC410, a digital micromirror device (DLP650LNIR, DLP7000, DLP7000UV, DLP9500, DLP9500UV or .96 WUXGA DMD) and ALP-4 controller suite software. The industrial grade modules support high-performance (...)
Features
  • USB 3.0, lossless compression, low latency
  • 64 or 128 Gbit on-board RAM for pattern storage
  • ALP-4 Controller Suite: Set bit depth, triggers, frame rate, pattern display time, pattern looping and LED parameters
  • V-650L NIR: 10,752 Hz binary pattern rate
  • V-7001 VIS/UV: 22,727 Hz binary pattern rate
  • V-9501 (...)
EVALUATION BOARD Download
Description
LUXBEAM LITHOGRAPHY SYTEMS (LLS) is a sub system for direct imaging lithography machines including fully automated in-line machines for 24/7 manufacturing. The system comes with a documented interface and on-site support for easy hardware and software integration. Several photo head options are (...)
Features
  • Windows 10 PRO
  • Photo heads for inner & outer layer PCB lithography
  • Photo heads for solder mask lithography
  • Photo heads for advanced packaging on PCB and wafer
  • Laser and LED light sources from 350 to 420 nm
  • SW kit for data preprocessing and print control
  • Real-time imaging correction according to fiducial (...)
EVALUATION BOARD Download
Description

The LUXBEAM® Rapid System LRS-HD is a DLP® technology based stereolithography sub-system, specifically designed for single head scrolling motion 3D printing and Additive Manufacturing systems. With the robust and reliable high resolution DLP9500 chip, the LRS-HD variants UV, Hybrid (HY), and (...)

Features
  • DLP9500 0.95” 1080p HD
  • Up to 7W
  • Single head scrolling system for 3D printing and additive manufacturing
  • 1920 x 1080, (UV/VIS)
  • 1920 x 1200, (VIS)
  • Air cooling (fan)
  • Complete API (Windows, Linux), platform independent web interface
EVALUATION BOARD Download
Description

Offering the same performance as the LRS-HD light engines, the LUXBEAM® Rapid System LRS-MCx offers stackability of modules for stitched images down to 50 micron pixel pitch in image. This allows for highest manufacturing throughput for 3D printing with single pass linear motion systems. Special (...)

Features
  • DLP9500 0,95” 1080p HD
  • Up to 9W (with 405 nm), 7W (with 385nm), 5W (with 365nm)
  • Multihead scrolling systems for 3D printing and Additive Manufaturing (AM)
  • 1920 x 1080, (UV/VIS)
  • 1920 x 1200, (VIS)
  • Liquid cooling (water)
  • Complete API (Windows, Linux), platform independent web interface
  • Advanced control (...)
EVALUATION BOARD Download
Description
The LUXBEAM RAPID SYSTEM LRS-UV/HY/VIS is a 3D printer subsystem with flexible build area and high throughput, high resolution manufacturing. It enables smart functions such as sub-pixelation (SPX) for resolution enhancement, and pixel power control (PPC) to equalize energy per pixel.  It also (...)
Features
  • Optimized for 3D printing
  • Scalable build area with scrolling
  • Gigabit Ethernet protocol
  • Multiple LED options available
  • Multiple lens options available
EVALUATION BOARD Download
Description
The LUXBEAM 4600 serves high-speed industrial applications requiring high resolution, fast frame rates, and single pixel control. It includes a DMD board connected with a flex cable and VISITECH’s LUXWARE firmware for memory management, sequencing and I/O signaling. The board also has a (...)
Features
  • Compact form factor (179 mm x76 mm)
  • Gigabit Ethernet interface
  • External optical synchronization
  • Customization available
EVALUATION BOARD Download
Wintech W4100 High Speed Development Kit
Provided by Wintech Digital Systems Technology
Description
The Wintech W4100 development kit provides users with an alternative to Texas Instruments DLP® Discovery™ 4100 development platform. It utilizes the same FPGA platform and same data interfaces for frame rates up to 32,552 Hz and grayscale operation. The W4100 is compatible with the (...)
OPTICAL MODULE Download
Optecks Telecentric NIR optical engine
Provided by Optecks, LLC
Description

The SPARK NIR telecentric optical engine is designed for the 0.65” digital micro-mirror devices with 16:9 aspect ratio such as the DLP650LNIR. All optical components have a high-quality anti-reflection (AR) coating within 600 - 1050 nm spectrum. The SPARK optical engine has the capability of (...)

Features
  • Interchangeable f-mount projection lens
  • 600 - 1050 nm near-infrared (NIR) wavelengths
  • Compatible with Optecks DLP650LNIR EVM
  • Powerful homogenizer for laser applications
  • LED, fiber optic, or fiber light guide cables mounting capabilities
  • High power light or laser
OPTICAL MODULE Download
Description
ViALUX’s STAR-07 CORE provides compact optics designed for DLP7000. It is available as an accessory or a fully integrated industrial pattern projection unit with high-power LED light source and monochrome or RGB options. STAR-07 has two lens options - a standard projection lens with zoom (...)
Features
  • High power LED light engines available with LED driver support
  • Compatible with ViALUX ALP controller suite software
  • Standard lens: 1.8  to 2.1 throw ratio; 0.4 m to 10.0 m working distance
  • Wide lens: 0.9 throw ratio; 0.5 m to 2.0 m working distance
  • Offset 125%

CAD/CAE symbols

Package Pins Download
DSBGA (YVA) 48 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos