The LP5907-Q1 is a low-noise LDO that can supply 250 mA of output current. Designed to meet the requirements of RF and analog circuits, the LP5907-Q1 provides low noise, high PSRR, low quiescent current, and low line or load transient response figures. Using new innovative design techniques, the LP5907-Q1 offers class-leading noise performance without a noise bypass capacitor and the ability for remote output capacitor placement.
The device is designed to work with a 1-µF input and a 1-µF output ceramic capacitor (no separate noise bypass capacitor is required).
This device is available with fixed output voltages from 1.2 V to 4.5 V in 25-mV steps. Contact Texas Instruments Sales for specific voltage option needs.
Same functionality and pinout but is not an equivalent to the compared device:
LP5912-Q1ACTIVEAutomotive 500-mA, low-noise, low-IQ, low-dropout voltage regulator with reverse current protectionAutomotive 500-mA, low-noise, low-IQ, low-dropout voltage regulator with reverse current protection
TLV733P-Q1ACTIVEAutomotive 300-mA, low-IQ, low-dropout voltage regulator with enableAutomotive 300-mA, low-IQ, low-dropout voltage regulator with enable
NEWTPS745-Q1ACTIVEAutomotive 500-mA, low-IQ, high-PSRR. low-dropout (LDO) voltage regulator with power goodAutomotive 500-mA, low-IQ, high-PSRR. low-dropout (LDO) voltage regulator with Power-Good
Similar but not functionally equivalent to the compared device:
TPS7B82-Q1ACTIVEAutomotive 300-mA, off-battery (40-V), ultra-low-IQ, low-dropout voltage regulator with enableAutomotive 300-mA, off-battery (40 V), ultra-low-IQ, low-dropout voltage regulator with enable
= Top documentation for this product selected by TI
No results found. Please clear your search and try again.View all 8
The MULTIPKGLDOEVM-823 evaluation module (EVM) helps you evaluate the operation and performance of several common packages of linear regulators for possible use in circuit applications. This particular EVM configuration has a DRB, DRV, DQN and DBV footprint for you to solder and (...)
Supports almost all low-dropout (LDO) linear regulators in DBV, DRB, DRV and DQN packages
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
PMP15014 — This solution is designed to be an automotive off-battery front end power supply for infotainment systems. It was created using a one stage power system meeting high voltage input needs and providing low voltage for multi output rails for different load needs. The system also provides transient and (...)
TIDA-050015 — This wide-input power-supply reference design is specifically designed for space-constrained automotive ADAS camera applications. This size-optimized design uses front-end protection paired with a wide input voltage DC/DC converter to enable off-battery operation. The front-end filter and component (...)
TIDA-01003 — The automotive 1MP camera module reference design uses a CMOS imager to provide multiple uncompressed video formats over FPD-Link III. Supported video formats are 8- and 10-bit YUV422. TIs FPD-Link III SerDes technology enables the transmission of video data, bidirectional control signals and power (...)
TIDA-00733 — TIDA-00733 is a reference design for an eight-channel, Class-D amplifier that is capable of driving 2-Ω loads and an off-battery step-down power supply with 5-V and 3.3-V outputs. The amplifier design provides audio inputs for each audio channel. A high-performance audio (...)
TIDA-00535 — The TIDA-00535 reference design provides a power management solution for automotive imaging system using the voltage regulators LP5907-Q1, LP5907 and LM436002-Q1 to provide low noise voltage rails of 1.5V , 1.8 V and 3.3 V to CMOS high dynamic range camera, DS90UB913A-Q1 FPD-Link Serializer (...)