Top

Product details

Parameters

We are not able to display this information. Please refer to the product data sheet.

Package | Pins | Size

TO-CAN (NDS) 2 969 mm² 38.94 x 24.89 open-in-new Find other Linear regulators (LDO)

Features

  • Specified 7-A Peak Output Current
  • Specified 5-A Output Current
  • Adjustable Output Down to 1.2 V
  • Specified Thermal Regulation
  • Current Limit Constant With Temperature
  • P + Product Enhancement Tested
  • Output is Short-Circuit Protected

All trademarks are the property of their respective owners.

open-in-new Find other Linear regulators (LDO)

Description

The LM338-MIL series of adjustable 3-terminal positive voltage regulators is capable of supplying in excess of 5 A over a 1.2-V to 32-V output range. They are exceptionally easy to use and require only 2 resistors to set the output voltage. Careful circuit design has resulted in outstanding load and line regulation, comparable to many commercial power supplies. The LM338-MIL family is supplied in a standard 3-lead transistor package.

A unique feature of the LM338-MIL family is time-dependent current limiting. The current limit circuitry allows peak currents of up to 12 A to be drawn from the regulator for short periods of time. This allows the LM338-MIL to be used with heavy transient loads and speeds start-up under full-load conditions. Under sustained loading conditions, the current limit decreases to a safe value protecting the regulator. Also included on the chip are thermal overload protection and safe area protection for the power transistor. Overload protection remains functional even if the adjustment (ADJ) pin is accidentally disconnected.

Normally, no capacitors are needed unless the device is situated more than 6 inches from the input filter capacitors in which case an input bypass is needed. An output capacitor can be added to improve transient response, while bypassing the adjustment pin increases the ripple rejection of the regulator.

Besides replacing fixed regulators or discrete designs, the LM338-MIL is useful in a wide variety of other applications. Because the regulator is floating and receives only the input-to-output differential voltage, supplies of several hundred volts can be regulated as long as the maximum input to output differential is not exceeded; do not short-circuit output to ground. The part numbers in the LM338-MIL series which have a K suffix are packaged in a standard steel TO-CAN package, while those with a T suffix are packaged in a TO-220 plastic package. The LM338-MIL is rated for TJ = –55°C to 150°C, and the LM338-MIL is rated for TJ = 0°C to 125°C.

open-in-new Find other Linear regulators (LDO)
Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 13
Type Title Date
* Datasheet LM338-MIL 5-Amp Adjustable Regulators datasheet Aug. 28, 2017
Application note A Topical Index of TI LDO Application Notes (Rev. F) Jun. 27, 2019
Technical article LDO basics: capacitor vs. capacitance Aug. 01, 2018
Technical article LDO Basics: Preventing reverse current Jul. 25, 2018
Technical article LDO basics: introduction to quiescent current Jun. 20, 2018
Technical article LDO basics: noise – part 1 Jun. 14, 2017
Application note AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A) May 06, 2013
Application note AN-1148 Linear Regulators: Theory of Operation and Compensation (Rev. B) May 06, 2013
Application note Method For Cal Output Voltage Tolerances in Adj Regs (Rev. A) May 05, 2013
Application note Packaging Limits Range of Linear Regulators May 08, 2010
Application note Digital Designer's Guide to Linear Voltage Regulators & Thermal Mgmt (LDO) (Rev. A) Jun. 04, 2008
Application note Add Kelvin Sensing and Parallel Capability to 3-Terminal Regulators Oct. 03, 2002
Application note Understanding the Terms and Definitions of LDO Voltage Regulators Oct. 21, 1999

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

CAD/CAE symbols

Package Pins Download
TO-3 (NDS) 2 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos