Top

Product details

Parameters

Function Config I/O Power consumption (mW) 235 Data rate (Max) (Gbps) 2.97 Control interface Pin, SPI Operating temperature range (C) -40 to 85 open-in-new Find other Serial digital interface (SDI) ICs

Package | Pins | Size

TLGA (NPD) 48 49 mm² 7 x 7 open-in-new Find other Serial digital interface (SDI) ICs

Features

  • ST 424, ST 292, ST 344, and ST 259 Compliant
  • Supports DVB-ASI at 270 Mbps
  • Data Rates: 125 Mbps to 2.97 Gbps when Receiving (DC to 2.97 Gbps when Driving Cable)
  • Equalizes up to 120 Meters of Belden 1694A at 2.97 Gbps, up to 200 Meters of Belden 1694A at 1.485 Gbps, or up to 400 Meters of Belden 1694A at 270 Mbps
  • Integrated Return Loss Network (No External Components Required)
  • Power Saving Modes
  • Cable Driver Selectable Slew Rate
  • Internally Terminated 100-Ω LVDS Receiver Outputs With Programmable Common Mode Voltage and Swing
  • Programmable Launch Amplitude Optimization for Receiver
  • Cable Length Indication
  • Single 3.3-V Supply Operation
  • 48-Pin Laminate TLGA Package
  • Industrial Temperature Range: −40°C to 85°C

All trademarks are the property of their respective owners.

open-in-new Find other Serial digital interface (SDI) ICs

Description

The LMH0387 3 Gbps HD/SD SDI Configurable I/O Adaptive Cable Equalizer / Cable Driver provides a single chip interface to a BNC. The device can be configured either in the input mode as an equalizer to receive data over coaxial cable or in the output mode as a cable driver to transmit data over coaxial cable. The same I/O pin is used both for the input and the output functions of the device, allowing the system designer the flexibility to use a BNC attached to the device as either an input or an output.

The device operates over a wide range of data rates from 125 Mbps to 2.97 Gbps (DC to 2.97 Gbps when driving cable) and supports ST 424, ST 292, ST 344, and ST 259. The return loss network is integrated within the device so no external components are required to meet the SMPTE return loss specification. The LMH0387 offers designers flexibility in system design and quicker time to market.

In the input mode, the LMH0387 features include a power-saving sleep mode, programmable output common mode voltage and swing, cable length indication, launch amplitude optimization, input signal detection, and an SPI interface. In the output mode, the LMH0387 features include two selectable slew rates for ST 424 / 292 and ST 259 compliance, and output driver power-down control.

The device is available in a 7-mm × 7-mm 48-pin laminate Thin Laminate Grid Array (TLGA) Package.

open-in-new Find other Serial digital interface (SDI) ICs
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 10
Type Title Date
* Datasheet LMH0387 3 Gbps HD/SD SDI Configurable I/O Adaptive Cable Equalizer / Cable Driver datasheet (Rev. H) Aug. 31, 2015
Application notes Simplifying 4K SDI Video Design with a Bidrectional I/O Oct. 31, 2017
Selection guides Broadcast and Professional Video Interface Solutions (Rev. E) Apr. 05, 2017
Application notes AN-1943 Understanding Serial Digital Video Bit Rates (Rev. A) Apr. 26, 2013
Application notes AN-2145 Power Considerations for SDI Products (Rev. B) Apr. 26, 2013
Application notes AN-2146 Power Design for SDI and Other Noise-Sensitive Devices (Rev. A) Apr. 26, 2013
Application notes AN-2156 Configuring the LMH0387 for an Equalizer-Only Application (Rev. A) Apr. 26, 2013
User guides 3 Gbps HD SD SDI Configurable IO Adaptive Equalizer Driver Eval Bd User Guide Jan. 26, 2012
Application notes High-Speed Board Layout Challenges in FPGA/SDI Sub-Systems Nov. 12, 2009
User guides Broadcast Video Owner's Manual Nov. 17, 2006

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Software development

SUPPORT SOFTWARE Download
Analog Launchpad software
ALP The Analog Launchpad (ALP) software is an interactive graphical user interface (GUI) software platform to evaluate TI FPD-Link™ serializers and deserializers (SerDes). The ALP software enables device- and system-level evaluation with powerful built-in features, including:
  • Local and remote device (...)

Design tools & simulation

SIMULATION MODELS Download
SNLM197.ZIP (1588 KB) - IBIS Model
SIMULATION TOOLS Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOLS Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
document-generic User guide
SCHEMATICS Download
SNLC011.ZIP (34 KB)

CAD/CAE symbols

Package Pins Download
TLGA (NPD) 48 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos