Home Motor drivers Brushed DC (BDC) motor drivers
Home
Motor drivers
Brushed DC (BDC) motor drivers
NEW

DRV8213

ACTIVE

11-V 4-A brushed DC motor driver with intergrated current sense, current regulation and stall detect

Order now
Data sheet

DRV8213

ACTIVE
Data sheet Order now

Product details

Number of full bridges 1 Vs (min) (V) 1.65 Vs ABS (max) (V) 12 Peak output current (A) 4 RDS(ON) (HS + LS) (mΩ) 240 Sleep current (µA) 0.01 Control mode PWM Control interface Hardware (GPIO) Features Analog current monitor, Integrated current sense, Stall Detection Rating Catalog Operating temperature range (°C) -40 to 125
Number of full bridges 1 Vs (min) (V) 1.65 Vs ABS (max) (V) 12 Peak output current (A) 4 RDS(ON) (HS + LS) (mΩ) 240 Sleep current (µA) 0.01 Control mode PWM Control interface Hardware (GPIO) Features Analog current monitor, Integrated current sense, Stall Detection Rating Catalog Operating temperature range (°C) -40 to 125
WQFN (RTE) 16 9 mm² 3 x 3 WSON (DSG) 8 4 mm² 2 x 2
  • N-channel H-bridge brushed DC motor driver
  • 1.65-V to 11-V operating supply voltage range
  • 240-mΩ R DS(on) (High-Side + Low-Side)
  • High output current capability: 4-A Peak
  • PWM control interface, up to 100 kHz switching
  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Integrated current sensing and current regulation
  • Analog current sense output ( IPROPI)
  • Gain select ( GAINSEL) feature for -
    • High accuracy current sensing down to 10 mA
    • Optimized R DS(ON) and overcurrent limit for different current ranges
  • Configurable inrush time (RTE Package only)
  • Internal charge pump
  • Long battery life with low-power sleep mode
    • < 60 nA maximum sleep current
  • Small package footprint
  • Integrated protection features
    • VM undervoltage lockout (UVLO)
    • Auto-retry overcurrent protection (OCP)
    • Thermal shutdown (TSD)
    • Stall detection (RTE Package only)
  • N-channel H-bridge brushed DC motor driver
  • 1.65-V to 11-V operating supply voltage range
  • 240-mΩ R DS(on) (High-Side + Low-Side)
  • High output current capability: 4-A Peak
  • PWM control interface, up to 100 kHz switching
  • Supports 1.8-V, 3.3-V, and 5-V logic inputs
  • Integrated current sensing and current regulation
  • Analog current sense output ( IPROPI)
  • Gain select ( GAINSEL) feature for -
    • High accuracy current sensing down to 10 mA
    • Optimized R DS(ON) and overcurrent limit for different current ranges
  • Configurable inrush time (RTE Package only)
  • Internal charge pump
  • Long battery life with low-power sleep mode
    • < 60 nA maximum sleep current
  • Small package footprint
  • Integrated protection features
    • VM undervoltage lockout (UVLO)
    • Auto-retry overcurrent protection (OCP)
    • Thermal shutdown (TSD)
    • Stall detection (RTE Package only)

The DRV8213 is an integrated motor driver with N-channel H-bridge, charge pump, current sense output, current regulation, and protection circuitry. The tripler charge pump allows the device to operate down to 1.65 V to accommodate 1.8-V supply rails and low-battery conditions. The charge pump integrates all capacitors and allows for 100% duty cycle operation.

An internal current mirror implements current sensing and regulation. This eliminates the need for a large power shunt resistor, saving board area and reducing system cost. The IPROPI current sense output allows a microcontroller to detect motor stall or changes in load conditions. The gain select (GAINSEL) feature allows high accuracy current sensing down to 10 mA average motor current. Using the VREF pin, this device can regulate the motor current during startup and high-load events without interaction from a microcontroller. The RTE package supports sensorless motor stall detection and reporting to microcontroller.

A low-power sleep mode achieves ultra-low quiescent current by shutting down most of the internal circuitry. Internal protection features include undervoltage lockout, overcurrent, and overtemperature.

The DRV8213 is an integrated motor driver with N-channel H-bridge, charge pump, current sense output, current regulation, and protection circuitry. The tripler charge pump allows the device to operate down to 1.65 V to accommodate 1.8-V supply rails and low-battery conditions. The charge pump integrates all capacitors and allows for 100% duty cycle operation.

An internal current mirror implements current sensing and regulation. This eliminates the need for a large power shunt resistor, saving board area and reducing system cost. The IPROPI current sense output allows a microcontroller to detect motor stall or changes in load conditions. The gain select (GAINSEL) feature allows high accuracy current sensing down to 10 mA average motor current. Using the VREF pin, this device can regulate the motor current during startup and high-load events without interaction from a microcontroller. The RTE package supports sensorless motor stall detection and reporting to microcontroller.

A low-power sleep mode achieves ultra-low quiescent current by shutting down most of the internal circuitry. Internal protection features include undervoltage lockout, overcurrent, and overtemperature.
open-in-new Find other Brushed DC (BDC) motor drivers
Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 7
Type Title Date
* Data sheet DRV8213 4-A Brushed DC Motor Driver with Integrated Current Sense, Current Regulation and Stall Detection datasheet PDF | HTML 08 Apr 2022
Certificate DRV8213EVM EU RoHS Declaration of Conformity (DoC) 03 May 2023
EVM User's guide DRV8213_14_34EVM User's Guide PDF | HTML 24 Jan 2023
Technical article Why are you still driving automotive motors with relays? 13 Jul 2017
Technical article The story of motor-drive integration 09 Jan 2017
Technical article How to create a dynamic power solution for stepper motors, relays and LEDs 01 Nov 2016
Technical article How to avoid motor and system overvoltage using AVS technology without external components 14 Oct 2016

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

DRV8213EVM — DRV8213 evaluation module for 11-V 4-A brushed DC motor driver with integrated current sense

The DRV8213 evaluation module (EVM) allows for easy evaluation of the DRV8213 device. The EVM has been programmed and configured to work out of the box and begin spinning motors right away.

The DRV8213 is an integrated motor driver with N-channel H-bridge, charge pump, current sense output, (...)

User guide: PDF | HTML
Not available on TI.com
Package Pins Download
WQFN (RTE) 16 View options
WSON (DSG) 8 View options
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos