Dual high precision, low noise operational amplifiers
Product details
Parameters
Package | Pins | Size
Features
- Low Noise: 3nV/√Hz
- Wide Bandwidth:
- OPA227: 8 MHz, 2.3 V/µs
- OPA228: 33 MHz, 10 V/µs
- Settling Time: 5 µs
(Significant Improvement Over OP-27) - High CMRR: 138 dB
- High Open-loop Gain: 160 dB
- Low Input Bias Current: 10 nA Maximum
- Low Offset Voltage: 75 µV Maximum
- Wide Supply Range: ±2.5 V to ±18 V
- OPA227 Replaces OP-27, LT1007, MAX427
- OPA228 Replaces OP-37, LT1037, MAX437
- Single, Dual, and Quad Versions
Description
The OPAx22x series operational amplifiers combine low noise and wide bandwidth with high precision to make them the ideal choice for applications requiring both AC and precision DC performance.
The OPAx227 is unity-gain stable and features high slew rate (2.3V/µs) and wide bandwidth (8MHz). The OPAx228 is optimized for closed-loop gains of 5 or greater, and offers higher speed with a slew rate of 10V/µs and a bandwidth of 33MHz.
The OPAx227 and OPAx228 series operational amplifiers are ideal for professional audio equipment. In addition, low quiescent current and low cost make them ideal for portable applications requiring high precision.
The OPAx227 and OPAx228 series operational amplifiers are pin-for-pin replacements for the industry standard OP-27 and OP-37 with substantial improvements across the board. The dual and quad versions are available for space savings and per channel cost reduction.
The OPAx227, OPAx228, are available in DIP-8 and SO-8 packages. The OPA4227 and OPA4228 are available in DIP-14 and SO-14 packages with standard pin configurations. Operation is specified from –40°C to 85°C.
Similar products you might be interested in
Exact equivalent in functionality and parametrics to the compared device:
Technical documentation
= Top documentation for this product selected by TI
| Type | Title | Date | |
|---|---|---|---|
| * | Datasheet | OPAx22x High Precision, Low Noise Operational Amplifiers datasheet (Rev. B) | Jun. 30, 2015 |
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | Mar. 28, 2017 | |
| Application note | OPA227, OPA2227, OPA4227, OPA228, OPA2228, OPA4228 EMI Immunity Performance (Rev. A) | Nov. 02, 2012 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.Hardware development
Description
The ADS5231EVM is designed to provide ease of use in evaluating the performance of the dual 12-bit, 40 MSPS ADS5231 analog to digital converter which features CMOS outputs. The ADS5231EVM can be paired with the ADC digital capture card, the TSW1100, for quick evaluation of the device's performance.
Features
- Easy testing of the ADS5231
- Single-ended, transformer coupled inputs
- THS4503 amplifier input path
- Internal reference generation or external reference generation using the OPA2227
- Fully buffered outputs utilizing the SN74AVC16244
- Compatible with the TSW1100
Description
The ADS5232EVM is designed to provide ease of use in evaluating the performance of the dual 12-bit, 65 MSPS analog to digital converter which features a CMOS outputs. The ADS5232EVM can be paired with the ADC digital capture card, the TSW1100, for quick evaluation of the device's performance.
Features
- Easy testing of the ADS5232
- Single-ended, transformer coupled inputs
- THS4503 amplifier input path
- Internal reference generation or external reference generation using the OPA2227
- Fully buffered outputs utilizing the SN74AVC16244
- Compatible with the TSW1100
DIP-ADAPTER-EVM
Description
Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.
The (...)
Features
- Simplifies prototyping of SMT IC’s
- Supports 6 common package types
- Low Cost
Description
The DIYAMP-EVM is a unique evaluation module (EVM) family that provides engineers and do it yourselfers (DIYers) with real-world amplifier circuits, enabling you to quickly evaluate design concepts and verify simulations. It is available in three industry-standard packages (SC70, SOT23, SOIC) and 12 (...)
Features
- 3 packages to choose from: SC70-5, SOT23-5 and SOIC-8
- 12 circuit configurations to choose from: Noninverting, Inverting, Active Filters, Difference Amp, Comparator and more!
- Dual and single supply configurations
- PCB designed for High performance: Optimized for each function
- Multiple interface options (...)
Description
The Universal OPAMPEVM is a series of general purpose blank circuit boards that simplify prototyping circuits for a variety of IC package types. The evaluation module board design allows many different circuits to be constructed easily and quickly. Five models are offered with each targeted for (...)
Design tools & simulation
SBOC188C.TSC (1083 KB) - TINA-TI Reference Design
SBOM051C.ZIP (14 KB) - PSpice Model
SBOM267B.ZIP (9 KB) - TINA-TI Spice Model
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
- Leverages Cadence PSpice Technology
- Preinstalled library with a suite of digital models to enable worst-case timing analysis
- Dynamic updates ensure you have access to most current device models
- Optimized for simulation speed without loss of accuracy
- Supports simultaneous analysis of multiple products
- (...)
TINA-TI — TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
ANALOG-ENGINEER-CALC — The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Features
- Expedites circuit design with analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)
- Noise calculations
- Common unit translation
- Solves common amplifier circuit design problems
- Gain selections using standard resistors
- Filter configurations
- Total noise for common amplifier configurations
- (...)
OPAMP-NOISECALC — This folder contains three tools to help in understandning and managing noise in cicuits. The included tools are:
- A noise generator tool - This is a Lab View 4-Run Time executable that generates Gaussian white noise, uniform white noise, 1/f noise, short noise, and 60Hz line noise. Temporal data (...)
CIRCUIT060001 — This single–supply, low–side, current sensing solution accurately detects load current up to 1A and converts it to a voltage between 50mV and 4.9V. The input current range and output voltage range can be scaled as necessary and larger supplies can be used to accommodate larger swings.
Features
- Senses Temperature between 25°C - 50°C
- Output: 0.05V - 3.25V
- Single 3.3V Supply with half-supply reference
CIRCUIT060002 — This temperature sensing circuit uses a resistor in series with a negative–temperature–coefficient (NTC) thermistor to form a voltage divider, which has the effect of producing an output voltage that is linear over temperature. The circuit uses an op amp in a non–inverting (...)
Features
- Senses Temperature between 25°C - 50°C
- Output: 0.05V - 3.25V
- Single 3.3V Supply with half-supply reference
CIRCUIT060003 — This temperature sensing circuit uses a resistor in series with a positive–temperature–coefficient (PTC) thermistor to form a voltage–divider, which has the effect of producing an output voltage that is linear over temperature. The circuit uses an op amp in a non–inverting (...)
Features
- Senses Temperature between 0°C - 50°C
- Output: 0.05V - 3.25V
- Single 3.3V Supply with half-supply reference
CIRCUIT060004 — This two stage amplifier design amplifies and filters the signal from a passive infrared (PIR) sensor. The circuit includes multiple low–pass and high–pass filters to reduce noise at the output of the circuit to be able to detect motion at long distances and reduce false triggers. This (...)
Features
- Single 5V Supply
- Passes frequencies between 0.7Hz - 10Hz
- AC Gain: 90dB
CIRCUIT060005 — This single–supply, high–side, low–cost current sensing solution detects load current between 50mA and 1A and converters it to an output voltage from 0.25V to 5V. High–side sensing allows for the system to identify ground shorts and does not create a ground disturbance on the load.
Features
- Single 36V supply
- Input: 50mA to 1A
- Output: 0.25V to 5V
CIRCUIT060006 — A strain gauge is a sensor whose resistance varies with applied force. To measure the variation in resistance, the strain gauge is placed in a bridge configuration. This design uses a 2 op amp instrumentation circuit to amplify a differential signal created by the change in resistance of a strain (...)
Features
- Single 5V supply with half-supply reference
- Input: -2.22mV to 2.27mV differential
- Output: 225mV - 4.72V
- Strain gauge resistance variation: 115 - 125 Ohms
- Gain: 1001V/V
CIRCUIT060007 — This single-supply low-side, bidirectional current sensing solution can accurately detect load currents from –1A to 1A. The linear range of the output is from 110mV to 3.19V. Low-side current sensing keeps the common-mode voltage near ground, and is thus most useful in applications with large (...)
Features
- Single 5V supply with half-supply reference
- Input: -2.22mV to 2.27mV differential
- Output: 225mV - 4.72V
- Strain gauge resistance variation: 115 - 125 Ohms
- Gain: 1001V/V
CIRCUIT060008 — This absolute value circuit can turn alternating current (AC) signals to single polarity signals. This circuit functions with limited distortion for ±10-V input signals at frequencies up to 50kHz and for signals as small as ±25mV at frequencies up to 1kHz.
Features
- 30V Split supply with ground reference
- Input: +/-25mV to +/-10V
- Output: 25mV to 10V
CIRCUIT060009 — The precision half-wave rectifier inverts and transfers only the negative-half input of a time varying input signal (preferably sinusoidal) to its output. By appropriately selecting the feedback resistor values, different gains can be achieved. Precision half-wave rectifiers are commonly used with (...)
Features
- 5V Split supply
- Input: +/-0.2mVpp to +/-4Vpp
- Output: 0.1V to 2V
CIRCUIT060010 — This circuit utilizes a triangle wave generator and comparator to generate a 500 kHz pulse-width modulated (PWM) waveform with a duty cycle that is inversely proportional to the input voltage. An op amp and comparator generate a triangle waveform which is applied to the inverting input of a second (...)
Features
- 5V Single supply with half-supply reference
- Input: -2V to 2V
- Output: 0V to 5V
CAD/CAE symbols
| Package | Pins | Download |
|---|---|---|
| PDIP (P) | 8 | View options |
| SOIC (D) | 8 | View options |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.