NEW

ISO1644

PREVIEW

Hot-swappable, robust-EMC bidirectional I²C Isolators with 3 GPIOs

Top

Product details

Parameters

Serial clock Bi-directional Number of channels (#) 5 Isolation rating (Vrms) 5000 Serial data Bi-directional Operating temperature range (C) -40 to 125 Data rate (Max) (Mbps) 1.7 Surge voltage rating (Vpk) 10000 Supply voltage (Max) (V) 5.5 Supply voltage (Min) (V) 2.25 open-in-new Find other I2C isolators

Package | Pins | Size

SOIC (DW) 16 open-in-new Find other I2C isolators

Features

  • Robust Isolated Bidirectional, I2C Compatible, Communication
    • ISO1640: Bidirectional Isolated SDA and SCL communication
    • ISO1641: Bidirectional Isolated SDA and unidirectional SCL communication
    • ISO1644: Bidirectional Isolated SDA and SCL communication with 3 Unidirectional GPIO channels
    • Hot-Swappable SDA and SCL
  • Bidirectional data transfer up to 1.7 MHz Operation
  • Up to 3 additional unidirectional isolation channels supporting speeds up to 50 Mbps operation
  • Robust isolation barrier with enhanced EMC:
    • >100-year projected lifetime at 450 VRMS working voltage (D-8) and 1500 VRMS working voltage (DW-16)
    • Up to 5000 VRMS isolation rating
    • Up to 10 kV reinforced surge capability
    • ±100 kV/µs typical CMTI
    • ±8 kV IEC-ESD 61000-4-2 contact discharge protection across isolation barrier
    • Same side ±8 kV IEC-ESD unpowered contact discharge on SCL2 and SDA2 (Side 2)
  • Supply range: 3 V to 5.5 V (Side 1) and 2.25 V to 5.5 V (Side 2)
  • Open-Drain Outputs With 3.5-mA (Side 1) and 50-mA (Side 2) Sink Current Capability
  • Max capacitive load: 80 pF (Side 1) and 400 pF (Side 2)
  • 16-SOIC (DW-16) and 8-SOIC (D-8) Package Options
  • –40°C to +125°C Operating Temperature
  • Safety-Related Certifications (planned):
    • UL 1577 Component Recognition Program
    • DIN VDE V 0884-11
    • IEC 62368-1, IEC 61010-1, IEC 60601-1 and GB4943.1-2011 certifications
open-in-new Find other I2C isolators

Description

The ISO1644,ISO1640 and ISO1641 (ISO164x) devices are hot swappable, low-power, bidirectional isolators that are compatible with I2C interfaces. The ISO164x supports UL 1577 isolation ratings of 5000 VRMS in the 16-DW package, and 3000 VRMS in the 8-D package. Each I2C isolation channel in this low emissions device has a logic input and open drain output separated by a double capacitive silicon dioxide (SiO2) insulation barrier. The ISO1644 intregrates 3 unidirectional CMOS isolation channels which can be used for static GPIO isolation or to isolate a Serial Peripheral Interface (SPI) bus. This family includes basic and reinforced insulation devices certified by VDE, UL, CSA, TUV and CQC. The ISO1644 and ISO1640 has two isolated bidirectional channels for clock and data lines while the ISO1641 has a bidirectional data and a unidirectional clock channel. The ISO164x family integrates logic required to support bidirectional channels, providing a much simpler design and smaller footprint when compared to optocoupler-based solutions.

open-in-new Find other I2C isolators
Download
Similar products you might be interested in
open-in-new Compare products
Similar functionality to the compared device.
NEW ISO1640 ACTIVE Hot-swappable, robust-EMC bidirectional I2C isolator with bidirectional clock Hot-swappable, robust-EMC bidirectional I²C isolator without GPIOs

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 5
Type Title Date
* Data sheet ISO164x Hot-Swappable Bidirectional I2C Isolators with Enhanced EMC and GPIOs datasheet (Rev. C) Jun. 11, 2021
More literature ISO1644DWEVM EU RoHS Declaration of Conformity (DoC) Jun. 02, 2021
User guide ISO1644DWEVM Reinforced Isolated I2C With GPIOs Evaluation Module Jun. 01, 2021
Application note How Do Isolated I2C Buffers with Hot-Swap Capability and IEC ESD Improve ... Mar. 25, 2021
Technical article Top 6 design questions about I2C isolators Mar. 13, 2019

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
document-generic User guide
49
Description

ISO1644DWEVM is an evaluation module used to help designers evaluate the ISO1642, ISO1643, and ISO1644 devices' performance for quick development and analysis of data transmision systems using TI's ISO1642, ISO1643, and ISO1644 isolated I²C devices with general purpose input and output channels (...)

Features
  • Isolated, bidirectional, I²C-compatible communication with unidirectional GPIO channels
  • For evaluation of ISO1642, ISO1643, and ISO1644 devices in DW packages
  • Supply voltage and level translation Range: 3 V to 5.5 V on side 1 and 2.25 V to 5.5 V on side 2
  • Test points and headers for stand-alone (...)

CAD/CAE symbols

Package Pins Download
SOIC (DW) 16 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos