1-Mbps, full-duplex, 2.5-kVrms isolated RS-485 & RS-422 transceiver

Top

Product details

Parameters

Duplex Full Data rate (Max) (Mbps) 1 Isolation rating (Vrms) 2500 Integrated transformer driver No Operating temperature range (C) -40 to 85, -55 to 125 Fail safe Idle, Open, Short HBM ESD (kV) 16 Surge voltage capability (Vpk) 4000 open-in-new Find other Isolated RS-485 transceivers

Package | Pins | Size

SOIC (DW) 16 77 mm² 10.3 x 7.5 open-in-new Find other Isolated RS-485 transceivers

Features

  • Meets or Exceeds TIA/EIA RS-485 Requirements
  • 1/8 Unit Load – Up to 256 Nodes on a Bus
  • Signaling Rates up to 1 Mbps
  • Thermal Shutdown Protection
  • Low Bus Capacitance – 16 pF (Typical)
  • 50 kV/µs Typical Transient Immunity
  • Fail-safe Receiver for Bus Open, Short, Idle
  • 3.3-V Inputs are 5-V Tolerant
  • Safety and Regulatory Approvals
    • 4000-VPK VIOTM, 560-VPK VIORM per DIN V VDE
      V 0884-10 (VDE V 0884-10):2006-12 and DIN EN 61010-1
    • 2500 VRMS Isolation Rating per UL 1577
    • 2500 VRMS Isolation Rating per CSA CA5A and IEC 60950-1
  • APPLICATIONS
    • Security Systems
    • Chemical Production
    • Factory Automation
    • Motor and Motion Control
    • HVAC and Building Automation Networks
    • Networked Security Stations

All other trademarks are the property of their respective owners

open-in-new Find other Isolated RS-485 transceivers

Description

The ISO15 is an isolated half-duplex differential line transceiver while the ISO35 is an isolated full-duplex differential line driver and receiver for TIA/EIA 485/422 applications. The ISO15M and ISO35M have extended ambient temperature ratings of –55°C to 125°C while the ISO15 and ISO35 are specified over –40°C to 85°C.

These devices are ideal for long transmission lines because the ground loop is broken to allow for a much larger common-mode voltage range. The symmetrical barrier of the device is tested to provide isolatlion of 4000 VPK per VDE and 2500 VRMS per UL and CSA between the bus-line transceiver and the logic-level interface.

Any cabled I/O can be subjected to electrical noise transients from various sources. These noise transients can cause damage to the transceiver and/or nearby sensitive circuitry if they are of sufficient magnitude and duration. These isolated devices can significantly increase protection and reduce the risk of damage to expensive control circuits.

open-in-new Find other Isolated RS-485 transceivers
Download
Similar products you might be interested in
open-in-new Compare products
Same functionality and pinout but is not an equivalent to the compared device:
ISO1412 ACTIVE EMC protected, 500-Kbps, full-duplex, 5-kVrms isolated RS-485 & RS-422 transceiver This updated device has a higher isolation rating, increased transceiver EMC protection, wider supply range and stronger CMTI

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 10
Type Title Date
* Datasheet ISOx5 Isolated 3.3-V Half- and Full-Duplex RS-485 Transceivers datasheet (Rev. G) Mar. 09, 2015
More literature CSA Certification (Rev. P) Nov. 19, 2019
More literature VDE certificate for basic isolation for DIN VDE V 0884-11:2017-01 (Rev. Q) Sep. 20, 2019
More literature UL Certification (Rev. N) Jul. 30, 2019
Application notes Isolated RS-485 Transceiver Reference Design May 10, 2019
Application notes How to isolate RS-485 for smallest size and highest reliability (Rev. A) Oct. 18, 2018
Application notes How to isolate signal and power for an RS-485 system (Rev. B) Oct. 16, 2018
Application notes Robust isolated RS-485 enables new industrial applications (Rev. A) Aug. 13, 2018
More literature Blog: Top 7 design questions about isolated RS-485 transceivers Aug. 06, 2018
User guides ISO485EVM Isolated RS-485 EVM (Rev. A) Feb. 07, 2018

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
99
Description
The ISO485 evaluation module (EVM) supports the parametric evaluation of RS-485 digital isolators. The EVM will be delivered with an ISO3082DW factory installed on the board. This EVM is intended to be used with the ISO15, ISO35 (SLOS580) and ISO3080, ISO3082, ISO3086 or ISO3088 (SLOS581). If (...)
Features
  • 4000-VPEAK Isolation, 560-Vpeak VIORM
  • UL 1577, IEC 60747-5-2 (VDE 0884, Rev 2
  • Bus-Pin ESD Protection

         – 16 kV HBM Between Bus Pins and GND2

         – 6 kV HBM Between Bus Pins and GND1

  • 1/8 Unit Load – Up to 256 Nodes on a Bus
  • Meets or Exceeds TIA/EIA RS-485 requirements
  • Signaling Rates up to 20 Mbps
  • Thermal Shutdown (...)

Design tools & simulation

SIMULATION MODELS Download
SLLC331.ZIP (12 KB) - IBIS Model
SIMULATION TOOLS Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)

Reference designs

REFERENCE DESIGNS Download
Isolated RS-485 to Wi-Fi Bridge with 24 VAC Power Reference Design
TIDA-00486 The TIDA-00486 TI Design uses Texas Instruments SimpleLink Wi-Fi CC3200 Internet-on-a-chip Wireless MCU module to create a data bridge between an RS-485 network and a Wi-Fi network. An ISO15 transceiver provides an isolated RS-485 interface with up to 2500 VRMS of isolation. The LM5160 (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
SOIC (DW) 16 View options

Ordering & quality

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos