Top

Product details

Parameters

Function Type-C, USB3 Device type Passive switch Power role DRP, Sink, Source Alternate mode No External power path control GPIO, I2C Data role DFP, DRD, UFP USB speed (Mbps) 10000 Rating Catalog Dead battery support Yes Operating temperature range (C) -40 to 85, 0 to 70 Iq (Typ) (uA) 700 open-in-new Find other USB Type-C & USB Power Delivery ICs

Package | Pins | Size

WQFN (RNH) 30 11 mm² 4.5 x 2.5 open-in-new Find other USB Type-C & USB Power Delivery ICs

Features

  • USB Type-C Port Controller with Integrated 2:1 SuperSpeed Mux
  • Compatible to USB Type-C™ Specifications
  • Supports USB 3.1 G1 and G2 up to 10 Gbps
  • Supports up to 15 W of Power Delivery with 3-A Current Advertisement and Detection
  • Mode Configuration
    • Host Only – DFP/Source
    • Device Only – UFP/Sink
    • Dual Role Port - DRP
  • Channel Configuration (CC)
    • Attach of USB Port Detection
    • Cable Orientation Detection
    • Role Detection
    • Type-C Current Mode (Default, Mid, High)
  • V(BUS) Detection and VCONN Support for Active Cables
  • Audio and Debug Accessory Support
  • Supports for Try.SRC and Try.SNK DRP Modes
  • Configuration Control through GPIO and I2C
  • Low Active and Standby Current Consumptions
  • Industrial Temperature Range of –40 to 85°C

All trademarks are the property of their respective owners.

open-in-new Find other USB Type-C & USB Power Delivery ICs

Description

HD3SS3220 is a USB SuperSpeed (SS) 2:1 mux with DRP port controller. The device provides Channel Configuration (CC) logic and 5V VCONN sourcing for ecosystems implementing USB Type-C. The HD3SS3220 can be configured as a Downstream Facing Port (DFP), Upstream Facing Port (UFP) or a Dual Role Port (DRP) making it ideal for any application.

The HD3SS3220, in DRP mode, alternates presenting itself as a DFP or UFP according to the Type-C specifications. The CC logic block monitors the CC1 and CC2 pins for pull-up or pull-down resistances to determine when a USB port has been attached and its port role. Once a USB port has been attached, the CC logic also determines the orientation of the cable and configures the USB SS mux accordingly. Finally, CC logic advertises or detects Type-C current mode – Default, Mid, or High in DFP and UFP modes respectively.

Excellent dynamic characteristics of the integrated mux allow switching with minimum attenuation to the SS signal eye diagram and very little added jitter. The device’s switch paths deploy adaptive common mode voltage tracking resulting identical channel despite different common mode voltage for RX and TX channels.

open-in-new Find other USB Type-C & USB Power Delivery ICs
Download

Technical documentation

= Featured
No results found. Please clear your search and try again. View all 5
Type Title Date
* Datasheet HD3SS3220 USB Type-C DRP Port Controller with SuperSpeed 2:1 MUX datasheet (Rev. C) May 02, 2017
Application notes Schematic Checklist for HD3SS3212 and HD3SS3220 Mar. 31, 2020
User guides HD3SS3220 DFP Dongle Evaluation Module (Rev. A) Nov. 21, 2018
Technical articles How to select the right USB Type-C™ signal switches Mar. 20, 2018
White papers USB Type-C™ represents breakthrough connectivity Dec. 04, 2015

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
$99.00
Description
The HD3SS3220 DFP Dongle EVM is designed to evaluate HD3SS3220 devices for DFP implementations.  This EVM can also be used as a hardware reference design for any implementation using the HD3SS3220 with a USB-C connector.
Features
  • Plug and play design
  • Operates off of the 5V VBUS from the legacy Type A USB connection
  • Can provide VCONN over a CC pin based upon Type C plug orientation and Ra detection
  • The Type-A plug can be connected to a USB legacy Type-Areceptacle for host side connection
  • Support both connection orientations on (...)
EVALUATION BOARDS Download
document-generic User guide
$99.00
Description
The HD3SS3220 UFP Dongle EVM is designed to evaluate HD3SS3220 devices for UFP implementations.  This EVM can also be used as a hardware reference design for any implementation using the HD3SS3220 with a USB-C™ connector.
Features
  • Plug and play design
  • The EVM operates off of the 5V VBUS from the USB-C connection
  • The Type-A receptacle can be used to connect to a USB legacy device.  A USB Type-C™ device can be connected to the USB Type-C receptacle provided on the EVM.
  • A USB Type-C device can be connected to the USB Type-C (...)

Design tools & simulation

SIMULATION MODELS Download
SLLM382.ZIP (66 KB) - S-Parameter Model
SIMULATION MODELS Download
SLYM092.ZIP (27 KB) - IBIS Model
SIMULATION TOOLS Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide

Reference designs

REFERENCE DESIGNS Download
Ultrasound smart probe power supply reference design
TIDA-010057 — Significant technological advancements and high degree of integration in Medical imaging, especially hand-held ultrasound smart probes, are pushing engineers to come up with highly-efficient, noise immune power solutions in a small size. This reference design documents end to end power and data (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
USB Type-C Plug to USB Type-A Receptacle SuperSpeed MUX With UFP Controller Reference Design
TIDA-00891 The TIDA-00891 is designed to evaluate HD3SS3220 devices for UFP implementations. This reference design can also be used as a hardware reference design for any implementation using the HD3SS3220 with a USB-C™ connector.  Reference design files can be provided upon request to aid PCB (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
USB Type-A Plug to USB Type-C Receptacle SuperSpeed MUX With DFP Controller Reference Design
TIDA-00890 The TIDA-00890 Dongle is designed to evaluate HD3SS3220 devices for DFP implementations.  This reference design can also be used as a hardware reference design for any implementation using the HD3SS3220 with a USB-C™ connector.  The layout files can be used as a guideline to (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
WQFN (RNH) 30 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​