70-V max, 6.5A peak 3-phase motor driver


Product details


Rating Catalog Control method External Control Architecture Integrated FET Control interface 3xPWM RDS(ON) (HS + LS) (mOhms) 220 Peak output current (A) 6.5 Vs (Min) (V) 10.8 Vs ABS (Max) (V) 70 Features Integrated FETs Operating temperature range (C) -40 to 85 open-in-new Find other Brushless DC (BLDC) motor drivers

Package | Pins | Size

HTSSOP (DDW) 44 85 mm² 14 x 6.1 open-in-new Find other Brushless DC (BLDC) motor drivers


  • High-Efficiency Power Stage (up to 97%) With Low RDS(on)
    MOSFETs (80 mΩ at TJ = 25°C)
  • Operating Supply Voltage up to 50 V
    (70-A Absolute Maximum)
  • DRV8312 (Power Pad Down): up to 3.5-A Continuous
    Phase Current (6.5-A Peak)
  • DRV8332 (Power Pad Up): up to 8-A Continuous Phase
    Current (13-A Peak)
  • Independent Control of Three Phases
  • PWM Operating Frequency up to 500 kHz
  • Integrated Self-Protection Circuits Including Undervoltage,
    Overtemperature, Overload, and Short Circuit
  • Programmable Cycle-by-Cycle Current Limit Protection
  • Independent Supply and Ground Pins for Each Half Bridge
  • Intelligent Gate Drive and Cross Conduction Prevention
  • No External Snubber or Schottky Diode is Required
    • BLDC Motors
    • Three-Phase Permanent Magnet Synchronous Motors
    • Inverters
    • Half Bridge Drivers
    • Robotic Control Systems

All other trademarks are the property of their respective owners

open-in-new Find other Brushless DC (BLDC) motor drivers


The DRV83x2 are high-performance, integrated three-phase motor drivers with an advanced protection system.

Because of the low RDS(on) of the power MOSFETs and intelligent gate drive design, the efficiency of these motor drivers can be up to 97%. This high efficiency the use of smaller power supplies and heatsinks, and the devices are good candidates for energy-efficient applications.

The DRV83x2 require two power supplies, one at 12 V for GVDD and VDD, and another up to 50 V for PVDD. The DRV83x2 can operate at up to 500-kHz switching frequency while still maintaining precise control and high efficiency. The devices also have an innovative protection system safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards are short-circuit protection, overcurrent protection, undervoltage protection, and two-stage thermal protection. The DRV83x2 have a current-limiting circuit that prevents device shutdown during load transients such as motor start-up. A programmable overcurrent detector allows adjustable current limit and protection level to meet different motor requirements.

The DRV83x2 have unique independent supply and ground pins for each half-bridge. These pins make it possible to provide current measurement through external shunt resistor and support half bridge drivers with different power supply voltage requirements.

open-in-new Find other Brushless DC (BLDC) motor drivers
Similar products you might be interested in
open-in-new Compare products
Same functionality with different pin-out to the compared device.
NEW DRV8316 PREVIEW 40-V max 8-A peak 3-phase motor driver with integrated current sensing Features lower Rdson, adjustable slew rate, and integrated buck and CSAs
Similar functionality to the compared device.
DRV8320 ACTIVE 65-V max 3-phase smart gate driver Three-phase gate driver supports external MOSFETs for high current

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 16
Type Title Date
* Data sheet DRV83x2 Three-Phase PWM Motor Driver datasheet (Rev. E) Dec. 31, 2014
Application note Hardware Design Considerations for an Electric Bicycle using BLDC Motor (Rev. B) Jun. 23, 2021
Technical article A basic brushless gate driver design – part 3: integrated vs. discrete half bridges Dec. 16, 2020
Application note Hardware Design Considerations for an Efficient Vacuum Cleaner Using a BLDC Moto (Rev. B) Mar. 06, 2019
Application note Best Practices for Board Layout of Motor Drivers (Rev. A) Jan. 22, 2019
Technical article Connectivity helps integrate intelligent motor control on a single MCU Jun. 06, 2018
Technical article Cut the power and complexity of your appliance designs Feb. 06, 2018
Technical article Six weird ways to design with a brushless-DC driver Aug. 28, 2017
More literature Stellaris DK-LM4F-DRV8312 Aug. 30, 2012
More literature Stellaris® LM4F211 controlCARD Aug. 23, 2012
More literature Stellaris® DK-LM3S-DRV8312 Development Kit Read Me First (Rev. A) Jan. 25, 2012
User guide Stellaris® DK-LM3S-DRV8312 Development Kit User's Manual Dec. 06, 2011
More literature Stellaris® MDL-LM3S818CNCD Dec. 05, 2011
Application note InstaSPIN(tm) BLDC Lab Nov. 15, 2011
More literature Stellaris® DK-LM3S-DRV8312 Nov. 03, 2011
Application note Sensored 3-Phase BLDC Motor Control Using MSP430 Jul. 20, 2011

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

document-generic User guide

The BOOSTXL-DRV8301 is 10A, 3-phase brushless DC drive stage based on the DRV8301 pre-driver and CSD18533Q5A NexFET™ power MOSFET. The module has 3x low side current sense amps (2 internal to DRV8301, 1 external). The module also has a 1.5A step down buck converter, is fully protected with (...)

  • 6 to 24V supply input
  • Supports up to 14A peak, 10A continuous current output
  • Supports voltage and current feedback for InstaSPIN-FOC sensorless control solution
  • Complete brushless DC drive stage in ultra small form factor (2.2” x 2.3”)
  • 3x low side current sense amps, 6x Power FETs (< 6.5mΩ) & (...)

DRV8312-C2-KIT is a DIMM100 controlCARD based motherboard evaluation module.  The DRV8312-C2-KIT is a motor control evaluation kit for spinning three-phase brushless DC (BLDC) and brushless AC (BLAC) - often referred to as permanent magnet synchronous (PMSM) - motors. The DRV8312-C2-KIT is a (...)


Hardware Features

  • Three phase inverter baseboard with interface to accept DIMM100 controlCARDs
  • DRV8312 three phase inverter integrated power module base board supporting up to 50V and 3.5A continuous
  • Includes the following controlCARDs

Software development

InstaSPIN™-BLDC Solution
INSTASPIN-BLDC In keeping with TI’s philosophy of making motor control more accessible and easier to use by design engineers, TI is proud to announce the release of its newest motor control technology, InstaSPIN-BLDC. Targeted at low cost BLDC applications, InstaSPIN-BLDC is a sensorless control technique based (...)

Reference designs

Three-Phase BLDC and PMSM Medium Voltage Motor Control Solution
TIDM-THREEPHASE-BLDC-LC Spin and control three-phase brushless DC (BLDC) and brushless AC (BLAC) motors—or permanent magnet synchronous motors (PMSM)—using sensorless field oriented control (FOC). This design provides high-performance, power-efficient, and cost-effective control for sub-50V, 7A motors, ideal (...)
document-generic Schematic document-generic User guide
Three-Phase Brushless/PMSM Low Current Motor Control Solution with InstaSPIN Software
TIDM-THREEPHASE-BLDC-LC-INST This reference design demonstrates a motor control solution for spinning medium voltage three-phase brushless DC (BLDC) and brushless AC (BLAC) motors- often referred to as permanent magnet synchronous motors (PMSM) - featuring the C2000™ InstaSPIN™ TMS320F28069M microcontroller and the DRV8312 (...)
document-generic Schematic

CAD/CAE symbols

Package Pins Download
HTSSOP (DDW) 44 View options

Ordering & quality

Information included:
  • RoHS
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​