Top

Product details

Parameters

2nd harmonic (dBc) 84 3rd harmonic (dBc) 83 @ MHz 200 Acl, min spec gain (V/V) 0.53 Architecture VGA, Fully Differential ADC Driver BW @ Acl (MHz) 1400 Gain (Max) (dB) 26 Gain (Min) (dB) -5.5 Step size (dB) 0.5 Iq per channel (Typ) (mA) 113 Product type RF VGA Number of channels (#) 2 Operating temperature range (C) -40 to 85 Total supply voltage (Max) (+5V=5, +/-5V=10) 5.25 Total supply voltage (Min) (+5V=5, +/-5V=10) 4.75 Vs (Min) (V) 4.75 Vs (Max) (V) 5.25 open-in-new Find other RF VGAs

Package | Pins | Size

WQFN (RTV) 32 25 mm² 5 x 5 open-in-new Find other RF VGAs

Features

  • OIP3 of 48.5 dBm at 200 MHz
  • Maximum Voltage Gain of 26 dB
  • Gain Range: 31.5 dB with 0.5-dB Step Size
  • Channel Gain Matching of ±0.04 dB
  • Noise Figure: 7.3 dB at Maximum Gain
  • –3-dB Bandwidth of 1200 MHz
  • Low Power Dissipation
  • Independent Channel Power Down
  • Three Gain Control Modes:
    • Parallel Interface
    • Serial Interface (SPI)
    • Pulse Mode Interface
  • Temperature Range: –40°C to +85°C
  • Thermally-Enhanced, 32-Pin WQFN Package
open-in-new Find other RF VGAs

Description

The LMH6521 contains two high performance, digitally controlled variable gain amplifiers (DVGA).

Both channels of the LMH6521 have an independent, digitally controlled attenuator followed by a high linearity, differential output amplifier. Each block has been optimized for low distortion and maximum system design flexibility. Each channel has a high speed power down mode.

The internal digitally controlled attenuator provides precise 0.5-dB gain steps over a 31.5-dB range. Serial and parallel programming options are provided. Serial mode programming uses the SPI interface. A pulse mode is also offered where simple up or down commands can change the gain one step at a time.

The output amplifier has a differential output allowing 10-VPPD signal swings on a single 5-V supply. The low impedance output provides maximum flexibility when driving filters or analog to digital converters.

open-in-new Find other RF VGAs
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 18
Type Title Date
* Datasheet LMH6521 High Performance Dual DVGA datasheet (Rev. E) Aug. 23, 2016
White papers The Signal e-book: A compendium of blog posts on op amp design topics Mar. 28, 2017
Selection guides TI Components for Aerospace and Defense Guide (Rev. E) Mar. 22, 2017
User guides Using the LMH6521 in DC Coupled Applications Design Guide Jan. 08, 2015
Technical articles Part 2 - Mitigating common mode noise Nov. 03, 2014
Technical articles When to use an RF choke vs an inductor Apr. 23, 2014
User guides TSW1265 Dual-Wideband RF-to-Digital Receiver Design Guide Sep. 03, 2013
User guides TSW1266 Wideband RF-to-Digital Complex Receiver-Feedback Signal Chain Sep. 03, 2013
Technical articles A closer look at special function amplifiers Aug. 15, 2013
Technical articles How to determine power gain and voltage gain in RF systems Jul. 10, 2013
Application notes AN-1719 Noise Figure Analysis Fully Differential Amplifier (Rev. A) May 01, 2013
User guides AN-2045 LMH6521EVAL Evaluation Board (Rev. A) May 01, 2013
Application notes AN-2235 Ckt Brd Design for LMH6517/21/22 & Other H-Sp IF/RF F Amp (Rev. A) May 01, 2013
Application notes Between the Amplifier and ADC: Managing Filter Loss in Communications Systems (Rev. B) Apr. 26, 2013
Application notes Drivng HSpeed ADCs w/LMH6521 DVGA for High IF AC-Coupled Apps (Rev. A) Apr. 26, 2013
Application notes Using High Speed Diff Amp to Drive ADCs (Rev. A) Apr. 26, 2013
More literature Featured High Speed Differential Amplifiers Oct. 23, 2012
Application notes A Walk Along the Signal Path (High-Speed Signal Path) Mar. 30, 2005

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
399
Description

The LMH6521EVAL evaluation board is designed to aid in the characterization of TI`s High Speed LMH6521 High Performance Dual (DVGA). Use the evaluation board as a guide for high frequency layout and as a tool to aid in device testing and characterization.

Features

Contents:

  • Assembled LMH6521EVAL Board
EVALUATION BOARDS Download
document-generic User guide
499
Description

The TSW1265EVM is a wideband dual receiver reference design and evaluation platform. The signal chain allows conversion from RF to bits using a dual-channel downconverter mixer, the LMH6521 dual-channel DVGA, and the ADS4249 14-bit 250-MSPS ADC. The TSW1265EVM also includes the LMK04800 dual-PLL (...)

Features
  • Complete RF-to-bits receiver evaluation platform utilizing a dual-channel downconverter, LMH6521 DVGA, and ADS4249 14-bit 250-MSPS ADC
  • The LMK04800 clock generator and jitter-cleaning provides a complete onboard clocking solution
  • A software GUI is provided to configure the ADS4249, LMK04800, and (...)
  • EVALUATION BOARDS Download
    document-generic User guide
    Description

    The TSW16DX370EVM is a reference design board used to evaluate the high performance receiver IF super-heterodyne subsystem solution including the following products from Texas Instruments:

    • TRF37B32 dual down-converting mixer with integrated IF amplifier
    • LMH6521 dual digitally controlled variable gain (...)
    Features
    • High linearity, low noise Superheterodyne sub-system reference design
    • Wide RF input range and greater than 100MHz of IF bandwidth
    • Quickly evaluate ADC performance through High Speed Data Converter Pro software
    • Simple connection to TSW14J56EVM data capture card or direct connection to FMC based Xilinx (...)

    Design tools & simulation

    SIMULATION MODELS Download
    SNOJ009.ZIP (46 KB) - Spice Model
    SIMULATION MODELS Download
    SNOM321.TSC (286 KB) - TINA-TI Reference Design
    SIMULATION MODELS Download
    SNOM322.ZIP (8 KB) - TINA-TI Spice Model

    Reference designs

    参考设计 Download
    700–2700 MHz Dual-Channel Receiver with 16-Bit ADC and 100 MHz IF Bandwidth Reference Design
    TIDA-00360 The increasing demand on wireless networks to provide faster data links to customers has driven transceiver hardware to increasingly demanding performance with enough bandwidth to support the largest standardized multi-carrier frequency bands (with band aggregation in some cases) and enough receiver (...)
    document-generic Schematic document-generic User guide
    参考设计 Download
    Equalization Optimization of a JESD204B Serial Link Reference Design
    TIDA-00353 Employing equalization techniques is an effective way of compensating for channel loss in JESD204B high speed serial interfaces for data converters. This reference design features the ADC16DX370, a dual 16-bit, 370 MSPS analog-to-digital converter (ADC) that utilizes de-emphasis equalization to (...)
    document-generic Schematic document-generic User guide
    参考设计 Download
    Wideband RF-to-Digital Complex Receiver-Feedback Signal Chain
    TIDA-00074 This is a wideband complex-receiver reference design and evaluation platform that is ideally suited for use as a feedback receiver for transmitter digital predistortion. The EVM signal chain is ideal for high intermediate-frequency (IF) complex-feedback applications and contains a complex (...)
    document-generic Schematic document-generic User guide
    参考设计 Download
    Dual-Wideband RF-to-Digital Receiver Design
    TIDA-00073 The TSW1265EVM is an example design of a wideband RF to digital dual receiver solution capable of digitizing up to 125MHz of spectrum. The system provides a reference on how to use the ADS4249, LMH6521, LMK0480x, and a dual mixer to achieve this.  This reference EVEM coupled with a capture card (...)
    document-generic Schematic document-generic User guide

    CAD/CAE symbols

    Package Pins Download
    WQFN (RTV) 32 View options

    Ordering & quality

    Support & training

    TI E2E™ forums with technical support from TI engineers

    Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

    If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

    Videos

    Related videos