LMC6762

ACTIVE

Dual Micro-Power Rail-to-Rail Input CMOS Comparator with Push-Pull Output

Top

Product details

Parameters

Number of channels (#) 2 Output type Push-pull Propagation delay time (µs) 4 Vs (Max) (V) 15 Vs (Min) (V) 2.7 Vos (offset voltage @ 25 C) (Max) (mV) 5 Iq per channel (Typ) (mA) 0.006 Input bias current (+/-) (Max) (nA) 0.0004 Rail-to-rail No Rating Catalog Operating temperature range (C) -40 to 85 Features VICR (Max) (V) 15.2 VICR (Min) (V) -0.2 open-in-new Find other Comparators

Package | Pins | Size

SOIC (D) 8 19 mm² 4.9 x 3.9 open-in-new Find other Comparators

Features

  • (Typical Unless Otherwise Noted)
  • Low Power Consumption (Max): IS = 10 μA/comp
  • Wide Range of Supply Voltages: 2.7V to 15V
  • Rail-To-Rail Input Common Mode Voltage Range
  • Rail-To-Rail Output Swing (Within 100 mV of the Supplies, @ V+ = 2.7V, and ILOAD = 2.5 mA)
  • Short Circuit Protection: 40 mA
  • Propagation Delay (@ V+ = 5V, 100 mV Overdrive): 4 μs

All trademarks are the property of their respective owners.

open-in-new Find other Comparators

Description

The LMC6762 is an ultra low power dual comparator with a maximum supply current of 10 μA/comparator. It is designed to operate over a wide range of supply voltages, from 2.7V to 15V. The LMC6762 has ensured specifications at 2.7V to meet the demands of 3V digital systems.

The LMC6762 has an input common-mode voltage range which exceeds both supplies. This is a significant advantage in low-voltage applications. The LMC6762 also features a push-pull output that allows direct connections to logic devices without a pull-up resistor.

A quiescent power consumption of 50 μW/amplifier (@ V+ = 5V) makes the LMC6762 ideal for applications in portable phones and hand-held electronics. The ultra-low supply current is also independent of power supply voltage. Ensured operation at 2.7V and a rail-to-rail performance makes this device ideal for battery-powered applications.

Refer to the LMC6772 datasheet for an open-drain version of this device.

open-in-new Find other Comparators
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 4
Type Title Date
* Datasheet LMC6762 Dual MicroPower Rail-To-Rail Input CMOS Comparator with Push-Pull Output datasheet (Rev. D) Mar. 26, 2013
E-book The Signal e-book: A compendium of blog posts on op amp design topics Mar. 28, 2017
More literature Die D/S LMC6762 MDA Dual Micro-Pwr Rail-Rail Input Cmos Compw/ Push-Pull Output Sep. 28, 2012
Technical articles Op Amps used as Comparators—is it okay? Mar. 14, 2012

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Design tools & simulation

SIMULATION MODEL Download
SNOM174.ZIP (4 KB) - PSpice Model
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOL Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)

Reference designs

REFERENCE DESIGNS Download
Reference design synchronizing data converter DDC and NCO features for multi-channel RF systems
TIDA-010122 — This reference design provides the solution for synchronization design challenges associated with emerging 5G adapted applications like massive multiple input multiple output (mMIMO), phase array RADAR and communication payload. The typical RF front end contains antenna, low noise amplifier (LNA (...)
document-generic Schematic
REFERENCE DESIGNS Download
12.8-GSPS analog front end reference design for high-speed oscilloscope and wide-band digitizer
TIDA-01028 — This reference design provides a practical example of interleaved RF-sampling analog-to-digital converters (ADCs) to achieve a 12.8-GSPS sampling rate. This is achieved by time-terleaving two RF-sampling ADCs. Interleaving requires a phase shift between the ADCs, which this reference design achieves (...)
document-generic Schematic
REFERENCE DESIGNS Download
Direct RF-Sampling Radar Receiver for L-, S-, C-, and X-Band Using ADC12DJ3200 Reference Design
TIDA-01442 The TIDA-01442 reference design utilizes the ADC12DJ3200 evaluation module (EVM) to demonstrate a direct RF-sampling receiver for a radar operating in HF, VHF, UHF, L-, S-, C-, and part of X-band. The wide analog input bandwidth and high sampling rate (6.4 GSPS) of the analog-to-digital (...)
document-generic Schematic
REFERENCE DESIGNS Download
Scalable 20.8 GSPS reference design for 12 bit digitizers
TIDA-010128 — This reference design describes a 20.8 GSPS sampling system using RF sampling analog-to-digital converters (ADCs) in time interleaved configuration. Time interleaving method is a proven and traditional way of increasing sample rate, however, matching individual ADCs offset, gain and sampling time (...)
document-generic Schematic
REFERENCE DESIGNS Download
Low noise power-supply reference design maximizing performance in 12.8 GSPS data acquisition systems
TIDA-01027 — This reference design demonstrates an efficient, low noise 5-rail power-supply design for very high-speed DAQ systems capable of > 12.8 GSPS. The power supply DC/DC converters are frequency synchronized and phase-shifted in order to minimize input current ripple and control frequency content (...)
document-generic Schematic
REFERENCE DESIGNS Download
Flexible 3.2-GSPS multi-channel AFE reference design for DSOs, radar and 5G wireless test systems
TIDA-01022 — This high speed multi-channel data capture reference design enables optimum system performance. System designers needs to consider critical design parameters like clock jitter and skew for high speed multi-channel clock generation, which affects overall system SNR, SFDR, channel to channel skew and (...)
document-generic Schematic
REFERENCE DESIGNS Download
RF Sampling 4-GSPS ADC Reference Design with 8-GHz DC-Coupled Differential Amplifier
TIDA-00431 Wideband radio frequency (RF) receivers allow greatly increased flexibility in radio designs. The wide instantaneous bandwidth allows flexible tuning without changing hardware and the ability to capture multiple channels at widely separated frequencies.

This reference design describes a wideband RF (...)

document-generic Schematic
REFERENCE DESIGNS Download
50-Ohm 2-GHz Oscilloscope Front-end Reference Design
TIDA-00826 This reference design is part of an analog front-end for 50Ω-input oscilloscope application. System designers can readily use this evaluation platform to process input signals from DC to 2 GHz in both frequency-domain and time-domain applications.
document-generic Schematic

CAD/CAE symbols

Package Pins Download
SOIC (D) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos