Product details

Number of channels (#) 2 Output type Open-collector Propagation delay time (µs) 0.2 Vs (Max) (V) 5.5 Vs (Min) (V) 2.7 Vos (offset voltage @ 25 C) (Max) (mV) 7 Iq per channel (Typ) (mA) 0.0425 Input bias current (+/-) (Max) (nA) 250 Rail-to-rail Out Rating Catalog Operating temperature range (C) -40 to 125 Features Small Size, Standard comparator VICR (Max) (V) 4.2 VICR (Min) (V) -0.1
Number of channels (#) 2 Output type Open-collector Propagation delay time (µs) 0.2 Vs (Max) (V) 5.5 Vs (Min) (V) 2.7 Vos (offset voltage @ 25 C) (Max) (mV) 7 Iq per channel (Typ) (mA) 0.0425 Input bias current (+/-) (Max) (nA) 250 Rail-to-rail Out Rating Catalog Operating temperature range (C) -40 to 125 Features Small Size, Standard comparator VICR (Max) (V) 4.2 VICR (Min) (V) -0.1
SOIC (D) 8 19 mm² 3.91 x 4.9 SOIC (D) 8 19 mm² 4.9 x 3.9 TSSOP (PW) 8 19 mm² 3 x 6.4 VSSOP (DDU) 8 6 mm² 2 x 3.1 VSSOP (DGK) 8 15 mm² 3 x 4.9
  • 2.7-V and 5-V Performance
  • Low Supply Current
    • LMV331 130 µA Typ
    • LMV393 210 µA Typ
    • LMV339 410 µA Typ
  • Input Common-Mode Voltage Range Includes Ground
  • Low Output Saturation Voltage 200 mV Typical
  • Open-Collector Output for Maximum Flexibility
  • 2.7-V and 5-V Performance
  • Low Supply Current
    • LMV331 130 µA Typ
    • LMV393 210 µA Typ
    • LMV339 410 µA Typ
  • Input Common-Mode Voltage Range Includes Ground
  • Low Output Saturation Voltage 200 mV Typical
  • Open-Collector Output for Maximum Flexibility

The LMV393 and LMV339 devices are low-voltage (2.7 V to 5.5 V) versions of the dual and quad comparators, LM393 and LM339, which operate from 5 V to 30 V. The LMV331 is the single-comparator version.

The LMV331, LMV339, and LMV393 are the most cost-effective solutions for applications where low-voltage operation, low power, and space saving are the primary specifications in circuit design for portable consumer products. These devices offer specifications that meet or exceed the familiar LM339 and LM393 devices at a fraction of the supply current.

The LMV393 and LMV339 devices are low-voltage (2.7 V to 5.5 V) versions of the dual and quad comparators, LM393 and LM339, which operate from 5 V to 30 V. The LMV331 is the single-comparator version.

The LMV331, LMV339, and LMV393 are the most cost-effective solutions for applications where low-voltage operation, low power, and space saving are the primary specifications in circuit design for portable consumer products. These devices offer specifications that meet or exceed the familiar LM339 and LM393 devices at a fraction of the supply current.

Download

Similar products you might be interested in

open-in-new Compare products
Drop-in replacement with upgraded functionality to the compared device.
LM393LV ACTIVE '1.65-V to 5.5-V, low-voltage dual commodity comparator Pin-to-pin upgrade with improved performance and pricing

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 2
Type Title Date
* Data sheet LMV331 Single, LMV393 Dual, LMV339 Quad General-purpose Low-voltage Comparators datasheet (Rev. U) PDF | HTML 10 Nov 2020
E-book The Signal e-book: A compendium of blog posts on op amp design topics 28 Mar 2017

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
User guide: PDF
Reference designs

TIDA-010065 — High-efficiency, low-emission, isolated DC/DC converter-based analog input module reference design

This reference design is a simplified architecture for generating an isolated power supply for isolated amplifiers for measuring isolated voltages and currents. A fully integrated DC/DC converter with reinforced isolation operating from a 5-V input with configurable 5-V or 5.4-V output (headroom (...)
Design guide: PDF
Schematic: PDF
Reference designs

PMP40766 — Universal input, 500-W CC/CV e-Bike charger reference design

This reference design is a universal input, 71.4-V, 7-A constant current, constant voltage (CC/CV) charger for e-bike applications. The UCC28180 device is used for CCM PFC stage for 0.99 power factor and low-current total harmonic distortion. The UCC256403 is used for a half-bridge resonant (...)
Test report: PDF
Schematic: PDF
Package Pins Download
SOIC (D) 8 View options
TSSOP (PW) 8 View options
VSSOP (DDU) 8 View options
VSSOP (DGK) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos