LMR36006

ACTIVE

4.2-V to 60-V, 0.6-A ultra-small synchronous step-down converter

Top

Product details

Parameters

Vin (Min) (V) 4.2 Vin (Max) (V) 60 Vout (Min) (V) 1 Vout (Max) (V) 57 Iout (Max) (A) 0.6 Regulated outputs (#) 1 Switching frequency (Min) (kHz) 1000 Switching frequency (Max) (kHz) 2100 Features Enable, Light Load Efficiency, Over Current Protection, Power Good, Pre-Bias Start-Up, Synchronous Rectification, Wettable Flanks Package Control mode Current Mode Duty cycle (Max) (%) 98 Type Converter Operating temperature range (C) -40 to 150 Rating Catalog open-in-new Find other Buck converters (integrated switch)

Package | Pins | Size

VQFN-HR (RNX) 12 6 mm² 3 x 2 open-in-new Find other Buck converters (integrated switch)

Features

  • Designed for reliable and rugged applications
    • Input transient protection up to 66 V
    • Junction temperature range –40°C to +150°C
    • Protection features: thermal shutdown, input undervoltage lockout, cycle-by-cycle current limit, hiccup short-circuit protection
    • 0.2-V dropout with 0.6-A load (typical)
  • Suited for scalable industrial power supplies
    • Pin compatible with:
    • 1-MHz, 2.1-MHz frequency options
      • Low power dissipation across load spectrum
        • 87% efficiency at 1 MHz (24VIN, 5VOUT, 0.6A)
        • 92% efficiency at 1 MHz (12VIN, 5VOUT, 0.6A)
        • Increased light load efficiency in PFM
        • Low operating quiescent current of 26 µA
      • Small 2-mm × 3-mm HotRod™ package
      • Solution with few external components
        • LMR36006-Q1 and LMR36015-Q1 available in 400 kHz and 2.1 MHz, adjustable output, and fixed 3.3 VOUT
        • Optimized for ultra low EMI requirements
          • Meets CISPR25 class 5 standard
          • Hotrod™ package minimizes switch node ringing
          • Parallel input path minimizes parasitic inductance
          • Spread spectrum reduces peak emissions
        • Create a custom design using the LMR36006 with the WEBENCH® Power Designer

        All trademarks are the property of their respective owners.

        open-in-new Find other Buck converters (integrated switch)

        Description

        The LMR36006 regulator is an easy-to-use, synchronous, step-down DC/DC converter. With integrated high-side and low-side power MOSFETs, up to 0.6 A of output current is delivered over a wide input voltage range of 4.2 V to 60 V. Tolerance goes up to 66 V. The transient tolerance reduces the necessary design effort to protect against overvoltages and meets the surge immunity requirements of IEC 61000-4-5.

        The LMR36006 uses peak-current-mode control to provide optimal efficiency and output voltage accuracy. Precision enable gives flexibility by enabling a direct connection to the wide input voltage or precise control over device start-up and shutdown. The power-good flag, with built-in filtering and delay, offers a true indication of system status eliminating the requirement for an external supervisor.

        The LMR36006 is in a HotRod™ package which enables low noise, higher efficiency, and the smallest package to die ratio. The device requires few external components and has a pinout designed for simple PCB layout. The small solution size and feature set of the LMR36006 are designed to simplify implementation for a wide range of end equipment, including space critical applications of ultra-small field transmitters and vision sensors.

        open-in-new Find other Buck converters (integrated switch)
    Download

    Technical documentation

    Design & development

    For additional terms or required resources, click any title below to view the detail page where available.

    Hardware development

    EVALUATION BOARDS Download
    document-generic User guide
    $49.00
    Description
    The LMR36006 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR36006 synchronous step-down converter.  The LMR36006 provides exceptional efficiency and accuracy in a very small solution size.
    Features
    • Inegrated synchronous rectification
    • Low operating quiescent current
    • High efficiency at light loads
    • Short minimum on-time
    EVALUATION BOARDS Download
    document-generic User guide
    $49.00
    Description
    The LMR36015 evaluation module (EVM) is a fully assembled and tested circuit for evaluating the LMR36016 synchronous step-down converter.  The LMR36015 provides exceptional efficiency and accuracy in a very small solution size.
    Features
    • Inegrated synchronous rectification
    • Low operating quiescent current
    • High efficiency at light loads
    • Short minimum on-time

    Design tools & simulation

    SIMULATION MODELS Download
    SNVMBI6A.ZIP (8 KB) - PSpice Model
    SIMULATION MODELS Download
    SNVMBI7A.ZIP (150 KB) - PSpice Model
    SIMULATION MODELS Download
    SNVMBQ1.ZIP (165 KB) - PSpice Model
    SIMULATION MODELS Download
    SNVMBQ2.ZIP (8 KB) - PSpice Model
    CALCULATION TOOLS Download
    SNVC234.ZIP (442 KB)

    Reference designs

    REFERENCE DESIGNS Download
    Wide Vin Power Supply Reference Design for Space-Constrained Industrial Sensors
    PMP15040 — This reference design provides an example of how to power FPGAs, ASICs, or MCUs in industrial sensor applications when space-constraints are a primary concern. The wide 6-V to 60-V input voltage range and the use of ultra-small and highly efficient DC/DC converters makes the design well suited for (...)
    document-generic Schematic document-generic User guide
    REFERENCE DESIGNS Download
    Non-isolated power architecture with diagnostics reference design for protection relay modules
    TIDA-010055 — This reference design showcases non-isolated power supply architectures for protection relays with analog input/output and communication modules generated from 5-, 12-, or 24-V DC input. To generate the power supplies the design uses DC/DC converters with an integrated FET, a power module with an (...)
    document-generic Schematic document-generic User guide
    REFERENCE DESIGNS Download
    TUV-assessed digital input reference design for IEC 61508 (SIL-2)
    TIDA-010049 — This 8-channel, group-isolated, digital input module reference design, focuses on applications with the need for industrial functional safety. This design has diagnostics implemented to help detect both permanent and transient random hardware faults. The concept of this input module has been (...)
    document-generic Schematic document-generic User guide
    REFERENCE DESIGNS Download
    Industrial wireless condition monitoring reference design
    TIDA-010012 — Use this reference design to quickly establish a wireless network that connects various types of sensors for condition monitoring directly to the Cloud. Condition Monitoring is based on a regular or permanent recording of the machine condition which is necessary for predictive maintenance. Inputs (...)
    document-generic Schematic document-generic User guide
    REFERENCE DESIGNS Download
    Two-Stage Power Supply Reference Design for Field Transmitters
    PMP15039 — This dual output reference design provides an example of how to power FPGAs, ASICs, or MCUs when space-constraints are a primary concern. The wide 6-V to 60-V input voltage range and the use of ultra-small and highly efficient DC/DC converters makes the design well suited for applications like (...)
    document-generic Schematic document-generic User guide

    CAD/CAE symbols

    Package Pins Download
    VQFN-HR (RNX) 12 View options

    Ordering & quality

    Support & training

    TI E2E™ forums with technical support from TI engineers

    Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

    If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​