INA2134-EP

ACTIVE

Enhanced Product Audio Differential Line Receiver 0dB (G = 1)

Top

Product details

Parameters

Number of channels (#) 2 Gain (V/V) 1 CMRR Rs=0Ω (Min) (dB) 74 THD + N @ 1 kHz (%) 0.0005 Noise floor (RTO, 20 kHz BW) (dBu) -100 Differential input impedance (kΩ) 50 Common mode input impedance (kΩ) 25 Slew rate (Typ) (V/us) 14 Supply voltage (Max) (V) 36 Supply voltage (Min) (V) 8 Iq per channel (Typ) (mA) 2.4 Small-Signal bandwidth (Typ) (MHz) 3.1 Operating temperature range (C) -55 to 125 open-in-new Find other Audio line receivers

Package | Pins | Size

SOIC (D) 14 52 mm² 8.65 x 6 open-in-new Find other Audio line receivers

Features

  • Single and Dual Versions
  • Low Distortion: 0.0005% at f = 1 kHz
  • High Slew Rate: 14 V/ms
  • Fast Settling Time: 3 ms to 0.01%
  • Wide Supply Range: ±4 V to ±18 V
  • Low Quiescent Current: 3.1 mA max
  • High CMRR: 90 dB
  • Fixed Gain = 0 dB (1V/V)
  • Dual 14-Pin SOIC Package
open-in-new Find other Audio line receivers

Description

The INA2134 is a differential line receiver consisting of high performance op amps with onchip precision resistors. The device is fully specified for high performance audio applications and has excellent ac specifications, including low distortion (0.0005% at 1 kHz) and high slew rate
(14 V/ms), assuring good dynamic response. In addition, wide output voltage swing and high output drive capability allow use in a wide variety of demanding applications. The dual version features completely independent circuitry for lowest crosstalk and freedom from interaction, even when overdriven or overloaded.

The INA2134 on-chip resistors are laser trimmed for accurate gain and optimum common-mode rejection. Furthermore, excellent TCR tracking of the resistors maintains gain accuracy and common-mode rejection over temperature. Operation is guaranteed from ±4 V to ±18 V (8-V to 36-V total supply).

The INA2134 comes in a 14-pin SOIC surface-mount package and is specified for operation over the military temperature range, –55°C to 125°C.

open-in-new Find other Audio line receivers
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 2
Type Title Date
* Datasheet Audio Differential Line Receiver 0 dB (G = 1) datasheet (Rev. C) Mar. 23, 2012
VID INA2134-EP VID V6212613 Jun. 21, 2016

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Design tools & simulation

SIMULATION MODEL Download
SBOM026A.ZIP (57 KB) - PSpice Model
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)

CAD/CAE symbols

Package Pins Download
SOIC (D) 14 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos