Top

Product details

Parameters

Number of channels (#) 4 Total supply voltage (Max) (+5V=5, +/-5V=10) 36 Total supply voltage (Min) (+5V=5, +/-5V=10) 2.7 Rail-to-rail In to V-, Out GBW (Typ) (MHz) 3 Slew rate (Typ) (V/us) 1.5 Vos (offset voltage @ 25 C) (Max) (mV) 1.8 Iq per channel (Typ) (mA) 0.475 Vn at 1 kHz (Typ) (nV/rtHz) 14 Rating Catalog Operating temperature range (C) -40 to 125 Offset drift (Typ) (uV/C) 0.3 Features EMI Hardened Input bias current (Max) (pA) 15 CMRR (Typ) (dB) 120 Output current (Typ) (mA) 25 Architecture CMOS open-in-new Find other General-purpose op amps

Package | Pins | Size

SOIC (D) 14 52 mm² 8.65 x 6 TSSOP (PW) 14 32 mm² 5 x 6.4 open-in-new Find other General-purpose op amps

Features

  • Supply range: 2.7 to 36 V, ±1.35 V to ±18 V
  • Low noise: 14 nV/√Hz
  • Low offset drift: ±0.3 µV/°C (typical)
  • RFI filtered inputs
  • Input range includes the negative supply
  • Input range operates to positive supply
  • Rail-to-rail output
  • Gain bandwidth: 3 MHz
  • Low quiescent current: 475 µA per amplifier
  • High common-mode rejection: 120 dB (typical)
  • Low-input bias current: 8 pA
  • Industry-standard packages:
    • 8-pin SOIC
    • 8-pin MSOP
    • 14-pin TSSOP
  • Micro packages:
    • Single in SOT-553
    • Dual in VSSOP-8

All trademarks are the property of their respective owners.

open-in-new Find other General-purpose op amps

Description

The OPA171, OPA2171, and OPA4171 (OPAx171) are a family of 36-V, single-supply, low-noise operational amplifiers with the ability to operate on supplies ranging from 2.7 V (±1.35 V) to 36 V (±18 V). These devices are available in micro-packages and offer low offset, drift, and bandwidth with low quiescent current. The single, dual, and quad versions all have identical specifications for maximum design flexibility.

Unlike most operational amplifiers, which are specified at only one supply voltage, the OPAx171 family is specified from 2.7 to 36 V. Input signals beyond the supply rails do not cause phase reversal. The OPAx171 family is stable with capacitive loads up to 300 pF. The input can operate 100 mV below the negative rail and within 2 V of the top rail during normal operation. These devices can operate with full rail-to-rail input 100 mV beyond the top rail, but with reduced performance within 2 V of the top rail.

The OPAx171 series of operational amplifiers are specified from –40°C to +125°C.

open-in-new Find other General-purpose op amps
Download
Similar products you might be interested in
open-in-new Compare products
Exact equivalent in functionality and parametrics to the compared device:
NEW OPA4991 ACTIVE 40-V, dual 4.5-MHz, rail-to-rail input/output, low-offset-voltage, low-noise op amp Pin-to-pin upgrade with improved performance: lower Vos(0.75mV) and noise(10nV/√Hz), higher slew rate(21V/us) and output current(75mA)

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 8
Type Title Date
* Datasheet OPAx171 36-V, Single-Supply, SOT-553, General-Purpose Operational Amplifiers datasheet (Rev. G) May 22, 2020
Technical articles What is an op amp? Jan. 21, 2020
E-book Analog Engineer’s Pocket Reference Guide Fifth Edition (Rev. C) Nov. 30, 2018
Technical articles How to lay out a PCB for high-performance, low-side current-sensing designs Feb. 06, 2018
Technical articles Low-side current sensing for high-performance cost-sensitive applications Jan. 22, 2018
Technical articles Voltage and current sensing in HEV/EV applications Nov. 22, 2017
E-book The Signal e-book: A compendium of blog posts on op amp design topics Mar. 28, 2017
Application note OPA171 EMI Immunity Performance Mar. 29, 2016

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
Description

The Universal OPAMPEVM is a series of general purpose blank circuit boards that simplify prototyping circuits for a variety of IC package types. The evaluation module board design allows many different circuits to be constructed easily and quickly. Five models are offered with each targeted for (...)

Design tools & simulation

SIMULATION MODEL Download
SBOM440B.ZIP (14 KB) - PSpice Model
SIMULATION MODEL Download
SBOM441B.ZIP (9 KB) - TINA-TI Spice Model
SIMULATION MODEL Download
SBOM442C.TSC (357 KB) - TINA-TI Reference Design
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
SIMULATION TOOL Download
SPICE-based analog simulation program
TINA-TI TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
CALCULATION TOOL Download
Analog engineer's calculator
ANALOG-ENGINEER-CALC — The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Features
  • Expedites circuit design with analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)
    • Noise calculations
    • Common unit translation
  • Solves common amplifier circuit design problems
    • Gain selections using standard resistors
    • Filter configurations
    • Total noise for common amplifier configurations
  • (...)

Reference designs

REFERENCE DESIGNS Download
IEPE Sensor analog front-end with digital interface reference design
TIDA-010045 — Industrial vibration sensing is a crucial process in condition monitoring, which is necessary for predictive maintenance. An integrated electronic piezoelectric (IEPE)TM sensor is the most common vibration sensor used in the industrial environment. This design is simple sensor analog front-end (...)
document-generic Schematic
REFERENCE DESIGNS Download
High Accuracy ±0.5% Current and Isolated Voltage Measurement Ref Design Using 24-Bit Delta-Sigma ADC
TIDA-00835 The TIDA-00835 reference design allows for accurate voltage and current measurement using a bipolar input configuration by incorporating a four- channel, 24-bit simultaneously-sampling differential input Delta-Sigma ADC over wide dynamic range. The ADC is configured to measure ±2.5 V bipolar (...)
document-generic Schematic

CAD/CAE symbols

Package Pins Download
SOIC (D) 14 View options
TSSOP (PW) 14 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos