MSP430F2619

ACTIVE

16 MHz MCU with 120KB FLASH, 4KB SRAM, 12-bit ADC, Dual 12-bit DAC, I2C/SPI/UART, HW Multiplier, DMA

Top

Product details

Parameters

Features Non-volatile memory (kB) 120 RAM (KB) 4 ADC 12-bit SAR ADC: channels (#) 8 GPIO pins (#) 48 I2C 2 SPI 2 UART 2 Comparator channels (#) 8 Timers - 16-bit 2 Bootloader (BSL) UART Special I/O Operating temperature range (C) -40 to 105 Rating Catalog open-in-new Find other MSP430 ultra-low-power MCUs

Package | Pins | Size

LQFP (PM) 64 100 mm² 10 x 10 LQFP (PN) 80 196 mm² 14 x 14 NFBGA (ZCA) 113 49 mm² 7 x 7 open-in-new Find other MSP430 ultra-low-power MCUs

Features

  • Low supply voltage range: 1.8 V to 3.6 V
  • Ultra-low power consumption
    • Active mode: 365 µA at 1 MHz, 2.2 V
    • Standby mode (VLO): 0.5 µA
    • Off mode (RAM retention): 0.1 µA
  • Wake up from standby mode in less than 1 µs
  • 16-bit RISC architecture, 62.5-ns instruction cycle time
  • Three-channel internal DMA (MSP430F261x only)
  • 12-bit analog-to-digital converter (ADC) with internal reference, sample-and-hold, and autoscan feature
  • Dual 12-bit digital-to-analog converters (DACs) with synchronization (MSP430F261x only)
  • 16-bit Timer_A with three capture/compare registers
  • 16-bit Timer_B with seven capture/compare registers with shadow registers
  • On-chip comparator
  • Four universal serial communication interfaces (USCIs)
    • USCI_A0 and USCI_A1
      • Enhanced UART supporting automatic baud-rate detection
      • IrDA encoder and decoder
      • Synchronous SPI
    • USCI_B0 and USCI_B1
      • I2C
      • Synchronous SPI
  • Supply voltage supervisor and monitor with programmable level detection
  • Brownout detector
  • Bootloader (BSL)
  • Serial onboard programming, no external programming voltage needed, programmable code protection by security fuse
  • Family members (also see Device Comparison)
    • MSP430F2416
      • 92KB + 256 bytes flash memory
      • 4KB RAM
    • MSP430F2417
      • 92KB + 256 bytes flash memory
      • 8KB RAM
    • MSP430F2418
      • 116KB + 256 bytes flash memory
      • 8KB RAM
    • MSP430F2419
      • 120KB + 256 bytes flash memory
      • 4KB RAM
    • MSP430F2616
      • 92KB + 256 bytes flash memory
      • 4KB RAM
    • MSP430F2617
      • 92KB + 256 bytes flash memory
      • 8KB RAM
    • MSP430F2618
      • 116KB + 256 bytes flash memory
      • 8KB RAM
    • MSP430F2619
      • 120KB + 256 bytes flash memory
      • 4KB RAM
  • Available in 80-pin quad flat pack (LQFP), 64-pin LQFP, and 113-pin ball grid array (nFBGA)

All trademarks are the property of their respective owners.

open-in-new Find other MSP430 ultra-low-power MCUs

Description

The Texas Instruments MSP430™ family of ultra-low-power microcontrollers consists of several devices featuring different sets of peripherals targeted for various applications. The architecture, combined with five low-power modes is optimized to achieve extended battery life in portable measurement applications. The device features a powerful 16-bit RISC CPU, 16-bit registers, and constant generators that contribute to maximum code efficiency. The calibrated digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 1 µs.

The MSP430F261x and MSP430F241x series are microcontroller configurations with two built-in 16-bit timers, a fast 12-bit ADC, a comparator, two 12-bit DACs, four USCI modules, DMA, and up to 64 I/O pins. The MSP430F241x devices are identical to the MSP430F261x devices, with the exception that the DAC12 and the DMA modules are not implemented.

The LQFP-64 package is also available as a nonmagnetic package for medical imaging applications.

For complete module descriptions, see the MSP430F2xx, MSP430G2xx Family User’s Guide.

open-in-new Find other MSP430 ultra-low-power MCUs
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 38
Type Title Date
* Datasheet MSP430F261x, MSP430F241x Mixed-Signal Microcontrollers datasheet (Rev. L) May 01, 2020
* Errata MSP430F2619 Device Erratasheet (Rev. S) Apr. 21, 2020
* User guides MSP430x2xx Family User's Guide (Rev. J) Jul. 01, 2013
Application notes MSP430 System ESD Troubleshooting Guide Dec. 13, 2019
Application notes ESD Diode Current Specification (Rev. A) Jul. 10, 2019
Application notes Migrating from MSP430 F2xx and G2xx families to MSP430 FR4xx and FR2xx family (Rev. F) Mar. 26, 2019
Application notes Programming a Flash-Based MSP430 MCU Using the JTAG Interface (Rev. H) Mar. 15, 2019
White papers Debunking the Ultra-low Power Comparison: MSP430F2x MCUs vs. Microchip XLP Tech (Rev. A) Feb. 26, 2019
Application notes Interfacing the 3-V MSP430 MCU to 5-V Circuits (Rev. A) Oct. 03, 2018
Application notes Migrating From MSP430F16x MCUs to MSP430F261x MCUs (Rev. B) Sep. 26, 2018
Application notes MSP430 Flash Memory Characteristics (Rev. B) Aug. 24, 2018
Application notes Understanding MSP430 Flash Data Retention (Rev. A) Aug. 24, 2018
Application notes Mixing C and Assembler With MSP430™ MCUs (Rev. A) Aug. 07, 2018
Application notes Using the TPS3619 With MSP430 Microcontrollers (Rev. B) Aug. 06, 2018
Application notes MSP430 LFXT1 Oscillator Accuracy (Rev. A) Aug. 03, 2018
Application notes Efficient Multiplication and Division Using MSP430 MCUs (Rev. A) Jul. 18, 2018
Application notes CRC Implementation with MSP430 MCUs (Rev. A) Jun. 21, 2018
Application notes Implementing An Ultra-Low-Power Keypad Interface With MSP430 MCUs (Rev. A) May 22, 2018
Application notes Li-Ion Battery Charger Solution Using an MSP430™ MCU (Rev. A) May 18, 2018
Application notes Random Number Generation Using MSP430™ MCUs (Rev. A) May 16, 2018
Application notes Wave Digital Filtering Using an MSP430 MCU (Rev. A) May 16, 2018
Application notes Software Coding Techniques for MSP430™ MCUs (Rev. B) Mar. 14, 2018
Application notes MSP430 32-kHz Crystal Oscillators (Rev. D) Jul. 18, 2017
Application notes Migrating from the MSP430F2xx,G2xx Family to the MSP430FR58xx/FR59xx/68xx/69xx (Rev. E) Nov. 03, 2016
Application notes Advanced Debugging Using the Enhanced Emulation Module (EEM) With CCS v6 (Rev. F) Sep. 06, 2016
Application notes General Oversampling of MSP ADCs for Higher Resolution (Rev. A) Apr. 01, 2016
Technical articles “Touching” the smart grid infrastructure space with capacitive sensing technology Mar. 31, 2016
Technical articles Don’t miss out on the top training videos of 2015 Dec. 16, 2015
Application notes MSP Code Protection Features Dec. 07, 2015
Technical articles How fast is your 32-bit MCU? Jul. 15, 2015
Technical articles Lose power, not data with new FRAM microcontrollers May 20, 2015
Application notes Design Considerations When Using the MSP430 Graphics Library Oct. 05, 2012
Application notes Migrating from the USCI Module to the eUSCI Module (Rev. A) Sep. 13, 2012
White papers Power Management Solutions for Ultra-Low-Power 16-Bit MSP430 MCUs (Rev. D) Mar. 28, 2012
Application notes Migrating from the MSP430F2xx Family to the MSP430FR57xx Family (Rev. A) Feb. 16, 2012
Application notes Powering the MSP430 from a High Voltage Input using the TPS62122 (Rev. C) Jan. 12, 2012
Application notes 1.8V – 5.5V Input, High-Efficiency DCDC Converter Reference Design for MSP430 (Rev. B) Jun. 14, 2010
Application notes Tiny DCDC Converter Reference Design (Rev. A) Jun. 14, 2010

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
190
Description

The MSP-FET430U80 is a powerful flash emulation tool that includes the hardware and software required to quickly begin application development on the MSP430 MCU. It includes a ZIF socket target board and a USB debugging interface (MSP-FET) used to program and debug the MSP430 in-system through the (...)

Features
  • USB debugging interface (MSP-FET) connects a flash-based MSP430 MCU to a PC for real-time, in-system programming and debugging
  • Technical specifications:
    • Software configurable supply voltage between 1.8 and 3.6 volts at 100mA
    • Supports JTAG Security Fuse blow to protect code
    • Supports all MSP430 boards (...)
DEVELOPMENT KITS Download
document-generic User guide
89
Description

The MSP-TS430PM64 is a standalone ZIF socket target board used to program and debug the MSP430 MCU in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol.

Device Support: The MSP-TS430PM64 development board supports MSPF13x, MSP430F14x, MSP430F14x1, MSP430F15x, MSP430F16x (...)

Features
  • Development board (MSP-TS430PM64) with a ZIF socket fitting MSP430 derivatives in 64-pin LQFP (PM) packages includes an LED indicator, JTAG adapter, and header pin-outs for prototyping
  • Supports all debugging interfaces using a standard 14-pin JTAG header such as the MSP-FET430UIF
DEVELOPMENT KITS Download
document-generic User guide
89
Description

The MSP-TS430PN80 is a standalone ZIF socket target board used to program and debug the MSP430 MCU in-system through the JTAG interface or the Spy Bi-Wire (2-wire JTAG) protocol.

Device Support: The MSP-TS430PN80 development board supports MSP430F241x, MSP430F261x, MSP430F43x, MSP430F43x1 (...)

Features
  • Development board (MSP-TS430PN80) with a ZIF socket fitting some MSP430 derivatives in 80-pin LQFP (PN) packages includes an LED indicator, JTAG adapter, and header pin-outs for prototyping
  • Supports all debugging interfaces using a standard 14-pin JTAG header such as the MSP-FET430UIF

Software development

SOFTWARE DEVELOPMENT KITS (SDK) Download
MSP430Ware for MSP Microcontrollers
MSPWARE MSP430Ware is a collection of resources that help users to effectively create and build MSP430 code. These resources support ALL MSP430 microcontrollers (MCUs). As one user mentioned, “It’s essentially everything developers need to become MSP430 microcontroller experts!”

This complete collection of (...)

Features
  • Collection of MSP design resources
  • Available within CCS, as a standalone executable, or as part of TI’s new Cloud-based tools
  • Auto-updates through the web
  • Sleek & intuitive GUI for browsing content
  • Features the MSP Driver Library
  • Automatic filtering of content using a unique 2-pane view
CODE EXAMPLES & DEMOS Download
SLAC151K.ZIP (730 KB)
DRIVERS & LIBRARIES Download
Digital Signal Processing (DSP) Library for MSP430 Microcontrollers
MSP-DSPLIB — The Texas Instruments MSP430™ Digital Signal Processing library is a set of highly optimized functions to perform many common signal processing operations on fixed-point numbers for MSP430 microcontrollers. This function set is typically used in applications where processing-intensive (...)
DRIVERS & LIBRARIES Download
MSP Graphics Library
MSP-GRLIB The MSP Graphics Library is a royalty-free set of graphics primitives for creating graphical user interfaces on MSP430 and MSP432 microcontroller-based boards that have a graphical display. The graphical library consists of two building layers of functionality: the display driver layer, specific to (...)
Features
  • Free license and royalty-free use
  • Simplify and accelerate developmen tof applications
  • Easy-to-maintain code
DRIVERS & LIBRARIES Download
Fixed Point Math Library for MSP
MSP-IQMATHLIB The Texas Instruments® MSP IQmath and Qmath Libraries are a collection of highly optimized and high-precision mathematical functions for C programmers to seamlessly port a floating-point algorithm into fixed-point code on MSP430 and MSP432 devices. These routines are typically used in (...)
Features
  • Optimized fixed point functions - reduce development time and enable developers to focus on optimizing application code
  • Up to 100x higher performance when executing common fixed point scalar math functions in CCS – this means the MSP microcontroller can remain in low power modes longer than (...)
DRIVERS & LIBRARIES Download
Bootloader (BSL) for MSP low-power microcontrollers
MSPBSL The bootloader (BSL) on MSP430™ microcontrollers (MCUs) lets users communicate with embedded memory in the MSP MCUs during the prototyping phase, final production, and in service. This is done through standard interfaces such as UART, I2C, SPI, and USB. Both the programmable memory (...)
IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
Code Composer Studio™ Integrated Development Environment for MSP Microcontrollers
CCSTUDIO-MSP

Code Composer Studio is an integrated development environment (IDE) that supports TI's Microcontroller and Embedded Processors portfolio. Code Composer Studio comprises a suite of tools used to develop and debug embedded applications. It includes an optimizing C/C++ compiler, source code editor (...)

IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
EnergyTrace Technology
ENERGYTRACE EnergyTrace™ software for MSP430™ MCUs, MSP432™ MCUs, CC13xx wireless MCUs and CC26xx wireless MCUs is an energy-based code analysis tool that measures and displays the energy profile of an application and helps optimize it for ultra-low-power consumption.

As most developers know, it is difficult to (...)

Features
  • Current measurement is enabled for all MSP430 MCUs, MSP432 MCUs and connectivity devices
  • Tracing of CPU states is available on selected MSP430 MCUs, MSP432 MCUs, CC13x2 wireless MCUs and CC26x2 wireless MCUs 
  • Tracing of peripheral states is also available on selected MSP430 MCUs, CC13x2 (...)
IDES, CONFIGURATION, COMPILERS & DEBUGGERS Download
IAR Embedded Workbench
Provided by IAR Systems IAR Embedded Workbench for MSP430 (EW430)
IAR Embedded Workbench for MSP430 is a complete debugger and C/C++ compiler toolchain for building and debugging embedded applications based on MSP430 microcontrollers. The Debugger is a fully integrated debugger for source and disassembly level debugging (...)
PROGRAMMING TOOLS Download
MSP MCU Programmer and Debugger
MSP-FET The MSP-FET is a powerful emulation development tool – often called a debug probe – which allows users to quickly begin development on MSP low-power microcontrollers (MCU).

It supports programming and real-time debugging over both JTAG and SBW interfaces. Furthermore, the MSP-FET also provides a (...)

115
Features
  • USB debugging interface to connect any MSP430 MCU to a computer for real-time, in-system programming and debugging
  • Enables EnergyTrace™ technology for energy measurement and debugging on all MSP430 and MSP432 devices in the Code Composer Studio and IAR Embedded Workbench development environments
  • (...)
PROGRAMMING TOOLS Download
MSP-GANG Production Programmer
MSP-GANG The MSP Gang Programmer (MSP-GANG) is a MSP430™/MSP432™ device programmer that can program up to eight identical MSP430/MSP432 Flash or FRAM devices at the same time. It connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow (...)
Features
  • Quickly and reliably program Flash or FRAM-based MSP devices via RS-232 or USB interface
  • Several programming modes:
    • Interactive Mode – Programming while connected to PC using the MSP GANG Programmer GUI
    • Program from Image – An image can be stored, which contains configuration options and code (...)
PROGRAMMING TOOLS Download
UniFlash stand-alone flash tool for microcontrollers, Sitara™; processors and SimpleLink™
UNIFLASH Supported devices: CC13xx, CC25xx, CC26xx, CC3x20, CC3x30, CC3x35, Tiva, C2000, MSP43x, Hercules, PGA9xx, IWR12xx, IWR14xx, IWR16xx, IWR18xx , IWR68xx, AWR12xx, AWR14xx, AWR16xx, AWR18xx.  Command line only: AM335x, AM437x, AM571x, AM572x, AM574x, AM65XX, K2G

CCS Uniflash is a standalone tool used to (...)

Design tools & simulation

CAD/CAE SYMBOLS Download
SLAC060E.ZIP (97 KB)

CAD/CAE symbols

Package Pins Download
BGA MICROSTAR JUNIOR (ZQW) 113 View options
LQFP (PM) 64 View options
LQFP (PN) 80 View options
NFBGA (ZCA) 113 View options

Ordering & quality

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos