Product details

Vin (Min) (V) 2.97 Vin (Max) (V) 48 Vout (Min) (V) 1.26 Vout (Max) (V) 500 Regulated outputs (#) 1 Switching frequency (Min) (kHz) 100 Switching frequency (Max) (kHz) 1000 Iq (Typ) (mA) 3.7 Features Adjustable Current Limit, Enable, Frequency Synchronization, Light Load Efficiency, Pre-Bias Start-Up, UVLO Adjustable Duty cycle (Max) (%) 85 Rating Automotive Operating temperature range (C) -40 to 125
Vin (Min) (V) 2.97 Vin (Max) (V) 48 Vout (Min) (V) 1.26 Vout (Max) (V) 500 Regulated outputs (#) 1 Switching frequency (Min) (kHz) 100 Switching frequency (Max) (kHz) 1000 Iq (Typ) (mA) 3.7 Features Adjustable Current Limit, Enable, Frequency Synchronization, Light Load Efficiency, Pre-Bias Start-Up, UVLO Adjustable Duty cycle (Max) (%) 85 Rating Automotive Operating temperature range (C) -40 to 125
VSSOP (DGS) 10 9 mm² 3 x 3
  • LM3481QMM are Automotive-Grade Products
    That are AEC-Q100 Grade 1 Qualified (–40°C to
    +125°C Operating Junction Temperature)
  • 10-Lead VSSOP Package
  • Internal Push-Pull Driver With 1-A Peak Current
    Capability
  • Current Limit and Thermal Shutdown
  • Frequency Compensation Optimized With a Capacitor
    and a Resistor
  • Internal Softstart
  • Current Mode Operation
  • Adjustable Undervoltage Lockout With Hysteresis
  • Pulse Skipping at Light Loads
  • Key Specifications
    • Wide Supply Voltage Range of 2.97 V to 48 V
    • 100-kHz to 1-MHz Adjustable and Synchronizable
      Clock Frequency
    • ±1.5% (Over Temperature) Internal
      Reference
    • 10-µA Shutdown Current (Over Temperature)
  • LM3481QMM are Automotive-Grade Products
    That are AEC-Q100 Grade 1 Qualified (–40°C to
    +125°C Operating Junction Temperature)
  • 10-Lead VSSOP Package
  • Internal Push-Pull Driver With 1-A Peak Current
    Capability
  • Current Limit and Thermal Shutdown
  • Frequency Compensation Optimized With a Capacitor
    and a Resistor
  • Internal Softstart
  • Current Mode Operation
  • Adjustable Undervoltage Lockout With Hysteresis
  • Pulse Skipping at Light Loads
  • Key Specifications
    • Wide Supply Voltage Range of 2.97 V to 48 V
    • 100-kHz to 1-MHz Adjustable and Synchronizable
      Clock Frequency
    • ±1.5% (Over Temperature) Internal
      Reference
    • 10-µA Shutdown Current (Over Temperature)

The LM3481 device is a versatile Low-Side N-FET high-performance controller for switching regulators. The device is suitable for use in topologies requiring a low-side FET, such as boost, flyback, SEPIC, and so on. The LM3481 device can be operated at extremely high switching frequencies to reduce the overall solution size. The switching frequency of the LM3481 device can be adjusted to any value between 100kHz and 1MHz by using a single external resistor or by synchronizing it to an external clock. Current mode control provides superior bandwidth and transient response in addition to cycle-by-cycle current limiting. Current limit can be programmed with a single external resistor.

The LM3481 device has built-in protection features such as thermal shutdown, short-circuit protection and overvoltage protection. Power-saving shutdown mode reduces the total supply current to 5 µA and allows power supply sequencing. Internal soft-start limits the inrush current at start-up.

The LM3481 device is a versatile Low-Side N-FET high-performance controller for switching regulators. The device is suitable for use in topologies requiring a low-side FET, such as boost, flyback, SEPIC, and so on. The LM3481 device can be operated at extremely high switching frequencies to reduce the overall solution size. The switching frequency of the LM3481 device can be adjusted to any value between 100kHz and 1MHz by using a single external resistor or by synchronizing it to an external clock. Current mode control provides superior bandwidth and transient response in addition to cycle-by-cycle current limiting. Current limit can be programmed with a single external resistor.

The LM3481 device has built-in protection features such as thermal shutdown, short-circuit protection and overvoltage protection. Power-saving shutdown mode reduces the total supply current to 5 µA and allows power supply sequencing. Internal soft-start limits the inrush current at start-up.

Download

Similar products you might be interested in

open-in-new Compare products
Similar functionality to the compared device.
LM5155-Q1 ACTIVE 2.2-MHz wide VIN, 1.5-A MOSFET driver, non-synchronous boost controller, AEC-Q100 qualified Automotive 4.5-V to 52-V wide input range current mode boost controller.
TPS40210-Q1 ACTIVE 4.5-V to 52-V wide input range current mode boost controller with 700-mV reference voltage For applications requiring lower quiescent current or higher efficiency.

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 6
Type Title Date
* Data sheet LM3481 / -Q1 High-Efficiency Controller for Boost, SEPIC and Flyback DC-DC Converters datasheet (Rev. F) 05 Nov 2012
Technical article How to add overvoltage protection to a synchronous boost controller 17 Sep 2018
Technical article Create a 24W power supply for automotive LED lighting systems 14 Oct 2016
User guide AN-1756 LM3481 Evaluation Board (Rev. A) 01 May 2013
User guide AN-2094 LM3481 SEPIC Evaluation Board (Rev. A) 25 Apr 2013
User guide 330mW AC or DC Tiny Flyback Converter Power Supply Reference Design User Guide 27 Jan 2012

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

LM3481EVAL — High Efficiency Boost Switching Controller Eval Board with 12 Volt Output

The LM3481 is a current mode, low side N channel FET controller. It can be utilized in numerous configurations including a Boost, Flyback or SEPIC (Single Ended Primary Inductor Converter). This evaluation board demonstrates the flexibility of the LM3481 in a boost topology providing 12 volt output (...)

In stock
Limit: 5
Evaluation board

LM3481SEPICEVAL — LM3481 SEPIC Evaluation Board

The LM3481 SEPIC evaluation board is designed to provide the design engineer with a fully functional power converter solution with two output voltage options. It produces a selectable output voltage of 12 V at 1.25A or 5V at 3A. The switching frequency for the converter is set to 500 kHz. The (...)

In stock
Limit: 5
Simulation model

LM3481 TINA-TI Load Transient Reference Design (Rev. C)

SNVM229C.TSC (600 KB) - TINA-TI Reference Design
Simulation model

LM3481 TINA-TI TRANSIENT SPICE MODEL (Rev. C)

SNVM230C.ZIP (29 KB) - TINA-TI Spice Model
Simulation model

LM3481 TINA-TI Steady State Reference Design (Rev. B)

SNVM418B.TSC (600 KB) - TINA-TI Reference Design
Simulation model

LM3481 Unencrypted PSpice Transient Model (Rev. D)

SNVM713D.ZIP (117 KB) - PSpice Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Calculation tool

FLYBUCK-FLYBACK-DESIGN-CALC — Fly-Buck and Flyback Topology Selector

This tool helps a power supply engineer to select the right isolated DC-DC topology based on the specifications. Depending on the topology chosen, the calculator also recommends the right IC for the design.
Many TI reference designs include the LM3481-Q1

Use our reference design selection tool to review and identify designs that best match your application and parameters.

Package Pins Download
VSSOP (DGS) 10 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos