Product details


Vin (Min) (V) 3.5 Vin (Max) (V) 36 Vout (Min) (V) 1 Vout (Max) (V) 34 Iout (Max) (A) 6 Iq (Typ) (uA) 15 Switching frequency (Min) (kHz) 350 Switching frequency (Max) (kHz) 2200 Features Enable, Forced PWM, Frequency Synchronization, Light Load Efficiency, Over Current Protection, Power Good, Pre-Bias Start-Up, Synchronous Rectification, Tracking, UVLO Fixed, Wettable Flanks Package Operating temperature range (C) -40 to 125 Rating Catalog Regulated outputs (#) 1 open-in-new Find other Buck converters (integrated switch)

Package | Pins | Size

WQFN (RNP) 30 24 mm² 6 x 4 open-in-new Find other Buck converters (integrated switch)


  • New product available: LM61460 60-V, 6-A synchronous converter
  • Synchronous rectification
  • Wettable flanks QFN package (WQFN)
  • Low quiescent current
    • 0.8 µA in shutdown (typical)
    • 15 µA in active mode with no load (typical)
  • Wide voltage conversion range:
    • tON-MIN = 60 ns (typical)
    • tOFF-MIN = 70 ns (typical)
  • Low MOSFET ON-resistance:
    • RDS_ON_HS = 53 mΩ (typical)
    • RDS_ON_LS = 31 mΩ (typical)
  • External bias input to improve efficiency
  • Pin-selectable auto mode or forced PWM operation
  • Adjustable frequency range: 350 kHz to 2.2 MHz
  • Synchronizable to external clock
  • Internal compensation
  • Power-good flag
  • Precision enable to program system UVLO
  • Flexible soft-start features:
    • Start-up into pre-biased load
    • Fixed or adjustable soft-start time
    • Output voltage tracking
  • Cycle-by-cycle current limiting
  • Short-circuit protection with hiccup mode
  • Create a custom design with the WEBENCH® power designer using LM73605 or LM73606
open-in-new Find other Buck converters (integrated switch)


The LM73605 and LM73606 family of devices are easy-to-use synchronous step-down DC/DC converters capable of driving up to 5 A or 6 A of load current from a supply voltage ranging from 3.5 V to 36 V. The LM73605 and LM73606 provide exceptional efficiency and output accuracy in a very small solution size. Peak current-mode control is employed. Additional features such as adjustable switching frequency, synchronization to an external clock, power-good flag, precision enable, adjustable soft start, and tracking provide both flexible and easy-to-use solutions for a wide range of applications. Automatic frequency foldback at light load improves efficiency over the entire load range. Protection features include thermal shutdown, cycle-by-cycle current limiting, and short-circuit protection. The devices are pin-to-pin compatible for easy current scaling. The new product, LM61460-Q1, offers higher efficiency, lower stand-by quiescent current, and improved EMI performance. See the device comparison table to compare specifications. Start a Webench design with LM61460-Q1. Use the LMZM33606 module for faster time to market.

open-in-new Find other Buck converters (integrated switch)
Similar products you might be interested in
open-in-new Compare products
Same functionality with different pin-out to the compared device.
LM61460 ACTIVE 3-V to 36-V, 6-A, Low-EMI synchronous step-down converter 3-V to 36-V, 6-A, low-noise synchronous step-down converter.

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 6
Type Title Date
* Data sheet LM73605/LM73606 3.5-V to 36-V, 5-A or 6-A Synchronous Step-Down Voltage Converter datasheet (Rev. A) Jul. 21, 2017
Selection guide Buck Converter Quick Reference Guide (Rev. B) Apr. 08, 2021
User guide Automotive Wide-VIN to Point-of-Load Power Supply Reference Design (Rev. A) Mar. 26, 2020
Technical article Minimize the impact of the MLCC shortage on your power application Mar. 29, 2019
White paper Power modules for lab instrumentation Oct. 18, 2018
User guide LM73605/LM73606 EVM User's Guide Sep. 20, 2017

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

document-generic User guide

The LM73606EVM-5V-400K evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LM73606 synchronous step-down voltage converter. The EVM operates from 6V to 36V input and provides a 5V output voltage with 6A maximum load current.

  • High Efficiency at light loads and heavy loads
  • Synchronous Rectification
  • Wide-Input Voltage Range
  • Auto mode or FPWM mode
  • Frequency Synchronization
  • Low Quiescent Current

Design tools & simulation

SNVMBE4.ZIP (8 KB) - PSpice Model
SNVMBE5.ZIP (240 KB) - PSpice Model
SNVMBL7.ZIP (4 KB) - TINA-TI Reference Design
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SNVC227.ZIP (40 KB)

Reference designs

Automotive wide-VIN to point-of-load power supply with front-end circuit protection reference design
PMP15023 This automotive point-of-load power supply reference design features complete front-end protection in a small overall solution size. The system can clamp fast high-voltage electrical transients and maintain operation through these events. It can also properly respond to a reverse battery polarity (...)
document-generic Schematic document-generic User guide
High efficiency power supply architecture reference design for protection relay processor module
TIDA-010011 — This reference design showcases various power architectures for generating multiple voltage rails for an application processor module, requiring >1A load current and high efficiency . The required power supply is generated using 5-, 12- or 24-V DC input from the backplane. Power supplies are (...)
document-generic Schematic document-generic User guide
Automotive USB Type-C™ DFP 5V 3A + USB Type-A 5V 2.4A Charger Reference Design
PMP40286 — PMP40286 is a dual port car charger reference design.  The output goes to a 5V 3A USB Type-C™ port and a 5V 2.4A USB type-A port. The USB Type-C port can be backwards compliant with BC1.2 and DCP configurations. The type-A port is capable of compensating for the effects on voltage droop (...)
document-generic Schematic document-generic User guide
Automotive Dual Port USB Type-C™ DFP 5V 3A Charger Reference Design
PMP40285 — PMP40285 is a dual port USB Type-C™ charger reference design. This design takes an automotive input voltage, the output goes to two USB Type-C port. Each of these ports supplies 5V 3A for USB Type-C™ device. The design is fully compliant with USB type C and backwards compliant with BC1.2 (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
WQFN (RNP) 30 View options

Ordering & quality

Information included:
  • RoHS
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​