Top
Low-power 100BASE-T1 automotive PHYTER™ Ethernet physical layer transceiver

DP83TC811R-Q1

ACTIVE

Product details

Parameters

Datarate (Mbps) 100BASE-T1 Interface type MII, RMII, RGMII Number of ports Single Rating Automotive Features Single supply, WoL, Cable diagnostics, 25-MHz clock out, JTAG1149.1 Supply voltage (V) 3.3 IO supply (Typ) (V) 1.8, 2.5, 3.3 Operating temperature range (C) -40 to 125 Cable length (m) 60 open-in-new Find other Ethernet PHYs

Package | Pins | Size

VQFNP (RND) 36 36 mm² 6 x 6 open-in-new Find other Ethernet PHYs

Features

  • 100BASE-T1 – IEEE 802.3bw Compliant
    • OPEN Alliance Qualified
    • Interoperable With BroadR-Reach and 100BASE-T1 PHYs
  • AEC-Q100 Qualified for Automotive Applications:
    • Device Temperature Grade 1: –40°C to +125 °C Ambient Operating Temperature
    • Device HBM ESD Classification Level 3A
    • Device CDM ESD Classification Level C5 for All Pins Except Pin 5
    • Device CDM ESD Classification Level C3 for Pin 5
    • Device IEC61000-4-2 ESD Classification Level 4 for Pins 12 and 13: ±8-kV Contact Discharge
  • MAC Interfaces: MII, RMII and RGMII
  • VQFN, Wettable Flank Packaging
  • IEEE 1588 SFD Support
  • Low Transmit and Receive Latency for AVB/TSN
  • Low Active Power Operation: < 230 mW
  • Configurable I/O Voltages: 3.3 V, 2.5 V, and 1.8 V
  • Power Savings Features:
    • Sleep, Standby and Disable
    • Wake-on-LAN (WoL)
  • Diagnostic Tool Kit
    • Signal Quality Indication (SQI)
    • Time Domain Reflectometry (TDR)
    • Electrostatic Discharge Sensor
    • Voltage Sensor
    • Temperature Sensor
    • PRBS Built-In Self-Test

All trademarks are the property of their respective owners.

open-in-new Find other Ethernet PHYs

Description

The DP83TC811R-Q1 device is an IEEE 802.3bw-compliant automotive PHYTER™ Ethernet physical layer transceiver. It provides all physical layer functions needed to transmit and receive data over unshielded single twisted-pair cables. The device provides xMII flexibility with support for standard MII, RMII, and RGMII MAC interfaces.

This device includes the Diagnostic Tool Kit, providing an extensive list of real-time monitoring tools, debug tools and test modes. Within the tool kit is the first integrated electrostatic discharge (ESD) monitoring tool. It is capable of counting ESD events on both the xMII and MDI as well as providing real-time monitoring through the use of a programmable interrupt. Additionally, the DP83TC811R-Q1 includes a pseudo random binary sequence (PRBS) frame generation tool, which is fully compatible with internal loopbacks, to transmit and receive data without the use of a MAC. The DP83TC811R-Q1 is housed in a 6.00-mm × 6.00-mm, 36-pin VQFN wettable flank package.

open-in-new Find other Ethernet PHYs
Download
Similar products you might be interested in
open-in-new Compare products
Same functionality but is not pin-for-pin or parametrically equivalent to the compared device:
NEW DP83TD510E PREVIEW IEEE 802.3CG 10BASE-T1L Ethernet PHY 10BASE-T1L PHY with 1.7-km cable drive capability over extended temperature range of -40°C to 105°C

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 10
Type Title Date
* Datasheet DP83TC811R-Q1 Low Power Automotive PHY 100BASE-T1 Automotive Ethernet Physical Layer Transceiver datasheet (Rev. B) Nov. 27, 2018
Application note Selection and specification of crystals for Texas Instruments ethernet physical Feb. 06, 2019
Application note DP83TC811 Low-Power Operation Jun. 15, 2018
Application note DP83TC811 Diagnostic Toolkit May 31, 2018
Application note DP83TC811 Systems and Reference Schematics May 31, 2018
Technical articles The importance of automotive Ethernet standards May 01, 2018
White paper 100BASE-T1 Ethernet: the evolution of automotive networking Apr. 24, 2018
Application note DP83TC811x-Q1 IEEE802.3bw Compliance and Debug Nov. 21, 2017
User guide DP83TC811EVM User's Guide Nov. 03, 2017
Technical articles How Ethernet technology is shifting modern markets 40 years after its inception Jul. 27, 2015

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
299
Description

The DP83TC811EVM is IEEE 802.3bw compliant, supporting 100BASE-T1. The DP83TC811R and DP83822H are configured in RGMII back-to-back, allowing a seamless media conversion from 100BASE-T1 to 100BASE-TX. This design has been tested and validated at UNH for 100BASE-T1 compliance.

The DP83TC811EVM incudes (...)

Features
  • 100BASE-T1 compliance
  • Media conversion from 100BASE-T1 to 100BASE-TX
  • On-Board MSP430F5529 with USB-2-MDIO for register access
  • Supports interoperability testing, compliance testing and BER testing 
EVALUATION BOARD Download
299
Description

The DP83TC811SEVM is IEEE 802.3bw compliant, supporting 100BASE-T1. The DP83TC811SEVM is an xMII evaluation board for simple access to these interfaces: MII, RMII, RGMII, SGMII and SMI. This design has been tested and validated at UNH for 100BASE-T1 compliance. The DP83TC811EVM incudes an (...)

Features
  • 100BASE-T1 Compliance
  • MII, RMII, RGMII, SGMII and SMI support
  • On-board wide VIN LDO regulator
  • Supports interoperability testing, compliance testing and BER testing 

Software development

DRIVER OR LIBRARY Download
Ethernet PHY Linux drivers & tools
ETHERNET-SW The Linux drivers for Texas Instruments' Ethernet physical layer (PHY) transceivers support communication through the serial management interface (MDC/MDIO) to configure and read PHY registers.

The USB-2-MDIO software lets you directly access the registers during debug and prototyping.  (...)

Design tools & simulation

SIMULATION MODEL Download
SNLM235.ZIP (134 KB) - IBIS Model
SIMULATION MODEL Download
SNLM238.ZIP (1 KB) - BSDL Model
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOL Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Reference designs

REFERENCE DESIGNS Download
Automotive domain controller for gateway, assisted and automated driving systems reference design
TIDEP-01020 Decentralized vehicle architectures on the road today use individual ECUs that lack processing power and high-speed interfaces to handle the complex tasks and data movement needs of newly emerging automotive architectures. Higher level functions require the right combination of DMIPS, data bandwidth (...)
document-generic Schematic
REFERENCE DESIGNS Download
Daisy-chained power and data over single pair Ethernet (T1) reference design
TIDA-010076 The TIDA-010076 shows the transfer of 220-W power and 100-Mbit/s data over SPE. Communication systems in daisy-chain topology need significantly less hardware and wiring than conventional systems in star-topology. When combined with single-pair Ethernet (SPE, 100BASE-T1) and power over data line (...)
document-generic Schematic
REFERENCE DESIGNS Download
Entry-level head unit display audio with Jacinto™ 6 entry reference design
TIDEP-0097 Based on TI's Jacinto™ DRA71x processor, this automotive reference design focuses on system-level cost savings. The 6 layer design reduces PCB costs through an optimized via breakout scheme, integration of key features and an optimized power distribution network. Functionality can be added or (...)
document-generic Schematic
REFERENCE DESIGNS Download
Cost-optimized digital cluster automotive reference design with Jacinto™ automotive processor
TIDEP-01002 The Jacinto™ automotive processor Digital Cluster Automotive Reference Design (DCARD) is a cost-optimized design for reconfigurable digital cluster systems.  DCARD is a complete and self-contained 6-layer PCB design to enable 60fps digital cluster solutions on 1920x720 resolution displays (...)
document-generic Schematic
REFERENCE DESIGNS Download
Automotive Stand-Alone Gateway Reference Design with Ethernet and CAN
TIDA-01425 The TIDA-01425 is a subsystem reference design for automotive gateways focused on increasing bandwidth and processing power in gateway applications. The design implements Ethernet physical layer transceivers (PHYs) for increased bandwidth along with an automotive processor for greater processing (...)
document-generic Schematic

CAD/CAE symbols

Package Pins Download
VQFNP (RND) 36 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos